C9900-M423
|
Toolboard for keyboard, tools or mouse, can be mounted under the
Panel PC CP3xxx, with 2 integrated USB sockets IP 65 at the back side,
rear cable channel for mouse and keyboard cables.
Can only be ordered together with the Control Panel or Panel PC.
|
Beckhoff Vietnam
|
C9900-M424
|
Toolboard for keyboard or tools, mounted under a Control Panel or
Panel PC CP3xxx, with 2 integrated USB sockets IP 65 at the back side
|
Beckhoff Vietnam
|
C9900-M425
|
Toolboard for keyboard or tools, can be mounted under the Panel PC
CP3219-1040-0010 or CP3219-1041-0010. Only tableau, without holder.
Similar to the toolboard C9900-M406
|
Beckhoff Vietnam
|
C9900-M426
|
Toolboard for keyboard, tools or mouse, can be mounted under the
Panel PC CP3219-1040-0010 or CP3219-1041-0010.
Special length and rear cable channel for mouse and keyboard cables
(Similar to the toolboard C9900-M423, only tableau, without holder)
|
Beckhoff Vietnam
|
C9900-M428
|
Mounting arm adapter plate at the Panel-PC CP77xx for mounting arm
system Bernstein CS-2000 SL part no. 101.5.2510.00, 101.5.2520.00,
101.5.2530.00, 101.5.2540.00, wiring through the mounting arm
|
Beckhoff Vietnam
|
C9900-M433
|
Mounting arm adapter plate at the Panel-PC CP77xx for mounting arm
system VESA FPMPMI distance of holes 75 x 75 mm, wiring via the
backplane
|
Beckhoff Vietnam
|
C9900-M434
|
Mounting arm adapter plate at the Panel-PC CP77xx for mounting arm
system VESA FPMPMI distance of holes 100 x 100 mm, wiring via the
backplane
|
Beckhoff Vietnam
|
C9900-M435
|
Mounting arm adapter plate at the Panel-PC CP77xx for mounting arm
system Rittal CP6206.490, cables installed through the
mounting arm
|
Beckhoff Vietnam
|
C9900-M436
|
Mounting arm adapter plate at the Panel-PC CP77xx for mounting arm
system Rolec wall joint part no. 149.010.000, mounting arm
from top or bottom, wiring through the mounting arm
|
Beckhoff Vietnam
|
C9900-M437
|
Mounting arm adapter plate at the Panel PC CP770x-000x or CP77xx-0000,
for mounting arm system Rittal coupling CP6508.020 or CP6501.170,
with 2x 2 port USB socket, DIN 8 pin with screw-on cap IP 65 with
adapter cable from DIN 8 pin to 2x USB cables, installed through the
mounting arm
|
Beckhoff Vietnam
|
C9900-M483
|
Toolboard for keyboard or tools, with area for mouse and with hole
For cable bushing, can be mounted under a CP7xx2 with push-button
extension. Without rubber mat and without fold
Width of the toolboard: 727,4 mm
Spacing of the mounting holes: 160,0 mm
|
Beckhoff Vietnam
|
C9900-M485
|
Customised toolboard for keyboard or tools, can be mounted under the
Push button extension C9900-M984(CP3924-1037).
|
Beckhoff Vietnam
|
C9900-M486
|
Toolboard for keyboard, tools or mouse, for mounting under a customised
Control Panel or Panel PC CP3xxx-1xxx, without integrated USB socket IP 65
at the back side, special length and rear cable channel for mouse and keyboard cables
|
Beckhoff Vietnam
|
C9900-M488
|
Toolboard for keyboard and mouse, mountable under a Control Panel
or Panel PC CP3xxx, special length with separate part for mouse,
gummed, cablechannel on the backside.
|
Beckhoff Vietnam
|
C9900-M503
|
Vibration absorbing hard disk mounting plate for control cabinet pc
C6240-1037. Mountig plate for one or two hard disks
|
Beckhoff Vietnam
|
C9900-M504
|
wire cable damper system and mounting frame for C6930
|
Beckhoff Vietnam
|
C9900-M551
|
PC housing C51xx without handles instead of standard housing with
handles
|
Beckhoff Vietnam
|
C9900-M552
|
Customer specific C6330 housing with 2 D-Sub connectors for COM1 and
COM2 installed inside the top cover of C6330
|
Beckhoff Vietnam
|
C9900-M554
|
Customer specific C63xx internal chassis for installation of a
Lightbus master interface module CX1500-M200
|
Beckhoff Vietnam
|
C9900-M557
|
PC housing C5102
- with rubber footings at the left side for installation as a
standing tower housing
- sideparts without handles, without nooks, with flat surface
- distance frame for the internal fan for noise reduction
instead of standard housing with handles and nooks
|
Beckhoff Vietnam
|
C9900-M559
|
Side parts for PC housing C5102 or C5240, without handles, without
mounting angles, with flat surface, instead of standard side parts
with handles
|
Beckhoff Vietnam
|
C9900-M563
|
MICSY PC housing C51xx with distance frame for the internal fan for noise reduction instead of standard housing
|
Beckhoff Vietnam
|
C9900-M564
|
MICSY C51xx C9900-M564, C510x mit
- Gummifüßen an der Unterseite für die Aufstellung als Desktopgehäuse
- Seitenteile ohne Griffe, ohne Winkel, mit glatter Oberfläche
|
Beckhoff Vietnam
|
C9900-M566
|
Side parts for PC housing C5102 or C5240, without handles, with
mounting angles, instead of standard side parts with handles
|
Beckhoff Vietnam
|
C9900-M568
|
Slot bracket for one serial port C9900-E209, C9900-E210, C9900-E211.
Can be ordered only together with on module.
|
Beckhoff Vietnam
|
C9900-M569
|
Slot bracket for two serial ports C9900-E209, C9900-E210, C9900-E211.
Can be ordered only together with two modules.
|
Beckhoff Vietnam
|
C9900-M571
|
connector bracket for one serial port module C9900-E209, C9900-E210
or C9900-E211, to be mounted inside a C66xx in front of the ATX
connector bracket. Can be ordered together with one module, only.
|
Beckhoff Vietnam
|
C9900-M573
|
connector bracket for mounting a PS/2 plug at a C66xx, incl. 2 screws
|
Beckhoff Vietnam
|
C9900-M575
|
vertical orientation of the display inside the Control Panel or
Panel PC CP22xx, CP26xx, CP29xx or CP39xx instead of standard Control
Panel or standard Panel PC
|
Beckhoff Vietnam
|
C9900-M576
|
PC housing C5102 sideparts without handles, with nooks, instead of
standard pc housing
|
Beckhoff Vietnam
|
C9900-M578
|
3 additional 5¼ inch drive slots inside the 19-inch slide-in
Industrial PC C5240
|
Beckhoff Vietnam
|
C9900-M617
|
Removable frame for a 3½ inch hard disk
|
Beckhoff Vietnam
|
C9900-M622
|
wall mounting frame for uninterruptible power supply C9900-U120 and
C9900-U122
|
Beckhoff Vietnam
|
C9900-M623
|
wall mounting frame for uninterruptible power supply C9900-U120,
C9900-U122 and C9900-U124
|
Beckhoff Vietnam
|
C9900-M624
|
wall mounting frame for uninterruptible power supply C9900-U122
|
Beckhoff Vietnam
|
C9900-M630
|
cable carrier chain for C6240
|
Beckhoff Vietnam
|
C9900-M631
|
cable carrier chain for C6250
|
Beckhoff Vietnam
|
C9900-M632
|
C6640 drive frame for a hard disk incl. screws
|
Beckhoff Vietnam
|
C9900-M633
|
Removable frame for a 3.5 inch hard disk for C5102-00x0,
hard disk mounted into a removable drawer
|
Beckhoff Vietnam
|
C9900-M634
|
Removable frame for two 2.5 inch SSDs, instead of a removable frame
for a 3.5 inch hard disk
|
Beckhoff Vietnam
|
C9900-M653
|
mounting plate at the side wall, instead of plate at the rear wall
|
Beckhoff Vietnam
|
C9900-M659
|
Removable frame for a serial ATA hard disk with SATA cable for
Industrial PC C6240-1025
|
Beckhoff Vietnam
|
C9900-M664
|
Mounting plate for C601x at the side wall, instead of plate at the
rear wall
|
Beckhoff Vietnam
|
C9900-M665
|
Mounting plate for the lateral installation of the C601x,
separate part, not mounted
|
Beckhoff Vietnam
|
C9900-M666
|
Mounting plate with DIN rail mounting adapter for C601x,
instead of standard mounting plate
|
Beckhoff Vietnam
|
C9900-M667
|
Mounting plate with DIN rail mounting adapter for C601x,
separate part, not mounted
|
Beckhoff Vietnam
|
C9900-M668
|
Mounting plate for the lateral installation of the C6030, instead of
plate at the rear wall
|
Beckhoff Vietnam
|
C9900-M669
|
Mounting plate for the lateral installation of the C6030,
separate part, not mounted
|
Beckhoff Vietnam
|
C9900-M670
|
Mounting plate with DIN rail mounting adapter for C6030,
instead of standard mounting plate
|
Beckhoff Vietnam
|
C9900-M671
|
Mounting plate with DIN rail mounting adapter for C6030
|
Beckhoff Vietnam
|
C9900-M674
|
Industrial pc C601x without mounting plate, instead of standard
Mounting plate. Less price
|
Beckhoff Vietnam
|
C9900-M675
|
Mounting plate made of black anodized aluminium for mounting the UPS on the control cabinet wall, suitable for CU8110-0120, CU8130-0120 and CU8130-0240
|
Beckhoff Vietnam
|
C9900-M681
|
Preparation for the installation of a second M.2 SSD in a C603x, distance bolt and fastening screw
|
Beckhoff Vietnam
|
C9900-M682
|
Mounting plate for C602x at the side wall, instead of plate at the rear wall
|
Beckhoff Vietnam
|
C9900-M683
|
Mounting plate for the lateral installation of the C602x, separate part, not mounted
|
Beckhoff Vietnam
|
C9900-M684
|
Mounting plate with DIN rail mounting adapter for C602x, instead of standard mounting plate
|
Beckhoff Vietnam
|
C9900-M685
|
Mounting plate with DIN rail mounting adapter for C602x, separate part, not mounted
|
Beckhoff Vietnam
|
C9900-M686
|
Mounting plate for the rear wall installation of the C601x, separate part, not mounted
|
Beckhoff Vietnam
|
C9900-M687
|
Stand for C602x, instead of mounting plate at the rear wall
|
Beckhoff Vietnam
|
C9900-M710
|
installation frame with telescope rails for C33xx to mount the PC
from the front side
|
Beckhoff Vietnam
|
C9900-M711
|
Telescope rails for C51xx
|
Beckhoff Vietnam
|
C9900-M712
|
Telescope rails for C5210. Rails including bracket set for 19 inch
rack assembly
|
Beckhoff Vietnam
|
C9900-M735
|
Flange welded on a 48mm tube (length: 1,50 m, internal diameter 48 mm)
for mounting arm adapter C9900-M759 CP3xxx-14xx.
Stainless steel, matt ground.
|
Beckhoff Vietnam
|
C9900-M736
|
Flange for 48mm tube (must be welded) for mounting arm adapter
C9900-M759 CP3xxx-14xx, stainless steel.
|
Beckhoff Vietnam
|
C9900-M750
|
rotatable and tiltable mounting arm adapter for Control Panel
CP3911 to CP3924 for Rittal and Rolec mounting arm systems with 48 mm
tube from top
|
Beckhoff Vietnam
|
C9900-M751
|
rotatable and tiltable mounting arm adapter for Control Panel
CP3911 to CP3924 for Rittal and Rolec mounting arm systems with 48 mm
tube from bottom
|
Beckhoff Vietnam
|
C9900-M752
|
rotatable and tiltable mounting arm adapter for Control Panel CP3911
to CP3924 with push-button extension C9900-Gxxx for Rittal and Rolec
mounting arm systems with 48 mm tube from top
|
Beckhoff Vietnam
|
C9900-M753
|
rotatable and tiltable mounting arm adapter for Control Panel CP3911
to CP3924 with push-button extension C9900-Gxxx for Rittal and Rolec
mounting arm systems with 48 mm tube from bottom
|
Beckhoff Vietnam
|
C9900-M755
|
rotatable and tiltable mounting arm adapter for
Control Panel CP3911 to CP3924 with push-button extension C9900-Gxxx
for Rittal and Rolec mounting arm systems with 48 mm tube from bottom.
The tilt can be locked with a clamping lever
|
Beckhoff Vietnam
|
C9900-M759
|
Rotatable mounting arm adapter for Control Panel CP3xxx-14xx
Stainless steel, matt ground. Mounting arm installation from top/botto
For mounting is a separate intake necessary:
C9900-M735 Flange with welded tube or
C9900-M736 Flange for 48mm tube (must be welded)
|
Beckhoff Vietnam
|
C9900-M760
|
Rotatable and tiltable mounting arm adapter for customised Multi-touch
Control Panel CP39xx-1xxx, for Rittal and Rolec mounting arm systems
with 48 mm tube, wiring through the mounting arm. For mounting four
M6 tapped holes at a distance of 100 x 100 mm and 70 x 130 mm. The
tilt can be locked with a clamping lever. Turnable by customer.
Not mounted at the factory.
|
Beckhoff Vietnam
|
C9900-M761
|
Rotatable and tiltable mounting arm adapter for Panel PCs CP32xx-16xx,
CP37xx-1xxx, CPX37xx or CP39xx-0010 with Option C9900-M338. Suitable
for Rittal and Rolec mounting arm systems with 48 mm tube, wiring
through the mounting arm. For mounting four M6 tapped holes at a
distance of 100 x 100 mm and 70 x 130 mm. Vertical orientation can be
changed by the customer. The tilt can be locked with a clamping lever.
Not mounted at the factory.
|
Beckhoff Vietnam
|
C9900-M762
|
Rotatable and tiltable mounting arm adapter for customised Multi-touch
Control Panel CP39xx-1xxx, for Rittal and Rolec mounting arm systems
with 48 mm tube, wiring through the mounting arm. For mounting four M6
tapped holes at a distance of 100 x 100 mm and 70 x 130 mm.
Turnable by customer, not mounted at the factory.
|
Beckhoff Vietnam
|
C9900-M763
|
Rotatable and tiltable mounting arm adapter for Panel PCs CP32xx-16xx,
CP37xx-1xxx, CPX37xx or CP39xx-0010 with Option C9900-M338. Suitable
for Rittal and Rolec mounting arm systems with 48 mm tube, wiring
through the mounting arm. For mounting four M6 tapped holes at a
distance of 100 x 100 mm and 70 x 130 mm. Vertical orientation
can be changed by the customer. Not mounted at the factory.
|
Beckhoff Vietnam
|
C9900-M764
|
Two-piece mounting arm adapter plate for Multitouch Control Panel
or Multitouch Panel PC CP3xxx-14xx with mounting arm
adapter C9900-M759, stainless steel 1.4404, brushed grain 240, with
an angle of 10 °, turnable by customer, not mounted at the factory
|
Beckhoff Vietnam
|
C9900-M770
|
Mounting arm adapter with an angle of 15 ° with metal sheet cover
suitable for two Panel PCs CP3xxx-1600 or customized CP39xx with
4 x M6 holes in a distance of 100x100mm or 70 x130mm to mount them
on top of each other.
Mountable with many Rittal- , Rolec- and Rose-mounting arm systems.
Wiring through mounting arm. Single part, not mounted.
|
Beckhoff Vietnam
|
C9900-M898
|
EtherCAT extension module
- aluminium housing, for cabinet assembly
front- and rearside protection class IP 65
- frontfoil in RAL9005 with embossing for all buttons
- 10 short travel buttons with LED(RGBW)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- Emergency stop, 2 x NC,wired on M12 connector
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
1 x M12 for Emergency stop
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M899
|
EtherCAT extension module
- aluminium housing, for cabinet assembly
front side protection class IP 65, rear side protection class IP40
- frontfoil with embossing for all buttons
- 3 short travel buttons with LED(RGBW)-ring illumination
connection via EtherCat
- Emergency stop, 2 x NC, wired on M12 connector
- buttons identified by slide-in labels
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
1 x M12 for Emergency stop
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M900
|
EtherCAT extension module
- aluminum housing, anodized, protection class IP 65
- frontfoil with embossing for all buttons
- E-stop 1 x NO(feedback) via EtherCAT 2 x NC on 4pin M12
- 3 short travel buttons with LED(RGBW)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- connectors
1 x M12 connector for 24V and GND
1 x M12 connector for E-stop
2 x M12 connectors for EtherCAT in / out
- 4 x M6 threaded holes on the backside for mounting
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M905
|
Front plate with "Nagel" design, for the installation under a
CP6932-0002
- with mounted keys
- without cover on the backside
|
Beckhoff Vietnam
|
C9900-M914
|
Push button extension for additional assembly to a CP7032-1071
|
Beckhoff Vietnam
|
C9900-M919
|
Front laminate with 45 buttons and LEDs. Push buttons with slide in
labels.
emergency stop
3 electromechanic buttons
Graycode button T=17
Graycode button T=23
Push buttons and LEDs are transmitted via EtherCAT, BK1120
|
Beckhoff Vietnam
|
C9900-M923
|
Extension module C9900-M923
- aluminium housing, protection class IP 65
- 23 keys identified by slide-in labels
- status indication by red or green ambient illumination of each key
- 5 digital 24V inputs, connection over 12 pin connector in the
backplane
- emergency stop button, two circuits, connection over 12 pin
connector in the backplane
- emergency stop feedback, connection over EtherCAT
- operating temperature 0 to 55 °C
- for mounting 4 front-lateral throughholes Ø 4,2 mm
- Push buttons and LEDs are transmitted via EtherCAT
- without the connectors
|
Beckhoff Vietnam
|
C9900-M931
|
screwed cable gland, designed for feeding the signal line into the
push-button extension without mounting arm connection
|
Beckhoff Vietnam
|
C9900-M938
|
Housing to install electromechanical keys and
switches Design equal to the Control Panel CP7000,
Dimensions (W x H) 404 x 110
|
Beckhoff Vietnam
|
C9900-M941
|
Housing to install electromechanical keys and switches
to be mounted at Control Panel CP7503-1001, including holder with 120°
ancle
|
Beckhoff Vietnam
|
C9900-M949
|
Seal set for C33xx, protection class IP 20
|
Beckhoff Vietnam
|
C9900-M950
|
sound extension for CP62xx for play back a BIOS control signal
|
Beckhoff Vietnam
|
C9900-M956
|
modified front for a CP6203 or CP6903 for direct mounting in a 19 inch
19 inch rack, mounting from front
|
Beckhoff Vietnam
|
C9900-M957
|
ASS CP6903-0001-0010 front, M957
|
Beckhoff Vietnam
|
C9900-M960
|
Customised front-plate for Emergency Stop
- threaded bolts for fixing the front-plate
- mounting hole for Emergency Stop button
- no components assembled
- rear side without cover plate
|
Beckhoff Vietnam
|
C9900-M970
|
|
Beckhoff Vietnam
|
C9900-M971
|
Mounting arm adapter plate for additional assembly on
CP7702-1250-0040, for customised mounting arm system. Mounting arm
from bottom, with adjustable angle of 0° to 30°. Wiring through
the mounting arm
|
Beckhoff Vietnam
|
C9900-M973
|
customised mounting arm adapter for desk- and wall mounting
CP7702-1256 or CP7702-1257
|
Beckhoff Vietnam
|
C9900-M974
|
Extension module C9900-M974
- aluminium housing, for cabinet assembly
front side protection class IP 65
rear side protection class IP20
- frontfoil color, RAL 9006
- 10 short travel buttons with LED(RGB)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- emergency stop button,
2 x NC connection over 4-pin socket
including mating connector
- 1 x NO emergency stop feedback, connection over EtherCAT
- connectors
2 x 24V, 2 x GND, 2 x PE, connection over 6-pin socket
including mating connector
2 x earth, conection over flat connector
- EtherCat in / out, connection over 2 x RJ45
- mounting via 6 pull-out clamping levers
- operating temperature 0 to 55 °C
|
Beckhoff Vietnam
|
C9900-M975
|
Extension module C9900-M975
- aluminium housing, for cabinet assembly
front side protection class IP 65
rear side protection class IP20
- frontfoil color, RAL 9006
- 6 short travel buttons with LED(RGB)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- connectors
2 x 24V, 2 x GND, 2 x PE, connection over 6-pin socket
including mating connector
2 x earth, conection over flat connector
- EtherCat in / out, connection over 2 x RJ45
- mounting via 4 pull-out clamping levers
- operating temperature 0 to 55 °C
|
Beckhoff Vietnam
|
C9900-M978
|
Keyboard extension
- aluminium front with stainless steel sheet rear cover and mounting p
front side IP 65, rear side IP 20
- 10 switch elements, type Siemens Signum square,
30 x 30 mm
- 1 emergency stop key, type Siemens Signum
- Labels for push-button caps allow individual marking.
- without mounting arm connection
- cable gland M25 at the top side, blind plug at the bottom side for c
entry
|
Beckhoff Vietnam
|
C9900-M979
|
Extension module
- aluminium housing, for cabinet assembly
front side protection class IP 65, rear side protection class IP55
- frontfoil with embossing for all buttons
- 10 short travel buttons with LED(RGB)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- connectors
M12 Connector for 24V and GND
2 M12 connectors for EtherCAT in / out
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M982
|
Hood for CP6616-1007
|
Beckhoff Vietnam
|
C9900-M983
|
rotatable mounting arm adapter for CP6616-1007, for Rittal and Rolec
mounting arm system with 48mm tube from top
|
Beckhoff Vietnam
|
C9900-M984
|
Push-button extension for CP3924-1037-0010
- 10 RAFI push buttons ion 2 rows
- 1 graycodeswitch with 16 steps
- 1 graycodeswitch with 32 steps
- 1 encoder with 100 steps
- 1 joystick
connection via USB and 24V at the CP3924-1037-0010
bracket with a fixed 110°
|
Beckhoff Vietnam
|
C9900-M985
|
Connecting kit for C9900-M969 + CP7702-1250 Messer
|
Beckhoff Vietnam
|
C9900-M986
|
customer-specific print of the front and the module brackets
of the C6930-1106-0050, instead of standard print
|
Beckhoff Vietnam
|
C9900-M987
|
EtherCAT Extension module
- aluminium housing, for cabinet assembly
front side protection class IP 65, rear side protection class IP40
- aluminum housing, anodized, protection class IP 65
- Emergency stop, 2 x NC, wired on M12 connector
1 x NO (feedback) over EtherCAT
- 3 illuminated push button, green, red, blue
1 x NO and LED, via EtherCAT
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
1 x M12 for Emergency stop
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M988
|
EtherCAT Extension module for cabinet assembly C9900-M988
- front side aluminum, anodised, protection class IP 65
rear side steel sheet cover, protection class IP20
- mounting via 4 pull-out clamping levers
- operating temperature 0 to 55 °C
- Emergency stop, 2x NC direct wired, 1x NO via EtherCAT
- 2 buttons red and white, controlled via EtherCAT , labelling via
slide-in label
- 1 key switch, Rafi 22 FS, 1+0+2 L90°, connected via EtherCAT,
labelling via slide-in label
- 12 PLC special keys with white LEDs, controlled via EtherCAT,
labelling via slide-in label
- One graycode switch with T=32 positions, controlled via EtherCAT,
labelling via slide-in label
- One joystick, 4 directions, controlled via EtherCAT
- connector , IP20 for power supply and emergency stop
|
Beckhoff Vietnam
|
C9900-M991
|
EtherCAT Extension module for cabinet assembly C9900-M988
- front side aluminum, anodised, protection class IP 65
rear side steel sheet cover, protection class IP20
- mounting via 4 pull-out clamping levers
- operating temperature 0 to 55 °C
- Emergency stop, 2x NC direct wired, 1x NO via EtherCAT
- 2 short stroke buttons, controlled via EtherCAT, labelling via
slide-in label
- 1 key switch, Rafi 22 FS, 1+0+2 L90°, connected via EtherCAT,
labelling via slide-in label
- 12 PLC special keys with white LEDs, controlled via EtherCAT,
labelling via slide-in label
- One graycode switch with T=32 positions, controlled via EtherCAT,
- One joystick, 4 directions, controlled via EtherCAT
- connector 14pole, IP20, for power supply, emergency stop and
key switch
|
Beckhoff Vietnam
|
C9900-M992
|
EtherCAT push-button extension for mounting under the
CP3918-1046-0010:
- 1x Emergency-Stop switch (Rafi Rafix 22FS+)
- 14x push-buttons (Rafi Rafix 22FS+)
- 4x key switches (Siemens Sirius Act), special closing E2 and E22
Push-buttons and key switches are fitted with label holders.
No signs mounted!
- Emergency-Stop and key switches are read in as safe inputs.
(EP1908-002)
- All push-buttons are read in via EtherCAT.
- Euchner EKS R/W IP67 USB, article number: EKS-A-IUX-G01-ST01
|
Beckhoff Vietnam
|
C9900-M993
|
EtherCAT extension module
- aluminium housing, for cabinet assembly
front side protection class IP 65, rear side protection class IP40
- frontfoil with embossing for all buttons
- 8 short travel buttons with LED(RGBW)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- 1 key switch, connection via EtherCat
- Emergency stop, 2 x NC,wired on M12 connector
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
1 x M12 for Emergency stop
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M994
|
EtherCAT extension module
- aluminium housing, for cabinet assembly
front side protection class IP 65, rear side protection class IP40
- frontfoil with embossing for all buttons
- 10 short travel buttons with LED(RGBW)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- Emergency stop, 2 x NC,wired on M12 connector
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
1 x M12 for Emergency stop
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M995
|
EtherCAT extension module
- aluminium housing, for cabinet assembly
front side protection class IP 65, rear side protection class IP40
- frontfoil with embossing for all buttons
- 10 short travel buttons with LED(RGBW)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M996
|
EtherCAT extension module
- aluminium housing, for cabinet assembly
front side protection class IP 65, rear side protection class IP40
- frontfoil with embossing for all buttons
- 6 short travel buttons with LED(RGBW)-ring illumination
connection via EtherCat
- buttons identified by slide-in labels
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M997
|
EtherCAT extension module
- aluminium housing, for cabinet assembly
front side protection class IP 65, rear side protection class IP40
- frontfoil with embossing for all buttons
- 6 short travel buttons with LED(RGBW)-ring illumination
connection via EtherCat
- Emergency stop, 2 x NC, wired on M12 connector
- buttons identified by slide-in labels
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
1 x M12 for Emergency stop
- mounting with fixing brackets
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M998
|
EtherCAT Extension module
- aluminum housing, anodized, protection class IP 65
- Emergency stop, 2 x NC, wired on M12 connector
1 x NO (feedback) over EtherCAT
- 3 illuminated push button, green, red, blue
1 x NO and LED, via EtherCAT
- connectors
1 x M12 Connector for 24V and GND
2 x M12 connectors for EtherCAT in / out
1 x M12 for Emergency stop
- 4 x M6 threaded holes on the backside for mounting
- operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-P208
|
24 V DC power supply, instead of 100 to 240 V AC full range power
supply, occupies one serial port
|
Beckhoff Vietnam
|
C9900-P209
|
24 V DC power supply with integrated UPS, instead of 100 to 240 V AC
full range power supply, occupies one serial port
|
Beckhoff Vietnam
|
C9900-P212
|
MICSY C6220-0000 net traverse 24V (C9900-P212)
|
Beckhoff Vietnam
|
C9900-P222
|
24 V DC power supply 250 W fan less with integrated UPS, instead of
100 to 240 V AC full range power supply
|
Beckhoff Vietnam
|
C9900-P315
|
ATX power supply for C6650, 100-240 V AC, 600 W, instead of standard
power supply, for the installation of plug-in cards with 250 W power
consumption in total. Board holder with openings for the power supply
cables of a graphic card, instead of standard board holder.
Battery of the system time clock mounted at the housing, instead of
mounted on the motherboard. Additional housing fan at the top housing
wall, instead of 3 brackets to lead out serial interfaces.
|
Beckhoff Vietnam
|
C9900-P322
|
Redundant ATX power supply for C510x, 100-240 V, instead of standard
power supply
|
Beckhoff Vietnam
|
C9900-P500
|
customer-specific firmware for the operation of the batterie pack
C9900-U332 with power supply P24V136W
|
Beckhoff Vietnam
|
C9900-P916
|
Power supply connector for Industrial PC C63xx-0000, C32xx, CP39xx,
CP77xx, CP78xx, CP79xx round plug IP65 with strain relief for the
externale power supply cable
|
Beckhoff Vietnam
|
C9900-P933
|
Power supply connector for "Economy" built-in Panel PC CP6608, 5-pin
connector with strain relief for the external power supply cable
|
Beckhoff Vietnam
|
C9900-P934
|
Power signal connector for industrial pc, plug with strain relief
for the external power signal cable, 5 pin plug
|
Beckhoff Vietnam
|
C9900-P936
|
Power signal connector for Control Panel CP6904 and CP6204,
8-pin connector with build-in push buttons, for the external
Power supply cables
|
Beckhoff Vietnam
|
C9900-P937
|
power signal connector für emergeny stop. 4 pin clamp connector
|
Beckhoff Vietnam
|
C9900-P938
|
Signal connector RJ45, IP20, field assembly, for Control Panel
CP29xx-0010. 8-pin connector for the external cables
|
Beckhoff Vietnam
|
C9900-P939
|
Signal connector M12, IP65, field assembly, for Control Panel
CP39xx-0010. 8-pin connector for the external cables
|
Beckhoff Vietnam
|
C9900-P941
|
Signal connector for industrial pc, plug with strain relief for the
external power signal cable, 5 pin plug for signals and UPSout
|
Beckhoff Vietnam
|
C9900-P942
|
CP-Link 4 Adapter M12 x-coded, female/ female
|
Beckhoff Vietnam
|
C9900-P943
|
Power supply connector for Industrial PC C60xx, C6905, CP6700 and CP6706
|
Beckhoff Vietnam
|
C9900-P950
|
Spare connector for the power supply of the CU81xx UPS series. Two 9-pin connectors with push-in connection
for cables with a cross-section of 0.14 mm² to 1.5 mm² or AWG26 to AWG16.
|
Beckhoff Vietnam
|
C9900-R221
|
memory extension to 2 GB DDR2RAM, instead of 512 MB
|
Beckhoff Vietnam
|
C9900-R225
|
memory module DDR2RAM DIMM, 256 MB
|
Beckhoff Vietnam
|
C9900-R230
|
Memory module, NOVRAM for fail-safe storage of process data, 128 kB,
Mini PCI plug-in card
|
Beckhoff Vietnam
|
C9900-R231
|
Memory module, NOVRAM for fail-safe storage of process data, 256 kB,
Mini PCI plug-in card
|
Beckhoff Vietnam
|
C9900-R232
|
Memory module, NOVRAM for fail-safe storage of process data, 512 kB,
Mini PCI plug-in card
|
Beckhoff Vietnam
|
C9900-R233
|
memory module DDR2RAM SO-DIMM, 256 MB
|
Beckhoff Vietnam
|
C9900-R234
|
memory module DDR2RAM SO-DIMM, 512 MB
|
Beckhoff Vietnam
|
C9900-R239
|
memory module DDR2RAM DIMM, 2048 MB
|
Beckhoff Vietnam
|
C9900-R240
|
memory module DDR2RAM SO-DIMM, 2048 MB
|
Beckhoff Vietnam
|
C9900-R244
|
memory extension to 2 GB DDR2RAM, instead of 1 GB
|
Beckhoff Vietnam
|
C9900-R249
|
memory extension to 4 GB DDR3 RAM, instead of 2 GB, requires a 64 bit
operating system or only 3 GB are addressable
|
Beckhoff Vietnam
|
C9900-R250
|
memory extension to 8 GB DDR3 RAM, instead of 2 GB, requires a 64 bit
operating system
|
Beckhoff Vietnam
|
C9900-R251
|
memory extension to 16 GB DDR3 RAM, instead of 2 GB, requires a 64 bit
operating system
|
Beckhoff Vietnam
|
C9900-R257
|
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a 64 bit
operating system or only 3 GB are addressable
|
Beckhoff Vietnam
|
C9900-R258
|
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a 64 bit
operating system
|
Beckhoff Vietnam
|
C9900-R259
|
memory extension to 16 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
|
Beckhoff Vietnam
|
C9900-R260
|
memory extension to 32 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
|
Beckhoff Vietnam
|
C9900-R264
|
memory extension to 128 GB DDR4-RAM ECC, instead of 64 GB
|
Beckhoff Vietnam
|
C9900-R265
|
memory extension to 256 GB DDR4-RAM ECC, instead of 64 GB
|
Beckhoff Vietnam
|
C9900-R266
|
Memory PCIe module for PCs with Beckhoff PCIe module slots, NOVRAM for
fail-safe storage of process data, 512 kB, PCI Express x1 bus
|
Beckhoff Vietnam
|
C9900-R270
|
Memory extension to 8 GB DDR4 RAM, instead of 4 GB
|
Beckhoff Vietnam
|
C9900-R271
|
Memory extension to 16 GB DDR4 RAM, instead of 4 GB
|
Beckhoff Vietnam
|
C9900-R272
|
Memory extension to 32 GB DDR4 RAM, instead of 4 GB
|
Beckhoff Vietnam
|
C9900-R273
|
Memory extension to 64 GB DDR4 RAM, instead of 4 GB
|
Beckhoff Vietnam
|
C9900-R280
|
memory extension to 512 GB DDR4-RAM ECC, instead of 64 GB
|
Beckhoff Vietnam
|
C9900-R281
|
memory extension to 96 GB DDR4-RAM ECC, instead of 64 GB
|
Beckhoff Vietnam
|
C9900-R282
|
memory extension to 192 GB DDR4-RAM ECC, instead of 64 GB
|
Beckhoff Vietnam
|
C9900-R283
|
memory extension to 348 GB DDR4-RAM ECC, instead of 64 GB
|
Beckhoff Vietnam
|
C9900-R285
|
Memory extension to 128 GB DDR4 RAM, instead of 4 GB, for PCs with ATX motherboard and 9th generation Intel® Core™ i5 or Core™ i7
|
Beckhoff Vietnam
|
C9900-S300
|
MS-Windows NT 4.0 german CD-ROM
PC operating system
|
Beckhoff Vietnam
|
C9900-S301
|
MS-Windows NT 4.0 english CD-ROM
PC operating system
|
Beckhoff Vietnam
|
C9900-S317
|
Graphic driver with Open GL support instead of Intel® Embedded
graphic driver
|
Beckhoff Vietnam
|
C9900-S323
|
Microsoft Windows embedded standard 2009 English
|
Beckhoff Vietnam
|
C9900-S325-0031
|
Microsoft-Windows-XP-Embedded-Image, German 256 MB (requires at least
256 MB Compact Flash), instead of Windows CE english
|
Beckhoff Vietnam
|
C9900-S325-0033
|
Microsoft-Windows-XP-Embedded-Image, English 256 MB (requires at least
256 MB Compact Flash), instead of Windows CE english
|
Beckhoff Vietnam
|
C9900-S326-0031
|
Microsoft Windows Embedded Standard 2009 image, German, requires
at least 1 GB Compact Flash, instead of Windows CE english
|
Beckhoff Vietnam
|
C9900-S326-0033
|
Microsoft Windows Embedded Standard 2009 image, English, requires
at least 1 GB Compact Flash, instead of Windows CE english
|
Beckhoff Vietnam
|
C9900-S328
|
Microsoft-Windows-XP-Embedded-Image German 256 MB (requires at least
256 MB Compact Flash), instead of Windows CE english
|
Beckhoff Vietnam
|
C9900-S329
|
Microsoft-Windows-XP-Embedded-Image German 512 MB (requires at least
512 MB Compact Flash), instead of Windows CE english
|
Beckhoff Vietnam
|
C9900-S330
|
Microsoft Windows 2000 Professional, German
|
Beckhoff Vietnam
|
C9900-S331
|
Microsoft Windows 2000 Professional, English
* USA
|
Beckhoff Vietnam
|
C9900-S336-0031
|
Microsoft-Windows-XP-Embedded-Image, German, requires at least
2 GB Compact Flash
|
Beckhoff Vietnam
|
C9900-S336-0033
|
Microsoft-Windows-XP-Embedded-Image, English, requires at least
2 GB Compact Flash
|
Beckhoff Vietnam
|
C9900-S339
|
Microsoft Windows 2000 multilanguage pack installed on a PC,
without CD. Can be ordered together with one PC and and Windows
2000 Professional englisch C9900-S331
|
Beckhoff Vietnam
|
C9900-S345
|
Microsoft® Windows Embedded Standard 2009 for industrial PCs with
Intel® fourth generation Core™ processors, 32 bit, German
he DVI-I connector can't be connected to a VGA adapter.
This version of Windows XP is not working with VGA.
|
Beckhoff Vietnam
|
C9900-S346
|
Microsoft® Windows Embedded Standard 2009 for industrial PCs with
Intel® fourth generation Core™ processors, 32 bit, English
The DVI-I connector can't be connected to a VGA adapter.
This version of Windows XP is not working with VGA.
|
Beckhoff Vietnam
|
C9900-S347
|
Microsoft® Windows Embedded Standard 2009 for industrial PCs with
Intel® fourth generation Core™ processors, 32 bit, multilingual,
English desktop active
The DVI-I connector can't be connected to a VGA adapter.
This version of Windows XP is not working with VGA.
|
Beckhoff Vietnam
|
C9900-S348
|
Microsoft Windows Embedded Compact 7 for 2nd and 3rd generation
Intel® Core™ processors, expected availability until 2018
|
Beckhoff Vietnam
|
C9900-S370
|
Microsoft Windows XP Professional, German, instead of Windows CE
english
|
Beckhoff Vietnam
|
C9900-S371
|
Microsoft Windows XP Professional, English, instead of Windows CE
english
|
Beckhoff Vietnam
|
C9900-S372
|
Microsoft Windows XP Professional, multilanguage, English desktop
active, instead of Windows CE english
|
Beckhoff Vietnam
|
C9900-S373
|
Microsoft-Windows-XP-Embedded-Image, multilanguage (requires a HDD
instead of Compact Flash), instead of Windows CE english
|
Beckhoff Vietnam
|
C9900-S374
|
Microsoft Windows Embedded Standard 2009 image for CP62xx-0010,
German
|
Beckhoff Vietnam
|
C9900-S375
|
Microsoft Windows Embedded Standard 2009 image for CP62xx-0010,
English
|
Beckhoff Vietnam
|
C9900-S376
|
Microsoft Windows Embedded Standard 2009 image for CP72xx-0010,
German
|
Beckhoff Vietnam
|
C9900-S377
|
Microsoft Windows Embedded Standard 2009 image for CP72xx-0010,
English
|
Beckhoff Vietnam
|
C9900-S378
|
Microsoft Windows Embedded Standard 2009 image for C6920-0010 and
C6930-0010, German
|
Beckhoff Vietnam
|
C9900-S379
|
Microsoft Windows Embedded Standard 2009 image for C6920-0010 and
C6930-0010, English
|
Beckhoff Vietnam
|
C9900-S382
|
Microsoft Windows Embedded Standard 2009 image for C6525-0010, German
|
Beckhoff Vietnam
|
C9900-S383
|
Microsoft Windows Embedded Standard 2009 image for C6525-0010, English
|
Beckhoff Vietnam
|
C9900-S384
|
Microsoft Windows Embedded Standard 2009 image for C6515-0010, German
|
Beckhoff Vietnam
|
C9900-S385
|
Microsoft Windows Embedded Standard 2009 image for C6515-0010, English
|
Beckhoff Vietnam
|
C9900-S389
|
Microsoft Windows Embedded Standard 2009 image 32 bit for CP62xx-0030,
German
|
Beckhoff Vietnam
|
C9900-S391
|
Microsoft Windows Embedded Standard 2009 image 32 bit for CP72xx-0020,
German
|
Beckhoff Vietnam
|
C9900-S392
|
Microsoft Windows Embedded Standard 2009 image 32 bit for CP72xx-0020,
English
|
Beckhoff Vietnam
|
C9900-S393
|
Microsoft Windows Embedded Standard 2009 image 32 bit for C6920-0020
and C6930-0020, German
|
Beckhoff Vietnam
|
C9900-S394
|
Microsoft Windows Embedded Standard 2009 image 32 bit for C6920-0020
and C6930-0020, English
|
Beckhoff Vietnam
|
C9900-S395
|
Microsoft Windows Embedded Standard 2009 image 32 bit for C6525-0020,
German
|
Beckhoff Vietnam
|
C9900-S396
|
Microsoft Windows Embedded Standard 2009 image 32 bit for C6525-0020,
English
|
Beckhoff Vietnam
|
C9900-S398
|
Microsoft Windows Embedded Standard 2009 image 32 bit for C6515-0020,
English
|
Beckhoff Vietnam
|
C9900-S405
|
Delivery without Windows CE - no discount
|
Beckhoff Vietnam
|
C9900-S417
|
Microsoft Windows Embedded Standard 7, single-language, English,
single finger touch screen support, not available for PCs with
4th Generation Intel© Core™ i processor and Intel® Atom™ E38xx
|
Beckhoff Vietnam
|
C9900-S440
|
Microsoft Windows 7 Professional 32 bit, German
|
Beckhoff Vietnam
|
C9900-S441
|
Microsoft Windows 7 Professional 32 bit, English
|
Beckhoff Vietnam
|
C9900-S442
|
Microsoft Windows 7 Professional 64 bit, German
|
Beckhoff Vietnam
|
C9900-S443
|
Microsoft Windows 7 Professional 64 bit, English
|
Beckhoff Vietnam
|
C9900-S444
|
Microsoft Windows 7 Ultimate 32 bit, multilanguage, English
desktop active, further languages configurable
|
Beckhoff Vietnam
|
C9900-S445
|
Microsoft Windows 7 Ultimate 64 bit, multilanguage, English
desktop active, further languages configurable.
|
Beckhoff Vietnam
|
C9900-S447
|
Microsoft Windows 7 Professional 32 bit, English, instead of
Windows CE. Only for devices with Intel® Atom™ processor.
|
Beckhoff Vietnam
|
C9900-S449
|
Microsoft Windows 7 Ultimate 32 bit, German and English, English
desktop active, further languages can be installed
|
Beckhoff Vietnam
|
C9900-S450
|
Microsoft Windows 7 Ultimate 64 bit, German and English, English
desktop active, further languages can be installed
|
Beckhoff Vietnam
|
C9900-S453
|
Microsoft Windows 7 Professional 32 Bit, simplified chinese
|
Beckhoff Vietnam
|
C9900-S458
|
Microsoft Windows Server 2012 R2, 64 Bit, 5 clients, german
|
Beckhoff Vietnam
|
C9900-S459
|
Microsoft Windows Server 2012 R2, 64 Bit, 5 clients, english
|
Beckhoff Vietnam
|
C9900-S460
|
License for 5 additional Microsoft Windows Server 2012 R2 clients,
USER CAL
|
Beckhoff Vietnam
|
C9900-S461
|
License for 5 additional Microsoft Windows Server 2012 R2 clients,
DEVICE CAL
|
Beckhoff Vietnam
|
C9900-S462
|
Microsoft Windows Server 2012 Remote Desktop Services, 1 USER CAL
|
Beckhoff Vietnam
|
C9900-S463
|
wMicrosoft Windows Server 2012 Remote Desktop Services, 1 DEVICE CAL
|
Beckhoff Vietnam
|
C9900-S464
|
Microsoft Windows Server 2016 for Embedded Systems Standard,
16 cores, 5 clients, german, for industrial PCs with Intel® Core™ i
of the 7th generation, Intel® Xeon® Silver 41xx and Intel® Xeon® Gold 61xx
|
Beckhoff Vietnam
|
C9900-S465
|
Microsoft Windows Server 2016 for Embedded Systems Standard,
additional license for 4 cores, can only be ordered together with a
Microsoft Windows Server 2016 license
|
Beckhoff Vietnam
|
C9900-S466
|
Microsoft Windows Server 2016 for Embedded Systems Client Access
License, 1 user
|
Beckhoff Vietnam
|
C9900-S467
|
Microsoft Windows Server 2016 for Embedded Systems Client Access
License, 1 device
|
Beckhoff Vietnam
|
C9900-S468
|
Microsoft Windows Server 2016 Remote Desktop Services, Client Access
License for Embedded Systems, 1 user
|
Beckhoff Vietnam
|
C9900-S469
|
Microsoft Windows Server 2016 for Embedded Systems Standard,
16 cores, 5 clients, englisch, for industrial PCs with Intel® Core™ i
of the 7th generation, Intel® Xeon® Silver 41xx and Intel® Xeon® Gold 61xx
|
Beckhoff Vietnam
|
C9900-S470
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 32 bit, German,
for industrial PCs with Intel® Atom™ E38xx
|
Beckhoff Vietnam
|
C9900-S471
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 32 bit, English,
for industrial PCs with Intel® Atom™ E38xx
|
Beckhoff Vietnam
|
C9900-S472
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 32 bit, German,
for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or
Core™ i5 of the 4th and 6th generation
|
Beckhoff Vietnam
|
C9900-S473
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 32 bit, English,
for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or
Core™ i5 of the 4th and 6th generation
|
Beckhoff Vietnam
|
C9900-S474
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 32 bit, German,
for industrial PCs with Intel® Core™ i7 of the 4th and 6th generation
|
Beckhoff Vietnam
|
C9900-S475
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 32 bit, English,
for industrial PCs with Intel® Core™ i7 of the 4th and 6th generation
|
Beckhoff Vietnam
|
C9900-S476
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, German,
for industrial PCs with Intel® Atom™ E38xx
|
Beckhoff Vietnam
|
C9900-S477
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, English,
for industrial PCs with Intel® Atom™ E38xx
|
Beckhoff Vietnam
|
C9900-S478
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, German,
for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or
Core™ i5 of the 4th, 6th and 7th generation
|
Beckhoff Vietnam
|
C9900-S479
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, English,
for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or
Core™ i5 of the 4th, 6th and 7th generation
|
Beckhoff Vietnam
|
C9900-S480
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, German,
for industrial PCs with Intel® Core™ i7 of the 4th, 6th and 7th generation or Xeon®
|
Beckhoff Vietnam
|
C9900-S481
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, English, for industrial PCs with Intel® Core™ i7 of the 4th, 6th and 7th generation or Xeon®
|
Beckhoff Vietnam
|
C9900-S484
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 32 bit, German, for
industrial PCs with Intel® Atom™ E38xx
|
Beckhoff Vietnam
|
C9900-S485
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 32 bit, English, for industrial PCs with Intel® Atom™ E38xx
|
Beckhoff Vietnam
|
C9900-S486
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 32 bit, German, for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or Core™ i5 of the 6th generation
|
Beckhoff Vietnam
|
C9900-S487
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 32 bit, English, for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or Core™ i5 of the 6th generation
|
Beckhoff Vietnam
|
C9900-S488
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 32 bit, German, for industrial PCs with Intel® Core™ i7 of the 6th generation
|
Beckhoff Vietnam
|
C9900-S489
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 32 bit, English, for industrial PCs with Intel® Core™ i7 of the 6th generation
|
Beckhoff Vietnam
|
C9900-S490
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, German, for industrial PCs with Intel® Atom™ E38xx and Intel® Atom™ x5-E39xx
|
Beckhoff Vietnam
|
C9900-S491
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, English, for industrial PCs with Intel® Atom™ E38xx and Intel® Atom™ x5-E39xx
|
Beckhoff Vietnam
|
C9900-S492
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, German, for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or Core™ i5 from the 6th generation onward
|
Beckhoff Vietnam
|
C9900-S493
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, English, for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or Core™ i5 from the 6th generation onward
|
Beckhoff Vietnam
|
C9900-S494
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, German, for industrial PCs with Intel® Core™ i7 from the 6th generation onward or Xeon®
|
Beckhoff Vietnam
|
C9900-S495
|
Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, English, for industrial PCs with Intel® Core™ i7 from the 6th generation onward or Xeon®
|
Beckhoff Vietnam
|
C9900-S498
|
Microsoft Windows Server 2019 Standard for Embedded Systems,
16 cores, 5 clients, german, for industrial PCs with
Intel® Core™ i of the 9th generation
|
Beckhoff Vietnam
|
C9900-S499
|
Microsoft Windows Server 2019 Standard for Embedded Systems,
16 cores, 5 clients, english, for industrial PCs with
Intel® Core™ i of the 9th generation
|
Beckhoff Vietnam
|
C9900-S502
|
Microsoft Windows Server 2019 Standard for Embedded Systems,
additional license for 4 cores, can only be ordered together with a
Microsoft Windows Server 2019 license
|
Beckhoff Vietnam
|
C9900-S503
|
Microsoft Windows Server 2019 for Embedded Systems,
Client Access license, 1 user
|
Beckhoff Vietnam
|
C9900-S504
|
Microsoft Windows Server 2019 for Embedded Systems,
Client Access license, 1 device
|
Beckhoff Vietnam
|
C9900-S505
|
Microsoft Windows Server 2019 for Embedded Systems,
Remote Desktop Services, Client Access license, 1 user
|
Beckhoff Vietnam
|
C9900-S506
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 32 bit, English,
German, for industrial PCs with Intel® Celeron®, Core™ I processors
of the 2nd and 3rd generation, English desktop active,
further languages can be installed
|
Beckhoff Vietnam
|
C9900-S507
|
Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, English,
German, for industrial PCs with Intel® Celeron®, Core™ I processors
of the 2nd and 3rd generation, English desktop active,
further languages can be installed
|
Beckhoff Vietnam
|
C9900-S711
|
Microsoft SQL Server, Standard Edition Runtime 2012 for Embedded
Systems ESD OLC1 Clt Std (MS PN E65-00228)
|
Beckhoff Vietnam
|
C9900-S813
|
Symantec PC Anywhere, base version (host and remote),
English
|
Beckhoff Vietnam
|
C9900-S814
|
Symantec PC Anywhere, host version, German
|
Beckhoff Vietnam
|
C9900-S815
|
Symantec PC Anywhere, host version, English
|
Beckhoff Vietnam
|
C9900-S883
|
Acronis Backup & Recovery Workstation 11.7, English for Windows XP, Windows 7,
Windows 10 and Windows Embedded Standard, can be ordered only together with PC. Suitable for 64-Bit-PCs (= PCs with DDR3-RAM), also with 32-Bit-Windows
|
Beckhoff Vietnam
|
C9900-S900
|
CP-Link interface card CP9035 with DDC file for 50 MHz pixelclock
instead of DDC file for 60 MHz pixelclock. Only available together
with a CP-Link interface card CP9035 for 15 inch LCD
|
Beckhoff Vietnam
|
C9900-S901
|
CP-Link interface card CP9035 with DDC file for 40 MHz pixelclock
instead of DDC file for 60 MHz pixelclock. Only available together
with a CP-Link interface card CP9035 for 15 inch LCD
|
Beckhoff Vietnam
|
C9900-S903
|
EtherCAT driver for all LAN ports preinstalled.
Can be ordered in conjunction with a Windows Embedded Standard 7,
Windows 7 Professional, Windows 7 Ultimate or Windows 10 IoT Enterprise. Requires the installation of TwinCAT
|
Beckhoff Vietnam
|
C9900-T103
|
PC mouse Logitech, PS/2 connector, optical
|
Beckhoff Vietnam
|
C9900-T105
|
PC mouse, 2 keys, USB connector
|
Beckhoff Vietnam
|
C9900-T202
|
Adhesive protection film for Control Panels and PCs with 10" display,
plastic foil for gluing onto the glass screen or the touch screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T216
|
Adhesive protection film for Control Panel CP6931-1002-C2 and
CP7931-1103-C2, plastic foil for gluing onto the glass screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T217
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 7" display, plastic foil for gluing onto the touch screen,
foil mounted ex factory
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T218
|
protection film for 12” 4:3 display, foil mounted ex factory
|
Beckhoff Vietnam
|
C9900-T219
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 15.1" display, plastic foil for gluing onto the touch screen,
foil mounted ex factory
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T220
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 15.6" display, plastic foil for gluing onto the touch screen,
foil mounted ex factory
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T221
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 18.5" display, plastic foil for gluing onto the touch screen,
foil mounted ex factory
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T222
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 19" display, plastic foil for gluing onto the touch screen,
foil mounted ex factory
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T223
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 21.5" display, plastic foil for gluing onto the touch screen,
foil mounted ex factory
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T224
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 24" display, plastic foil for gluing onto the touch screen,
foil mounted ex factory
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T225
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 7" display, plastic foil for gluing onto the touch screen
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T226
|
protection film for 12” 4:3 display
|
Beckhoff Vietnam
|
C9900-T227
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 15.1" display, plastic foil for gluing onto the touch screen
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T228
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 15.6" display, plastic foil for gluing onto the touch screen
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T229
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 18.5" display, plastic foil for gluing onto the touch screen
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T230
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 19" display, plastic foil for gluing onto the touch screen
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T231
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 21.5" display, plastic foil for gluing onto the touch screen
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T232
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 24" display, plastic foil for gluing onto the touch screen
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T233
|
protection film for Extension module C9900-M911 and C9900-M923,
plastic foil for gluing, 10 pieces
|
Beckhoff Vietnam
|
C9900-T234
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 11,6" display, plastic foil for gluing onto the touch screen,
foil mounted ex factory
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T235
|
Adhesive protection film for Multi Touch Control Panels and Panel PCs
with 11,6" display, plastic foil for gluing onto the touch screen
A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
C9900-T237
|
protection film for 12.1" 16:9 display, foil mounted ex factory
|
Beckhoff Vietnam
|
C9900-T238
|
protection film for 12.1" 16:9 display
|
Beckhoff Vietnam
|
C9900-T297
|
Transport protection film for Multi Touch Control Panels and
Panel PCs with 21.5” display, foil mounted ex factory
|
Beckhoff Vietnam
|
C9900-T298
|
Transport protection film for Multi Touch Control Panels and
Panel PCs with 18.5” display, foil mounted ex factory
|
Beckhoff Vietnam
|
C9900-T299
|
Transport protection film for Multi Touch Control Panels and Panel PCs
with 19” display, foil mounted ex factory
|
Beckhoff Vietnam
|
C9900-T304
|
touch screen, 12-inch, with controller on the keyboard controller
circuit board, not available with touch pad
|
Beckhoff Vietnam
|
C9900-T306
|
touch screen, with separate controller circuit board, 12 inch
|
Beckhoff Vietnam
|
C9900-T308
|
touch screen, 15-inch, with controller on the keyboard controller
circuit board, not available with touch pad
|
Beckhoff Vietnam
|
C9900-T310
|
MICSY C3640-0001 front Ts (-T310)
|
Beckhoff Vietnam
|
C9900-T327
|
18.5 inch display with Full HD resolution 1920 x 1080,
instead of Standard resolution 1366 x 768
|
Beckhoff Vietnam
|
C9900-T335
|
15.6 inch display with Full HD resolution 1920 x 1080,
instead of Standard resolution 1366 x 768
Singular production, further products not possible
|
Beckhoff Vietnam
|
C9900-T400
|
Touch pad, occupies one USB port, not available with touch
screen
|
Beckhoff Vietnam
|
C9900-T900
|
Touch screen pen with holder for CP7xxx
|
Beckhoff Vietnam
|
C9900-T902
|
touch screen pen with wall holder for CP6xxx, C33xx and C36xx
|
Beckhoff Vietnam
|
C9900-T903
|
Shockwatch 25G mounted at the device
|
Beckhoff Vietnam
|
C9900-T905
|
Shockwatch sticker 50G mounted at the device
|
Beckhoff Vietnam
|
C9900-T906
|
Shockwatch sticker 50G mounted at the package
|
Beckhoff Vietnam
|
C9900-U015
|
Replacement battery pack, 15 Wh, suitable for CU8130-0120
|
Beckhoff Vietnam
|
C9900-U030
|
Replacement battery pack, 30 Wh, suitable for CU8130-0240
|
Beckhoff Vietnam
|
C9900-U120
|
uninterruptible power supply UPS, external, 230V
|
Beckhoff Vietnam
|
C9900-U122
|
uninterruptible power supply UPS, external, 115V
|
Beckhoff Vietnam
|
C9900-U123
|
uninterruptible power supply UPS, external, 230V, mounted in
wall mounting frame C9900-M623
|
Beckhoff Vietnam
|
C9900-U124
|
uninterruptible power supply UPS for industrial pc C6670,
external, 230V, serial interface RS232
|
Beckhoff Vietnam
|
C9900-U209
|
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
|
Beckhoff Vietnam
|
C9900-U211
|
Internal, capacitive 1-second UPS to ensure secure backup of
persistent application data on the Compact Flash card, hard disk or
SSD, requires TwinCAT and Windows Embedded Standard 2009 with Enhanced
Write Filter or Windows CE.
|
Beckhoff Vietnam
|
C9900-U212
|
Internal, capacitive 1-second UPS to ensure secure backup of
persistent application data on the flash card, requires TwinCAT and
Windows Embedded Compact 7
|
Beckhoff Vietnam
|
C9900-U213
|
Internal, capacitive 1-second UPS to ensure secure backup of
persistent application data on the MicroSD flash card and 128 kbyt
NOVRAM for fail-safe storage of TwinCAT process data, requires
TwinCAT and Windows Embedded Compact 7
|
Beckhoff Vietnam
|
C9900-U214
|
Internal, capacitive 1-second UPS to ensure secure backup of
persistent application data on the flash card, requires TwinCAT and
Windows Embedded Compact 7, Windows Embedded Standard 7
or Windows 10 IoT Enterprise
|
Beckhoff Vietnam
|
C9900-U215
|
Internal, capacitive 1-second UPS to ensure secure backup of
persistent application data on the M.2 SSD, requires TwinCAT and
Windows Embedded Compact 7, Windows Embedded Standard 7
or Windows 10 IoT Enterprise
|
Beckhoff Vietnam
|
C9900-U330
|
battery pack for PCs with 24 V power supply and intergrated UPS
C9900-P209 or C9900-U209, external, for DIN rail mounting, 3.4 Ah,
operating temperature 0° to 50°C
|
Beckhoff Vietnam
|
C9900-U330-1001
|
battery pack for PCs with 24 V power supply and intergrated UPS
C9900-P209 or C9900-U209, external, for DIN rail mounting, 3.4 Ah,
operating temperature 0° to 50°C, label in turkish language
|
Beckhoff Vietnam
|
C9900-U332-0010
|
battery pack for 24 V power supply with intergrated UPS C9900-U209 at
PCs with Intel® Celeron® ULV 827E or Intel® Atom™ processor, external,
for DIN rail mounting, 1.3 Ah, operating temperature 0° to 50°C,
vertical and horizontal mounting alignment
|
Beckhoff Vietnam
|
C9900-U332-1001
|
customer specific battery pack Multivac for 24 V power supply with
intergrated UPS C9900-U209 at PCs with Intel® Celeron® ULV 827E
or Intel® Atom™ processor, external, for DIN rail mounting, 1.3 Ah,
operating temperature of the batteries inside the battery pack
housing 0° to 50°C, without type label
|
Beckhoff Vietnam
|
C9900-U334
|
Internal, capacitive 1-second UPS to ensure secure backup of persistent application data on the M.2 SSD, requires TwinCAT and Windows 10 IoT Enterprise
|
Beckhoff Vietnam
|
C9900-Y100
|
slot configuration for ATX Motherboard:
Slot 1: empty
Slot 2: empty
Slot 3: C9900-A716
Slot 4: empty
Slot 5: FC9011
Slot 6: empty
Slot 7: ADD card, COM 2
|
Beckhoff Vietnam
|
C9900-Y101
|
slot configuration for ATX Motherboard:
Slot 1: C9900-E166, COM3 & 4
Slot 2: C9900-A444 + C9900-A472
Slot 3: C9900-A716
Slot 4: empty
Slot 5: FC9011
Slot 6: CP9035-K010
Slot 7: ADD-Karte, COM2
|
Beckhoff Vietnam
|
C9900-Y102
|
slot configuration for ATX Motherboard:
Slot·1:·C9900-E166·COM3,·COM4·RS232
Slot·2:·empty
Slot·3:·empty
Slot·4:·empty
Slot·5:·FC9011 Gigabit Ethernet
Slot·6:·CP9035-K010 CP-Link Karte
Slot·7:·C9900-A160 ADD-Karte, COM2
|
Beckhoff Vietnam
|
C9900-Y103
|
slot configuration for ATX Motherboard:
Slot 1: empty
Slot 2: empty
Slot 3: CP-Link CP9035-K010
Slot 4: C9900-A472 RS232
Slot 5: C9900-A444 2x C9900-A470 Basiskarte 2x RS485
Slot 6: empty
Slot 7: C9900-A160
|
Beckhoff Vietnam
|
C9900-Y105
|
slot configuration for ATX Motherboard:
Slot 1: empty
Slot 2: empty
Slot 3: empty
Slot 4: empty
Slot 5: FC9011
Slot 6: empty
Slot 7: ADD card
|
Beckhoff Vietnam
|
C9900-Y106
|
slot configuration for ATX Motherboard:
Slot 1: empty
Slot 2: empty
Slot 3: CP9035-J010
Slot 4: COM4
Slot 5: empty
Slot 6: empty
Slot 7: ADD-Karte internal DVI
|
Beckhoff Vietnam
|
C9900-Y107
|
C9900-Y107
|
Beckhoff Vietnam
|
C9900-Y127
|
slot configuration for ATX Motherboard:
Slot 1: empty
Slot 2: empty
Slot 3: 2x USB C9900-E195
Slot 4: 2x USB C9900-E195
Slot 5: empty
Slot 6: empty
Slot 7: empty
|
Beckhoff Vietnam
|
C9900-Z113
|
PC standard keyboard, German Layout, USB connector
|
Beckhoff Vietnam
|
C9900-Z114
|
PC standard keyboard, US layout, USB connector
|
Beckhoff Vietnam
|
C9900-Z128
|
PC standard keyboard Cherry G83-6105, german - cyrillic,
USB connector
|
Beckhoff Vietnam
|
C9900-Z150
|
German layout for keyboard K7000 or KT7000 instead of
US-layout
|
Beckhoff Vietnam
|
C9900-Z222
|
Key set for key switch system Rafi (Rafix 22FS) and Idec (AS6M),
2 keys Rafix 22FS
2 keys Idec AS6M
|
Beckhoff Vietnam
|
C9900-Z245
|
Indicator light for push-button extension allows individual assembly
- type Siemens Signum square, 30 x 30 mm
- without push-button cap
|
Beckhoff Vietnam
|
C9900-Z247
|
Conversion-kit to replace 2x Phönix RJ45 connector with 2x Harting
PushPull verticaly arranged for CP7702-1154
|
Beckhoff Vietnam
|
C9900-Z255
|
Colored lens for exchange/retrofitting
type RAFI RAFIX FS+ Flexlab, color: blue
delivery volume: 5 pieces
|
Beckhoff Vietnam
|
C9900-Z256
|
Colored lens for exchange/retrofitting
type RAFI RAFIX FS+ Flexlab, color: yellow
delivery volume: 5 pieces
|
Beckhoff Vietnam
|
C9900-Z257
|
Colored lens for exchange/retrofitting
type RAFI RAFIX FS+ Flexlab, color: green
delivery volume: 5 pieces
|
Beckhoff Vietnam
|
C9900-Z258
|
Colored lens for exchange/retrofitting
type RAFI RAFIX FS+ Flexlab, color: red
delivery volume: 5 pieces
|
Beckhoff Vietnam
|
C9900-Z259
|
Colored lens for exchange/retrofitting
type RAFI RAFIX FS+ Flexlab, color: transparent
delivery volume: 5 pieces
|
Beckhoff Vietnam
|
C9900-Z260
|
Transparent labels for push-button extension C9900-G0xx allow
individual marking
- type Rafi FS+, bore: 22,3 mm
- 1 sheet DIN A4, 54 pieces
|
Beckhoff Vietnam
|
C9900-Z261
|
Label for emergency stop, type Rafi Fs+, yellow (RAL1003), d=45,0 mm
|
Beckhoff Vietnam
|
C9900-Z264
|
RFID Multi reader for Legic or Mifare transponder inside the front of
customised Control Panel or Panel-PC for subsequent installation.
Only the reader is part of the supply!
Cable and mounting adapter are integrated in the customised Control
Panel or Panel-PC
|
Beckhoff Vietnam
|
C9900-Z266
|
1 port USB socket inside the front of a customised push-button
extension for multi-touch Control Panels with mounting hole RAFI
RAFIX 22FS+. With screw-on cap IP 65.
Cable must be installed in the Control Panel!
|
Beckhoff Vietnam
|
C9900-Z267
|
C9900-Z267 transport locking device CFast-slot CP62
|
Beckhoff Vietnam
|
C9900-Z275
|
Key switch set for retrofitting on CP3921-1018-0010
Consisting of: 3x key switch RAFIX 22 FS+, latching, 90° form L,
key removable in position 0, with special closing 002/003/004
|
Beckhoff Vietnam
|
C9900-Z285
|
Piezo Button, stainless steel, laser engraving "I" for
CP39xx-1415-0010
- 1x NO contact, 24V
- with RGB LED
- Connection 2 x 3 pin, Molex
- Baran
|
Beckhoff Vietnam
|
C9900-Z287
|
Piezo Button, stainless steel, without laser engraving for
CP39xx-1415-0010
- 1x NO contact, 24V
- with RGB LED
- Connection 1 x 6 pin, Molex
- Baran
|
Beckhoff Vietnam
|
C9900-Z290
|
Colored lens for exchange/retrofitting
type RAFI RAFIX FS+ Flexlab, color: orange
delivery volume: 5 pieces
|
Beckhoff Vietnam
|
C9900-Z291
|
Key switch set for retrofitting on CP3921-1091-0010
Consisting of: 3x key switch RAFIX 22 FS+ Compact, latching, 90° formL
key removable in position 0, with special closing 002/003/004
|
Beckhoff Vietnam
|
C9900-Z304
|
Seal-label for sealing sensitive hardware units. Measures 70 x 20cm.
Seal will be destroyed in case of removing.
|
Beckhoff Vietnam
|
C9900-Z305
|
HDD conversion kit 2.5 inch, Raid for C6240
|
Beckhoff Vietnam
|
C9900-Z309
|
Retrofit kit for retrofitting a UPS output into a C6240. 5-pin
connector inside a slot bracket
|
Beckhoff Vietnam
|
C9900-Z311
|
Sample case C6920/CP6901
|
Beckhoff Vietnam
|
C9900-Z316
|
Panel PC / IPC / Panel for exhibition requirement:
adapt type label to maximum configuration
without accessory kit, without CD's, Panel PC and IPC including
exhibition image, (only with separate order of an OS)
incl. C9900-U209 in case of 24 V device
|
Beckhoff Vietnam
|
C9900-Z317
|
Panel Presenter for 6.5 up to 24 inch Panel PC and Panel
Delivery unassembled
|
Beckhoff Vietnam
|
C9900-Z318
|
Functional Multitouch Demo Kit 24"
Consisting of:
- CP3924-0000
- C6930-0040 with options:
- C9900-C542 2,5GHz CPU
- C9900-R249 4GB DDR3-RAM
- C9900-S441 Windows 7 Pro 32Bit, english
- C9900-Z316
- 110-240V - 24V, 10A Power supply with connectors
- C9900-K434 Connecting kit 3m
- C9900-Z317 Panel presenter
- Multitouch Software Demo
|
Beckhoff Vietnam
|
C9900-Z319
|
Functional Multitouch Demo Kit 19"
Consisting of:
- CP3919-0000
- C6930-0040 with options:
- C9900-C542 2,5GHz CPU
- C9900-R249 4GB DDR3-RAM
- C9900-S441 Windows 7 Pro 32Bit, english
- C9900-Z316
- 110-240V - 24V, 10A Power supply with connectors
- C9900-K434 Connecting kit 3m
- C9900-Z317 Panel presenter
- Multitouch Software Demo
|
Beckhoff Vietnam
|
C9900-Z320
|
Functional Multitouch Demo Kit 18.5"
Consisting of:
- CP3918-0000
- C6930-0040 with options:
- C9900-C542 2,5GHz CPU
- C9900-R249 4GB DDR3-RAM
- C9900-S441 Windows 7 Pro 32Bit, english
- C9900-Z316
- 110-240V - 24V, 10A Power supply with connectors
- C9900-K434 Connecting kit 3m
- C9900-Z317 Panel presenter
- Multitouch Software Demo
|
Beckhoff Vietnam
|
C9900-Z321
|
Functional Multitouch Demo Kit 15.6"
Consisting of:
- CP3916-0000
- C6930-0040 with options:
- C9900-C542 2,5GHz CPU
- C9900-R249 4GB DDR3-RAM
- C9900-S441 Windows 7 Pro 32Bit, english
- C9900-Z316
- 110-240V - 24V, 10A Power supply with connectors
- C9900-K434 Connecting kit 3m
- C9900-Z317 Panel presenter
- Multitouch Software Demo
|
Beckhoff Vietnam
|
C9900-Z322
|
Functional Multitouch Demo Kit 15"
Consisting of:
- CP3915-0000
- C6930-0040 with options:
- C9900-C542 2,5GHz CPU
- C9900-R249 4GB DDR3-RAM
- C9900-S441 Windows 7 Pro 32Bit, english
- C9900-Z316
- 110-240V - 24V, 10A Power supply with connectors
- C9900-K434 Connecting kit 3m
- C9900-Z317 Panel presenter
- Multitouch Software Demo
|
Beckhoff Vietnam
|
C9900-Z324
|
Flexible and foldable presenter for Control Panel and Panel-PCs
|
Beckhoff Vietnam
|
C9900-Z328
|
Neutral packaging of the industrial pc, instead of standard packaging
|
Beckhoff Vietnam
|
C9900-Z360
|
Key switch for exchange/retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780001
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z361
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780002
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z362
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780003
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z363
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 2 x 90°, key
removable in position 1+0+2, lock type PG780004
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z364
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780004
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z366
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780005
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z367
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780006
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z368
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780007
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z369
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780008
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z370
|
Key switch for retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 1 x 90°, form V
key removable in position 0+1, lock type PG780009
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z371
|
Key switch for retrofitting
key switch RAFI RAFIX 30 FS+, latching, 2-positions, 90° formV
key removable in position 0+1, with closing 010
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z372
|
Key switch for exchange/retrofitting
type RAFI RAFIX 30 FS+, latching, rotating angle 2 x 90°, key
removable in position 1+0+2, lock type PG780001
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z373
|
Emergency Stop for exchange/retrofitting
type RAFI RAFIX 22 FS+, reset by rotation
for 3 redundant normally-closed contacts and 1 additional
signal contact
|
Beckhoff Vietnam
|
C9900-Z374
|
Push-button for exchange/retrofitting
type RAFI RAFIX 30FS+, momentary, illuminable
colored lens is not included in delivery
|
Beckhoff Vietnam
|
C9900-Z375
|
Key switch for exchange/retrofitting
type RAFI RAFIX 22 FS+ compact, latching, rotating angle 2 x 90°
key removable in position 1+0+2, lock type PG780001
2 keys included in delivery
|
Beckhoff Vietnam
|
C9900-Z376
|
Push-button for exchange/retrofitting
type RAFI RAFIX 22FS+, Flexlab, momentary
illuminable, color: red
|
Beckhoff Vietnam
|
C9900-Z377
|
Push-button for exchange/retrofitting
type RAFI RAFIX 22FS+, Flexlab, momentary
illuminable, color: green
|
Beckhoff Vietnam
|
C9900-Z378
|
Push-button for exchange/retrofitting
type RAFI RAFIX 22FS+, Flexlab, momentary
illuminable, color: blue
|
Beckhoff Vietnam
|
C9900-Z379
|
Push-button for exchange/retrofitting
type RAFI RAFIX 22FS+, Flexlab, momentary
illuminable, color: transparent
|
Beckhoff Vietnam
|
C9900-Z380
|
Selector switch for exchange/retrofitting
type RAFI RAFIX 22 FS+, momentary, rotating angle 2 x 40°
illuminable
|
Beckhoff Vietnam
|
C9900-Z380
|
Selector switch for exchange/retrofitting
type RAFI RAFIX 22 FS+, latching, rotating angle 1 x 90°, form V
illuminable
|
Beckhoff Vietnam
|
C9900-Z383 Haltebügel für CAT-Kabel bei Einsatz eines CP-Link4-Moduls im C6930, incl. Befestigungsmaterial
|
Retaining bracket for CAT cable when using a CP-Link4 module in the
C6930, incl. mouting material
|
Beckhoff Vietnam
|
C9900-Z408
|
Label of C6920 and C6930 with customer-specific printing co. KUKA
|
Beckhoff Vietnam
|
C9900-Z411
|
Adapter plug DVI-I to VGA
|
Beckhoff Vietnam
|
C9900-Z412
|
Adapter cable DVI-I to VGA 15 cm
|
Beckhoff Vietnam
|
C9900-Z413
|
Adapter cable DVI-I to DVI and VGA 15 cm
|
Beckhoff Vietnam
|
C9900-Z414
|
Adapter cable power supply connector for C63xx-0020 to
power supply connector for C63xx-0030/0040
|
Beckhoff Vietnam
|
C9900-Z424
|
Additional type plate inside front door for C510x
|
Beckhoff Vietnam
|
C9900-Z426
|
lock for C51xx, actuation without key
|
Beckhoff Vietnam
|
C9900-Z428
|
Burn in test report will be delivered with the IPC
|
Beckhoff Vietnam
|
C9900-Z431
|
Round connector female 16 + 3 P-type, with crimp contacts
type A ST A 278 FR91 61 0035 000
|
Beckhoff Vietnam
|
C9900-Z433
|
Label of a C6915, C6920, C6925 or C6930 without Beckhoff Logo
|
Beckhoff Vietnam
|
C9900-Z435
|
single packaging for every device of a delivery. price per device.
|
Beckhoff Vietnam
|
C9900-Z437
|
Additional serial number label, positioned under the drive flap
of an IPC type C69xx
|
Beckhoff Vietnam
|
C9900-Z439
|
Round connector female M23 12pin, cable max. 10.5mm, with crimp
contacts, Coninvers RM-12S1N8A1100
|
Beckhoff Vietnam
|
C9900-Z440
|
Round connector female M16 12pin, cable max. 14.5mm, with crimp
contacts, Coninvers RM-12S1N8A1300
|
Beckhoff Vietnam
|
C9900-Z444
|
Two label of a C6930 with Scheugenpflug logo instead of Beckhoff Logo
mounted on both sides of the PC.
Windows license label always on the right side of the device.
|
Beckhoff Vietnam
|
C9900-Z446
|
SATA cable for second HDD, pre-installed
|
Beckhoff Vietnam
|
C9900-Z447
|
Customized fan, type Finnpower
|
Beckhoff Vietnam
|
C9900-Z453
|
Industrial PC without power supply connector, instead shipment
with power supply connector, less price
|
Beckhoff Vietnam
|
C9900-Z455
|
Label of C6140 with customer-specific printing
co. Windmoeller & Hoelscher
|
Beckhoff Vietnam
|
C9900-Z456
|
Label of C6930 with customer-specific printing
co. Windmoeller & Hoelscher
|
Beckhoff Vietnam
|
C9900-Z462
|
Pictures for KCC Certificate, delivered by Email
|
Beckhoff Vietnam
|
C9900-Z465
|
Key set for key switch system Rafi FS+ compact
Suitable for key switches with key removal in several positions
|
Beckhoff Vietnam
|
C9900-Z466
|
Key set for key switch system Rafi FS+ compact
Suitable for key switches with key removal in 0 position
|
Beckhoff Vietnam
|
C9900-Z467
|
network cable for CP32xx-2xxx, length 0.7 m, assembled,
Harting push-pull Ethernet connector IP 65,
second end Harting push-pull Ethernet connector IP 65
|
Beckhoff Vietnam
|
C9900-Z468
|
Adapter cable Display Port to DVI, 40 cm
|
Beckhoff Vietnam
|
C9900-Z469
|
Key for the front flap of a C52xx
|
Beckhoff Vietnam
|
C9900-Z484
|
Device accessory for fulfilment of ATEX Certification II 3G Ex nA IIC
T4 Gc and II 3 D Ex tc IIIC T135 ºC Dc for CU8801-0000, CU8802-000x
und CU8803-000x:
This option includes a DIN rail mountable strain-relief thru the
customer in combination with CU8801-0000, CU8802-000x oder CU8803-000x.
The device accessory is a mandatory prerequisite for usage in
hazardous areas as covered by the before mentioned certificate for ATEX Zone 2/22.
Please also read the documentation for use in hazardous areas carefully.
|
Beckhoff Vietnam
|
C9900-Z485
|
Label of C6030-1001-0060 with customer-specific printing
co. DNWA, instead of standard label
|
Beckhoff Vietnam
|
C9900-Z497
|
RFID Multi reader for Legic or Mifare transponder
(multifrequency +125 kHz, with Bluetooth and SAM-Slot) inside the
front of customised Control Panel or Panel-PC for subsequent
installation. Only the reader is part of the supply! Cable and
mounting adapter are integrated in the customised Control Panel
or Panel-PC
|
Beckhoff Vietnam
|
C9900-Z498
|
Trade fair sample without function.
Sticker: Engineering Sample.
|
Beckhoff Vietnam
|
C9900-Z499
|
Key switch for exchange/retrofitting
type RAFI RAFIX 22 FS+ Kompakt, latching, rotating angle 1 x 90°, form L
key removable in position 0+1, lock type PG780001
2 keys included in delivery
|
Beckhoff Vietnam
|
CA1000-0010
|
CA1000-0010 Intel® Pentium® M 745, 1.8 GHz
|
Beckhoff Vietnam
|
CA1000-0020
|
CA1000-0020 CPU: Intel® Core™ Duo T2500, 2.0 GHz
|
Beckhoff Vietnam
|
CA1000-0025
|
CA1000-0025 CPU: Intel® Core™ 2 Duo T7400, 2.16 GHz
|
Beckhoff Vietnam
|
CA1000-0030
|
CA1000-0030 CPU: Intel Core2 Quad Q9100, 2,26GHz
|
Beckhoff Vietnam
|
CA1000-0035
|
CA1000-0035 CPU: Intel Core2 Duo T9400, 2,53GHz
|
Beckhoff Vietnam
|
CA1000-0040
|
CA1000-0040 CPU: Intel Celeron T3100, 1,9GHz
|
Beckhoff Vietnam
|
CA1000-0060
|
CA1000-0060 Intel Celeron B810 1.6 GHz rPGA988
|
Beckhoff Vietnam
|
CA1000-0061
|
CA1000-0061 Intel Core i3 2330E 2.2 GHz rPGA988
|
Beckhoff Vietnam
|
CA1000-0062
|
CA1000-0062 Intel Core i5 2510E 2.5 GHz rPGA988
|
Beckhoff Vietnam
|
CA1000-0063
|
CA1000-0063 Intel Core i7 2710QE 2,1GHz rPGA988
|
Beckhoff Vietnam
|
CA1100-0003
|
Memory module DDR-RAM-DIMM, 1024 MB
|
Beckhoff Vietnam
|
CA1100-0501
|
Memory module DDR-RAM SO-DIMM, 256 MB
|
Beckhoff Vietnam
|
CA1100-0502
|
Memory module DDR-RAM SO-DIMM, 512 MB
|
Beckhoff Vietnam
|
CA1100-0503
|
Memory module DDR-RAM SO-DIMM, 1024 MB
|
Beckhoff Vietnam
|
CA1100-0504
|
Memory module DDR3L-RAM SO-DIMM, 1600 MT/s, 2048 MB
|
Beckhoff Vietnam
|
CA1102-0002
|
Memory module DDR2RAM DIMM, 512 MB
|
Beckhoff Vietnam
|
CA1102-0003
|
Memory module DDR2RAM DIMM, 1024 MB
|
Beckhoff Vietnam
|
CA1102-0004
|
Memory module DDR2RAM DIMM, 2048 MB
|
Beckhoff Vietnam
|
CA1102-0502
|
Memory module DDR2RAM SO-DIMM, 512 MB
|
Beckhoff Vietnam
|
CA1102-0503
|
Memory module DDR2RAM SO-DIMM, 1024 MB
|
Beckhoff Vietnam
|
CA1102-0504
|
Memory module DDR2RAM SO-DIMM, 2048 MB
|
Beckhoff Vietnam
|
CA1103-0503
|
Memory module DDR3RAM SO-DIMM, 1024 MB,
Speed max.: DDR3 1066
|
Beckhoff Vietnam
|
CA1103-0504
|
Memory module DDR3RAM SO-DIMM, 2048 MB,
Speed max.: DDR3 1066
|
Beckhoff Vietnam
|
CA1103-0505
|
Memory module DDR3RAM SO-DIMM, 4096 MB,
Speed max.: DDR3 1066
|
Beckhoff Vietnam
|
CA1103-0513
|
Memory module DDR3RAM SO-DIMM, 1024 MB,
Speed max.: DDR3 1333
|
Beckhoff Vietnam
|
CA1103-0514
|
Memory module DDR3RAM SO-DIMM, 2048 MB,
Speed max.: DDR3 1333
|
Beckhoff Vietnam
|
CA1103-0515
|
Memory module DDR3RAM SO-DIMM, 4096 MB,
Speed max.: DDR3 1333
|
Beckhoff Vietnam
|
CA1200-0001
|
2GB SST Flash Memory
SST85LD1002U (BGA)
|
Beckhoff Vietnam
|
CA1200-0002
|
4GB SST Flash Memory
SST85LD1004M (BGA)
|
Beckhoff Vietnam
|
CA1200-0003
|
8GB SST Flash Memory
SST85LD1008M (BGA)
|
Beckhoff Vietnam
|
CA1200-1001-0001
|
SSD Modul MiniPCI 8GB MLC / 64 GB MLC
|
Beckhoff Vietnam
|
CA1900-0030-0001
|
POST Card SMB
|
Beckhoff Vietnam
|
CA1900-0050-0001
|
PC/104plus Debug Card
|
Beckhoff Vietnam
|
CA1900-0050-0002
|
PC/104plus POST Card
|
Beckhoff Vietnam
|
CA1900-0060-0001
|
USB 2.0 Climate Test Adaptor
|
Beckhoff Vietnam
|
CA1900-0065-0001
|
Climate test power supply
|
Beckhoff Vietnam
|
CA1900-0070-0001
|
Interface Board for standard PC interfaces
|
Beckhoff Vietnam
|
CA1940-0000-0004
|
PCI/104-Express Lab Backplane
Backplane for testing industrial Motherboards
PCIe/104 Type 1
|
Beckhoff Vietnam
|
CA1940-0000-0005
|
PCI/104-Express Lab Backplane
Backplane for testing industrial Motherboards
PCIe/104 Type 2
|
Beckhoff Vietnam
|
CA2000-0001
|
power supply unit P24V 136W
(suitable for CB3050/CB3051)
Input: 21...30 V
Output voltages: 5.0 V | 12.0 V | 5.0 V standby | 27.4 V
maximum current: 20.0 A | 5.0 A | 1.0 A | 1.4 A
UL-certified
|
Beckhoff Vietnam
|
CA2000-0010
|
power supply unit P24V 250W with fan (suitable for CB1050/CB1051)
with integrated electronic charging for UPS C9900-U330
Input: 22...30 V
Output voltages: 5.0 V | 12.0 V | 3.3 V | 27.4 V
maximum current: 14.0 A | 12.0 A | 12.0 A | 1.0 A
UL-certified
|
Beckhoff Vietnam
|
CA2000-0020-0001
|
power supply for CB30xxx
|
Beckhoff Vietnam
|
CA2000-0020-0002
|
power supply for CB30xx
14V - 30V Input
|
Beckhoff Vietnam
|
CA2000-0021
|
Power Supply Unit 24V 150W (suitable for CB30x0)
Input: 20 ... 30 V
Output: S5V5A / 5V17A / 3,3V10A / 12V8A
|
Beckhoff Vietnam
|
CA2000-0022-0001
|
EMC filter for power supply 7 V
|
Beckhoff Vietnam
|
CA2040-0000-0001
|
- PC/104 power supply 150W
- Galvanic Isolated
- Input: 7-36V
- Output: 5V/20A, S5V/2A, 3.3V/10A
- Temperature Monitoring
- Voltage Monitoring
- ATX Functionality
- Operating Hour Counter
- Status LEDs
|
Beckhoff Vietnam
|
CA2040-0000-0002
|
- PC/104 power supply 150W
- Galvanic Isolated
- Input: 15-36V
- Output: 5V/20A, S5V/2A, 3.3V/10A, 12V/10A
- Temperature Monitoring
- Voltage Monitoring
- ATX Functionality
- Operating Hour Counter
- Status LEDs
|
Beckhoff Vietnam
|
CA2040-0001-0001
|
Power Supply PCIe/104, not galvanic isolated, 7V
|
Beckhoff Vietnam
|
CA2040-0001-0002
|
Power Supply PCIe/104, not galvanic isolated, 14V
|
Beckhoff Vietnam
|
CA2040-0001-0003
|
PC/104 Power Supply, 7-30V Input, no 12V Output
|
Beckhoff Vietnam
|
CA2040-0001-0004
|
PC/104 Power Supply, 14-30V Input
|
Beckhoff Vietnam
|
CA3010-0000
|
cooling element kit for CB1050
|
Beckhoff Vietnam
|
CA3010-0001
|
cooling element kit for CB1051
|
Beckhoff Vietnam
|
CA3030-0000
|
cooling element kit for CB3050
|
Beckhoff Vietnam
|
CA3030-0001
|
cooling element kit for CB3051
|
Beckhoff Vietnam
|
CA4000-0002-0001
|
Galvanic Isolated RS485 Adaptor
|
Beckhoff Vietnam
|
CA4000-0002-0002
|
Galvanic Isolated RS232 Adaptor
|
Beckhoff Vietnam
|
CA4000-0005
|
M.2 card with miniPCIe socket
|
Beckhoff Vietnam
|
CA4030-0000
|
Battery board with cable (70mm) for CB3050/3051
|
Beckhoff Vietnam
|
CA4030-0201-0001
|
PCIe bus adapter 2x PCIe –x1
|
Beckhoff Vietnam
|
CA4031-0000
|
Connector board for CB3110 with RS232,
Power, 2xLAN, battery mounting
5 pole power connector
|
Beckhoff Vietnam
|
CA4031-1001-0001
|
Customer-specific M.2 module for customer Giesecke & Devrient
- 8GB SATA SSD
- USB Secure IC
|
Beckhoff Vietnam
|
CA4031-1001-0002
|
Kundenspezifisches M.2-Modul für Giesecke & Devrient
- Customer-specific M.2 module for customer Giesecke & Devrient
- 16 GB SATA SSD
- USB Secure IC
|
Beckhoff Vietnam
|
CA4031-1001-0004
|
Customer-specific M.2 module for customer Giesecke & Devrient
- 64GB SATA SSD
- USB Secure IC
|
Beckhoff Vietnam
|
CA4031-1002-0002
|
Customer-specific periphery board for CB3163
Customer: ADL - project: G&D
|
Beckhoff Vietnam
|
CA4031-1006-0001
|
Customer-specific periphery board for CB3163
- 1 x LAN 1GBit
- 1 x M.2 Slot
- 4 x UART over 2x COM Connector
- 16 x GPIOs
- 2 x USB 3.0
- 2 pole connector for battery
- 1 x Fan connector
|
Beckhoff Vietnam
|
CA4031-1006-0002
|
Customer-specific periphery board for CB6373
- 1 x LAN 1GBit
- 1 x M.2 Slot
- 4 x UART over 2x COM Connector
- 16 x GPIOs
- 2 x USB 3.0
- 2 pole connector for battery
- 1 x Fan connector
|
Beckhoff Vietnam
|
CA4031-1008-0001
|
Customer-specific periphery board for CB62xx, customer ADL
- 1 x BAseCon140 connector
- 1 x miniPCIe connector
- Side length: 75 mm x 38,63 mm
|
Beckhoff Vietnam
|
CA4031-1009-0001
|
Customer-specific riser card for CB62xx, customer ADL
- Riser card for BAseCon140 connector
- Slot height: 18 mm
|
Beckhoff Vietnam
|
CA4040-0000-0001
|
PCI-104 Ethernet Card 1x GBit LAN
|
Beckhoff Vietnam
|
CA4040-0000-0002
|
PCI-104 Ethernet Card 2x GBit LAN
|
Beckhoff Vietnam
|
CA4040-0001-0001
|
PCIe/104 Network Card 4x GBit
|
Beckhoff Vietnam
|
CA4040-0100-0001
|
PCI/104-Express Adaptor for DVI,
HDMI, IDE and SATA
|
Beckhoff Vietnam
|
CA4040-0100-0002
|
PCI/104-Express Adaptor for DVI/HDMI
|
Beckhoff Vietnam
|
CA4040-0200-0002
|
PCIe/104 to PCI Adaptor
|
Beckhoff Vietnam
|
CA5000-0001
|
cabel for battery board CA4000-0001
or B401/A186
|
Beckhoff Vietnam
|
CA5000-0002
|
Cabel I-PEX 1x30pin/ I-PEX 1x30pin 30pin 30cm
packaging unit: 5 pieces
|
Beckhoff Vietnam
|
CA5030-0273
|
Starrflex pcb for motherboard CB3060
|
Beckhoff Vietnam
|
CA5030-0277
|
Flex rigid PCB for PCIe connector on CB3054/CB3056
|
Beckhoff Vietnam
|
CA5031-0000
|
Cable set for connector board of CB3110
(6 cables: Power, USB, 2xLAN, RS232, battery)
|
Beckhoff Vietnam
|
CA5040-0001
|
cable set for CB4021/CB4050
to connect to CB9940-0001 interface boards
|
Beckhoff Vietnam
|
CA8030-1003
|
CB3010-0011
CB3010 3.5-inch Industrial Motherboard
-CPU type: CPU: Intel® IXP420, FSB: 133 MHz
Performance: 533 MHz
-Memory: Type: 32 MB Flash, 128 MB SDRM 133 MHz, 128 kB NOVRAM
-Graphic: Controller: Silicon Motion SM501, Memory: 8 MB
-Dimensions: (W x H x D) 147 mm x 20 mm x 102 mm
C9900-H510
128 MB Compact Flash card, extended temperature range
C9900-S403
Windows CE, English (NET) - installed at basic configuration
C9900-S701
TwinCAT PLC Runtime for Microsoft Windows CE
CP9832
Adapter board USB2.0 to compact flash adapter incl. cable
Operating system installed on internal flash memory, TwinCAT Runtime
installed on compact flash card
|
Beckhoff Vietnam
|
CA8030-1005
|
CB3053-0004
CB3053 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz no Touch
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
- 2x GBit Ethernet
-integrated 24V power supply
-Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
CA1102-0504
Memory module DDR2RAM SO-DIMM, 2048 MB
C9900-D170
Compact flash adaptor to install one compact flash card type I/II,
connector IDE 44 pin, 2 mm pitch
C9900-H517
8 GB Compact Flash card, extended temperature range
C9900-S417
Microsoft Windows Embedded Standard 7, single-language, English,
single finger touch screen support
FC9151-0000
Ethernet PC network card 10/100/1000 MBit/s, 1 channel, Mini PCI
Interface
C9900-P926
Power supply connector for Industrial PC C69xx or CP62xx, C63xx,
8-pin connectors with strain relief for the external power supply
cables
C9900-E159
Serial port COM2 RS232, optically linked, overload protection, D-sub
9-pin connector. An additional fieldbus interface card requires an
additional connector bracket, that is available at CP62xx with PCIe
module slot, C65xx with PCIe module slot or at C6930, only.
flat ribbon cable for connecting the compact flash adaptor
Batterypack 3V/225mAh 2032 incl. cable
The motherboard is mounted on a heat sink
|
Beckhoff Vietnam
|
CA8030-1011
|
Customer-specific assembly for motherboard CB3060
Fa. Hauni, HPN: 1933878-000-00
C9900-A311
CFast adaption board STA for C6525 and slot bracket
C9900-H552
16 GB CFast card, SLC flash, extended temperature range
C9900-S419
Microsoft Windows Embedded Standard 7, 32 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
|
Beckhoff Vietnam
|
CA9031-0000
|
WindowsCE for CB3110
(no NC included)
|
Beckhoff Vietnam
|
CB1052-0003
|
CB1051 ATX Industrial Motherboard, without processor, with 2x LAN
-Socket: mPGA479M
-Chipset: North Bridge: Intel® GM45, South Bridge: Intel® ICH9R
-Memory: Type: 2 x SODIMM204-1.5V / DDR3,
Speed max.: DDR3 1066
-Graphic: Controller Intel® GM45 integrated,
Memory:128 MB UMA/352 MB DVMT
-Dimensions: (W x H x D) 305 mm x 41 mm x 244 mm
|
Beckhoff Vietnam
|
CB3010-0001
|
CB3010 3.5-inch Industrial Motherboard
-CPU type: CPU: Intel® IXP420, FSB: 133 MHz
Performance: 266 MHz
-Memory: Type: 32 MB Flash, 128 MB SDRM 133 MHz, 128 kB NOVRAM
-Graphic: Controller: Silicon Motion SM501, Memory: 8 MB
-Dimensions: (W x H x D) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3010-0011
|
CB3010 3.5-inch Industrial Motherboard
-CPU type: CPU: Intel® IXP420, FSB: 133 MHz
Performance: 533 MHz
-Memory: Type: 32 MB Flash, 128 MB SDRM 133 MHz, 128 kB NOVRAM
-Graphic: Controller: Silicon Motion SM501, Memory: 8 MB
-Dimensions: (W x H x D) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3052-0005
|
CB3052 3.5-inch Industrial Motherboard
-CPU type: CPU: Intel® Celeron® M ULV 722, FSB: 1066 MHz
Performance: 1.2 GHz
-Chipset: North Bridge: Intel® GS45, South Bridge: Intel® ICH9M-E
-Memory: Type: 2 x SODIMM204-1.5V / DDR3,
-Graphic: Controller Intel® GS45 integrated,
Memory:128 MB UMA/352 MB DVMT
-Dimensions: (W x H x D ) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3052-0008
|
CB3052 3.5-inch Industrial Motherboard
-CPU type: CPU: Intel® Core™2 Duo SP9300, FSB: 1066 MHz
Performance: 2.26 GHz
-Chipset: North Bridge: Intel® GS45, South Bridge: Intel® ICH9M-E
-Memory: Type: 2 x SODIMM204-1.5V / DDR3,
-Graphic: Controller Intel® GS45 integrated,
Memory:128 MB UMA/352 MB DVMT
-Dimensions: (W x H x D ) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3053-0001
|
CB3053 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z510 1,1GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-2x GBit Ethernet
-Touchscreen Controller
-1s UPS
-integrated 24V power supply
Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3053-0002
|
CB3053 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
- 2x GBit Ethernet
- Touchscreen Controller
- 1s UPS
-integrated 24V power supply
-Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3053-0007
|
CB3051 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z510 1,1GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-2x GBit Ethernet
-integrated 24V power supply
Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3053-0008
|
CB3053 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
- 2x GBit Ethernet
-integrated 24V power supply
-Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3053-0011
|
CB3053 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z510 1,1GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
- 2x GBit Ethernet
-integrated 24V power supply
-Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3053-0012
|
CB3053 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
- 2x GBit Ethernet
-integrated 24V power supply
-Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3053-0015
|
CB3053 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z510 1,1GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
- 2x GBit Ethernet
- 1s UPS
-integrated 24V power supply
-Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3053-0016
|
CB3053 3.5" Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
- 2x GBit Ethernet
- 1s UPS
-integrated 24V power supply
-Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3054-0002
|
CB3054 3.5" Industrial Motherboard
- CPU type: Intel® Ceeleron® /Core™2Duo, FSB:1066 MHz
- Chipset: Intel® GS45
- Memory Type: 2x SODIMM204-1.5V / DDR3
- Graphic: Controller Intel® GS45, integrated
Memory: 128 MB UMA/352 MB DVMT
- 2x GBit Ethernet
- COM3RS232
- Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3060-0001
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Core i3 2.4GHz 4100E
- Socket: soldered
- Chipset: Intel® QM87
- Memory: Type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3060-0002
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Core i3 2.4GHz 4100E, 4x COM
- Socket: soldered
- Chipset: Intel® QM87
- Memory: Type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3060-0003
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Core i5 2.7GHz 4400E
- Socket: soldered
- Chipset: Intel® QM87
- Memory: Type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3060-0004
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Core i5 2.7GHz 4400E, 4x COM
- Socket: soldered
- Chipset: Intel® QM87
- Memory: Type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3060-0005
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Core i7 2.4GHz 4700EQ
- Socket: soldered
- Chipset: Intel® QM87
- Memory: Type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3060-0006
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Core i7 2.4GHz 4700EQ, 4x COM
- Socket: soldered
- Chipset: Intel® QM87
- Memory: Type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3060-0008
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Celeron 2000E, 2.2GHz, 4 x COM
- Socket: soldered
- Chipset: Intel® QM87
- Memory: Type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3060-0010
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Core i3 2.6GHz, 4 x COM
- Socket: soldered
- Chipset: Intel® QM87
- Memory: Type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3063-0003
|
CB3063 3.5" Industrial Motherboard
- CPU type: Intel® Atom™ E3845
- Socket: gelötet
- Chipset: Intel® E3845
- Memory Type: 2x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated
Memory: 512 MB DVMT
- 2x GBit Ethernet
Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3064-0001
|
CB3060 3.5-inch Industrial Motherboard
- CPU type: Intel® Celeron® /Core-i3/ Core-i5/ Core-i7 - 6. Generation
- Socket: LGA1151
- Chipset: Intel® Q170
- Memory: Type: 2 x SODIMM260-1.2V / DDR4
- Graphic: CPU integrated Graphics
- Memory: 512 MB DVMT
- 2 x GBit Ethernet
- Dimensions: (B x H x T) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3110-0005
|
CB3110 Compact Industrial Motherboard
-CPU type: CPU: Intel® IXP420, FSB: 133 MHz
Performance: 266 MHz
-Memory: Type: 32 MB Flash, 128 MB SDAM 133 MHz, 128 kB NOVRAM
-Graphic: Controller Silicon Motion SM501, Memory: 8 MB
-Dimensions: (W x H x D) 120 mm x 10 mm x 80 mm
|
Beckhoff Vietnam
|
CB3110-0014
|
CB3110 Compact Industrial Motherboard
-CPU type: CPU: Intel® IXP420, FSB: 133 MHz
Performance: 533 MHz
-Memory: Type: 32 MB Flash, 128 MB SDAM 133 MHz,
-Graphic: Controller Silicon Motion SM501, Memory: 8 MB
-Dimensions: (W x H x D) 120 mm x 10 mm x 80 mm
|
Beckhoff Vietnam
|
CB3110-0015
|
CB3110 Compact Industrial Motherboard
-CPU type: CPU: Intel® IXP420, FSB: 133 MHz
Performance: 533 MHz
-Memory: Type: 32 MB Flash, 128 MB SDAM 133 MHz, 128 kB NOVRAM
-Graphic: Controller Silicon Motion SM501, Memory: 8 MB
-Dimensions: (W x H x D) 120 mm x 10 mm x 80 mm
|
Beckhoff Vietnam
|
CB3150-0002
|
CB3150 Compact Industrial Motherboard
-CPU type: CPU: Intel® Celeron® M ULV 373, FSB: 400 MHz
Performance: 1.0 GHz
-Chipset: North Bridge: Intel® 855GME, South Bridge: Intel® ICH4
-Memory: Type: SODIMM200-2.5 V / DDR ECC, Speed max.: DDR 333
-Graphic: Controller Intel® 855GME integrated,
Memory:32 MB UMA
-Dimensions: (W x H x D) 120 mm x 10 mm x 80 mm
|
Beckhoff Vietnam
|
CB3163-0001
|
CB3163 - Industrial Motherboard
- CPU type: Intel® Atom- E3815 - 1,46GHz Single Core
- Memory: 2GB DDR3 RAM
- Graphic: CPU integrated
- 1 x USB 2.0
- 1 x USB 3.0
- 1 x DisplayPort
- 2 x GBit Ethernet
- Dimensions: (W x D x H) 75 mm x 20 mm x 75 mm
|
Beckhoff Vietnam
|
CB3163-0002
|
CB3163 - Industrial Motherboard
- CPU type: Intel® Atom- E3827 - 1,75GHz Dual Core
- Memory: 2GB DDR3 RAM
- Graphic: CPU integrated
- 1 x USB 2.0
- 1 x USB 3.0
- 1 x DisplayPort
- 2 x GBit Ethernet
- Dimensions: (W x D x H) 75 mm x 20 mm x 75 mm
|
Beckhoff Vietnam
|
CB3163-0003
|
CB3163 - Industrial Motherboard
- CPU type: Intel® Atom- E3845 - 1,91GHz Quad Core
- Memory: 2GB DDR3 RAM
- Graphic: CPU integrated
- 1 x USB 2.0
- 1 x USB 3.0
- 1 x DisplayPort
- 2 x GBit Ethernet
- Dimensions: (W x D x H) 75 mm x 20 mm x 75 mm
|
Beckhoff Vietnam
|
CB3163-0005
|
CB3163 - Industrial Motherboard
- CPU type: Intel® Atom- E3827 - 1,75GHz Dual Core
- Memory: 4GB DDR3 RAM
- Graphic: CPU integrated
- 1 x USB 2.0
- 1 x USB 3.0
- 1 x DisplayPort
- 2 x GBit Ethernet
- Dimensions: (W x D x H) 75 mm x 20 mm x 75 mm
|
Beckhoff Vietnam
|
CB3163-0006
|
CB3163 - Industrial Motherboard
- CPU type: Intel® Atom- E3845 - 1,91GHz Quad Core
- Memory: 4GB DDR3 RAM
- Graphic: CPU integrated
- 1 x USB 2.0
- 1 x USB 3.0
- 1 x DisplayPort
- 2 x GBit Ethernet
- Dimensions: (W x D x H) 75 mm x 20 mm x 75 mm
|
Beckhoff Vietnam
|
CB3263-0001
|
CB3263 3,5" Industrial Motherboard
- CPU type: Intel® Atom- E3815 - 1.46GHz Single Core
- Memory type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated
- 4 x USB 2.0
- 1 x DVI
- 3 x GBit Ethernet
- Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3263-0004
|
CB3263 3,5" Industrial Motherboard
- CPU type: Intel® Atom- E3827 - 1.75GHz Dual Core
- Memory type: 2x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated
- 4 x USB 2.0
- 1 x DVI
- 3 x GBit Ethernet
- Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3263-0005
|
CB3263 3,5" Industrial Motherboard
- CPU type: Intel® Atom- E3845 - 1.91GHz Quad Core
- Memory type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated
- 4 x USB 2.0
- 1 x DVI
- 3 x GBit Ethernet
- Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3263-0006
|
CB3263 3,5" Industrial Motherboard
- CPU-Type: Intel® Atom- E3815 - 1.46GHz Single Core
- Memory Type: 2 x SODIMM204-1.35V / DDR3L
- Grafik: CPU integrated
- 4 x USB 2.0
- 1 x DVI
- 2 x GBit Ethernet
- Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3263-0007
|
CB3263 3,5" Industrial Motherboard
- CPU type: Intel® Atom- E3827 - 1.75GHz Dual Core
- Memory type: 2 x SODIMM204-1.35V / DDR3L
- Grafic: CPU integrated
- 4 x USB 2.0
- 1 x DVI
- 2 x GBit Ethernet
- Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB3263-0008
|
CB3263 3,5" Industrial Motherboard
- CPU type: Intel® Atom- E3845 - 1.91GHz Quad Core
- Memory type: 2 x SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated
- 4 x USB 2.0
- 1 x DVI
- 2 x GBit Ethernet
- Dimensions: (W x D x H) 147 mm x 20 mm x 102 mm
|
Beckhoff Vietnam
|
CB4021-0002
|
CB4021 PC/104 Industral Motherboard
-CPU type: AMD LX800, FSB: 133 MHz,
Performance: 500 MHz
-Chipset: North Bridge: AMD Geode CS5536,
South Bridge: AMD Geode CS5536
-Memory: Type: SODIMM200-2.5V / DDR, Speed max.: DDR 400
-Graphic: Controller AMD LX800 integrated, Memory: 254 MB UMA
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4021-0004
|
CB4021 PC/104 Industral Motherboard
-CPU type: AMD LX800, FSB: 133 MHz,
Performance: 500 MHz
-Chipset: North Bridge: AMD Geode CS5536,
South Bridge: AMD Geode CS5536
-Memory: 2GB on board flash (Intel® Z-P140)
-Memory: Type: SODIMM200-2.5V / DDR, Speed max.: DDR 400
-Graphic: Controller AMD LX800 integrated, Memory: 254 MB UMA
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4021-0005
|
CB4021 PC/104 Industral Motherboard
-CPU type: AMD LX800, FSB: 133 MHz,
Performance: 500 MHz
-Chipset: North Bridge: AMD Geode CS5536,
South Bridge: AMD Geode CS5536
-Memory: 4GB on board flash
-Memory: Type: SODIMM200-2.5V / DDR, Speed max.: DDR 400
-Graphic: Controller AMD LX800 integrated, Memory: 254 MB UMA
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4021-0006
|
CB4021 PC/104 Industral Motherboard
-CPU type: AMD LX800, FSB: 133 MHz,
Performance: 500 MHz
-Chipset: North Bridge: AMD Geode CS5536,
South Bridge: AMD Geode CS5536
-Memory: 8GB on board flash
-Memory: Type: SODIMM200-2.5V / DDR, Speed max.: DDR 400
-Graphic: Controller AMD LX800 integrated, Memory: 254 MB UMA
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4050-0002
|
CB4050 PC/104 Industrial Motherboard
-CPU type: CPU: Intel® Celeron® M ULV 373, FSB: 400 MHz
Performance: 1.0 GHz
-Chipset: North Bridge: Intel® 855GME, South Bridge: Intel® ICH4
-Memory: Type: SODIMM200-2.5V / DDR ECC,
Speed max.: DDR 333
-Graphic: Controller Intel® 855GME integrated,
Memory:32 MB UMA
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4050-0005
|
CB4050 PC/104 Industrial Motherboard
-CPU type: CPU: Intel® Pentium® M 738, FSB: 400 MHz
Performance: 1.4 GHz
-Chipset: North Bridge: Intel® 855GME, South Bridge: Intel® ICH4
-Memory: Type: SODIMM200-2.5V / DDR ECC,
Speed max.: DDR 333
-Graphic: Controller Intel® 855GME integrated,
Memory:32 MB UMA
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4050-0007
|
CB4050 PC/104 Industrial Motherboard
-CPU type: CPU: Intel® Pentium® M 745, FSB: 400 MHz
Performance: 1.8 GHz
-Chipset: North Bridge: Intel® 855GME, South Bridge: Intel® ICH4
-Memory: Type: SODIMM200-2.5V / DDR ECC,
Speed max.: DDR 333
-Graphic: Controller Intel® 855GME integrated,
Memory:32 MB UMA
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4050-0008
|
CB4050 PC/104 Industrial Motherboard
-CPU type: CPU: Intel® Celeron® M 370, FSB: 400 MHz
Performance: 1.5 GHz
-Chipset: North Bridge: Intel® 855GME, South Bridge: Intel® ICH4
-Memory: Type: SODIMM200-2.5V / DDR ECC,
Speed max.: DDR 333
-Graphic: Controller Intel® 855GME integrated,
Memory:32 MB UMA
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4050-0010
|
CB4050 PC/104 Industrial Motherboard
-CPU type: CPU: Intel® Celeron® M 140, FSB: MHz
Performance: 1.0 GHz
-Chipset: North Bridge: Intel® 855GM, South Bridge: Intel® ICH4
-Memory: Type: SODIMM200-2.5V / DDR ECC,
Speed max.: DDR 333
-Graphic: Controller Intel® 855GM integrated,
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4050-0011
|
CB4050 PC/104 Industrial Motherboard
-CPU type: CPU: Intel® Celeron® M 140, FSB: MHz
Performance: 1.0 GHz
-Chipset: North Bridge: Intel® 842GM, South Bridge: Intel® ICH4
-Memory: Type: SODIMM200-2.5V / DDR ECC,
Speed max.: DDR 333
-Graphic: Controller Intel® 852GM integrated,
-Dimensions: (W x H x D) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4051-0001
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Celeron® M ULV 423, 1,07 GHz
-Chipset: North Bridge: Intel® 945GME, South Bridge: Intel® ICH7R
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® 945GME, integrated
Memory: 8 MB UMA/224 MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4051-0002
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Celeron® M ULV 440, 1,86 GHz
-Chipset: North Bridge: Intel® 945GME, South Bridge: Intel® ICH7R
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® 945GME, integrated
Memory: 8 MB UMA/224 MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4051-0004
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Core Duo® ULV U2500, 1,2 GHz
-Chipset: North Bridge: Intel® 945GME, South Bridge: Intel® ICH7R
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® 945GME, integrated
Memory: 8 MB UMA/224 MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4051-0005
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Core Duo® LV L2400, 1,66 GHz
-Chipset: North Bridge: Intel® 945GME, South Bridge: Intel® ICH7R
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® 945GME, integrated
Memory: 8 MB UMA/224 MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4051-0007
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Core2 Duo® T7400, 2,16 GHz
-Chipset: North Bridge: Intel® 945GME, South Bridge: Intel® ICH7R
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® 945GME, integrated
Memory: 8 MB UMA/224 MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4052-0001
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Celeron M 722 ULV 1,2GHz
-Chipset: North Bridge: Intel® GS45, South Bridge: Intel® ICH9M
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: Controller Intel® GS45, integrated
Memory: DVMT 5.0
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4052-0002
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Core2 Duo® SU9300, 1,2 GHz
-Chipset: North Bridge: Intel® GS45, South Bridge: Intel® ICH9M
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: Controller Intel® GS45, integrated
Memory: DVMT 5.0
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4052-0003
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Core2 Duo LV SL9400, 1,8GHz
-Chipset: North Bridge: Intel® GS45, South Bridge: Intel® ICH9M
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: Controller Intel® GS45, integrated
Memory: DVMT 5.0
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4052-0004
|
CB4051 PC/104 Industrial Motherboard
-CPU type: Intel® Core2 Duo SV SP9300, 2,26GHz
-Chipset: North Bridge: Intel® GS45, South Bridge: Intel® ICH9M
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: Controller Intel® GS45, integrated
Memory: DVMT 5.0
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-0001
|
CB4053 PC/104 Industrial Motherboard
-CPU type: Intel® Atom™ Z510 1,1GHz
-Chipset: Intel® SCH US15W
-Onboard flash:2GB SSD
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-0002
|
CB4053 PC/104 Industrial Motherboard
-CPU type: Intel® Atom™ Z510 1,1GHz
-Chipset: Intel® SCH US15W
-Onboard flash: 4GB SSD
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-0003
|
CB4053 PC/104 Industrial Motherboard
-CPU type: Intel® Atom™ Z510 1,1GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-0004
|
CB4053 PC/104 Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz
-Chipset: Intel® SCH US15W
-Onboard flash: 2GB SSD
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-0005
|
CB4053 PC/104 Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz
-Chipset: Intel® SCH US15W
-Onboard flash: 4GB SSD
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-0006
|
CB4053 PC/104 Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-0007
|
PC/104-Industrial-Motherboard
CPU: Intel® Atom Z510 1.1 GHz,
Chipset: SCH US15W,
Onboard flash: 8GB SSD,
Memory Type: SODIMM200-1.8V / DDR2,
Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/224 MB DVMT,
Dimensions: (B x H x T) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-0008
|
PC/104-Industrial-Motherboard
CPU: Intel® Atom Z530 1.6 GHz,
Chipset: SCH US15W,
Onboard flash: 8GB SSD,
Memory Type: SODIMM200-1.8V / DDR2,
Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/224 MB DVMT,
Dimensions: (B x H x T) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4053-1001
|
Customer specific motherboard for ADL
CB4053 PC/104 Industrial Motherboard
-CPU type: Intel® Atom™ Z530 1,6GHz
-Chipset: Intel® SCH US15W
-Memory: Type: SODIMM200-1.8V / DDR2
-Graphic: Controller Intel® SCH US15W, integrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4055-0001
|
CB4055 PC/104 Industrial Motherboard
-CPU type: Intel® Core i7 2655LE, 2,2GHz
-Chipset: Intel® QM67
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: CPU integrated, up to 512MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4055-0002
|
CB4055 PC/104 Industrial Motherboard
-CPU type: Intel® Core i5 2515E, 2,5GHz
-Chipset: Intel® QM67
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: CPU integrated, up to 512MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4055-0003
|
CB4055 PC/104 Industrial Motherboard
-CPU type: Intel® Celeron 827E, 1,4GHz
-Chipset: Intel® QM67
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: CPU integrated, up to 512MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4055-0004
|
CB4055 PC/104 Industrial Motherboard
-CPU type: Intel® Core i7 2715QE, 2,1GHz
-Chipset: Intel® QM67
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: CPU integrated, up to 512MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4055-0005
|
CB4055 PC/104 Industrial Motherboard
-CPU type: Intel® Core Intel® Core i7 3517UE, 1,7GHz
-Chipset: Intel® QM67
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: CPU integrated, up to 512MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4057-0001
|
CB4057 PC/104 Industrial Motherboard
-CPU type: Intel® Atom D425 1,8GHz
-Chipset: Intel® ICH9M-E
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: CPUintegrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4057-0002
|
CB4057 PC/104 Industrial Motherboard
-CPU type: Intel® Atom D525 1,8GHz
-Chipset: Intel® ICH9M-E
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: CPU integrated
Memory: 8 MB UMA/256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4058-0001
|
CB4058 PC/104 Industrial Motherboard
-CPU type: Intel® Atom N2600, 1.6GHz
-Memory: Type: SODIMM204-1.5V / DDR3
-Graphic: CPU integrated
Memory: 256 MB DVMT
-Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4060-0001
|
CB4060 PCIe/104 Industrial Motherboard
-CPU type: Intel® Core i5 4400E, 2,7GHz
-Chipset: Intel® QM87
-Memory: Type: SODIMM204-1.35V / DDR3L
-Graphic: CPU integrated, up to 512MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4060-0002
|
CB4060 PCIe/104 Industrial Motherboard
-CPU type: Intel® Core i7 4700EQ, 2,4GHz
-Chipset: Intel® QM87
-Memory: Type: SODIMM204-1.35V / DDR3L
-Graphic: CPU integrated, up to 512MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4060-0003
|
CB4060 PCIe/104 Industrial Motherboard
-CPU type: Intel® Celeron 2000E, 2,2GHz
-Chipset: Intel® QM87
-Memory: Type: SODIMM204-1.35V / DDR3L
-Graphic: CPU integrated, up to 512MB DVMT
-Dimensions: (W x D x H) 116 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4063-0001
|
CB4063 PC/104 Industrial Motherboard
- CPU type: Intel® Atom™ E3815, 1,46 GHz
- Memory: Type: SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated, up to 512MB DVMT
- Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4063-0002
|
CB4063 PC/104 Industrial Motherboard
- CPU type: Intel® Atom™ E3827, 1,75 GHz
- Memory: Type: SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated, up to 512MB DVMT
- Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB4063-0003
|
CB4063 PC/104 Industrial Motherboard
- CPU type: Intel® Atom™ E3845, 1,91 GHz
- Memory: Type: SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated, up to 512MB DVMT
- Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
|
Beckhoff Vietnam
|
CB6050-0002
|
CB6050 ETX Industrial Motherboard
-CPU type: CPU: Intel® Celeron® M ULV 373, FSB: 667 MHz
Performance: 1.0 GHz
-Chipset: North Bridge: Intel® 855GME, South Bridge: Intel® ICH4
-Memory: Type: SODIMM200-2.5V / DDR ECC,
Speed max.: DDR 333
-Graphic: Controller Intel® 855GME integrated,
Memory:32 MB UMA
-Dimensions: (W x H x D) 114 mm x 8 mm x 95 mm
|
Beckhoff Vietnam
|
CB6263-0002
|
CB6263-0002 Mini PC Motherboard
- CPU type: Intel® Atom- E3827, 1,75 GHz Cache1M
- Memory: 2 GB DDR3L-RAM
- Memory type: PCIe Typ M.2
- 2 x GBit Ethernet
- Dimensions: (W x H x D) 75 mm x 20 mm x 75 mm
|
Beckhoff Vietnam
|
CB6263-0005
|
CB6263-0005 Mini PC Motherboard
- CPU type: Intel® Atom™ E3827, 1.75 GHz Cache 1M
- Memory: 4 GB DDR3L-RAM
- Memory: PCIe Typ M.2
- 2 x GBit Ethernet
- Dimensions (W x H x D) 75 mm x 20 mm x 75 mm
|
Beckhoff Vietnam
|
CB6263-0006
|
CB6263 Mini PC Motherboard
- CPU type: Intel® Atom™ E3845, 1.91 GHz Cache2M
- Memory: 4 GB DDR3L-RAM
- Memory: PCIe Typ M.2
- 2 x GBit Ethernet
- Dimensions (W x H x D) 75 mm x 20 mm x 75 mm
|
Beckhoff Vietnam
|
CB6421-0001
|
CB6421 SODIMM-Motherboard
-CPU Type: AMD LX800, 500 MHz
-Chipset: North Bridge: AMD Geode CS5536,
South Bridge: AMD Geode CS5536
-Memory: Type: soldered, Speed max.: DDR 400, max. 512 MB
-Graphic Controller AMD LX800 integrated,
Memory:254 MB UMA
-Dimensions: (W x H x D) 56 mm x 8 mm x 67.7 mm
|
Beckhoff Vietnam
|
CB6464-0001
|
CB6464 Industrial Motherboard
- CPU type: Intel® Celeron®, Pentium®, Core™ i3, Core™ i5 or
Core™ i7 – 6th/7th generation
- socket: LGA1151
- chipset: Intel® Q170
- memory: Type: 2 x SODIMM260-1.2V / DDR4
- graphic: CPU integrated graphic
- 4 x GBit Ethernet
- Dimensions: (W x H x D) 120 mm x 35 mm x 120 mm
|
Beckhoff Vietnam
|
CB6467-0001
|
CB6467-0001 Nano-ITX Industrie-Motherboard
- CPU type: Intel® Celeron®, Pentium®, Core™ i3/i5/i7 - Coffee Lake R
- Socket: LGA1151
- Chipset: Intel® Q370
- Memory type: 2x sockets SODIMM260-1.2V / DDR4
- Graphic: CPU integrated graphics
- 4x GBit Ethernet (1x WoL), 4x USB3.0, 2x M.2 (2280)
- Dimensions: (W x H x D) 120 mm x 35 mm x 120 mm
|
Beckhoff Vietnam
|
CB7268-0003
|
CB7268-0003 Mini PC Motherboard
- CPU: Intel Core i3-8145UE, 2.20 GHz Dual-Core
- Memory: 4 GB DDR4
- 3x GBit Ethernet
- 4x USB 3.1
- 1x DisplayPort
- 1x M.2 slot
|
Beckhoff Vietnam
|
CB7268-0006
|
CB7268-0006 Mini PC Motherboard
- CPU: Intel Core i5-8365UE, 1.60 GHz Quad-Core
- Memory: 8 GB DDR4
- 3x GBit Ethernet
- 4x USB 3.1
- 1x DisplayPort
- 1x M.2 slot
|
Beckhoff Vietnam
|
CB9940-0001
|
Interface boards for PC/104 motherboards
(CB4021, CB4040, CB4050, CB4051, CB4053)
|
Beckhoff Vietnam
|
CP7002-1004-10
|
CP7002-1004 keyboard extension 10
|
Beckhoff Vietnam
|
CP7002-1004-11
|
CP7002-1004 keyboard extension 11
|
Beckhoff Vietnam
|
CP9035-H001
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H002
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H003
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
without keyboard or keyboard connector, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H004
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H006
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H007
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H008
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H009
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
without keyboard or keyboard connector, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H010
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H012
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, with touch pad (PS/2),
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H014
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H016
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H018
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H020
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H022
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H024
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or keyboard socket, with touch pad,
with serial socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H025
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or keyboard socket, with touch screen, with PS/2
mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H026
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H027
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or keyboard socket, with touch screen,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H028
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H029
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, PS/2 mouse socket,
without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H030
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and ADD card C9900-A160 or ADD2 card
C9900-A183, C9900-A184 or C9900-A197.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, PS/2 mouse socket,
without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H031
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 6.5 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with PS/2 mouse port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-H032
|
CP9035-H032
|
Beckhoff Vietnam
|
CP9035-I001
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I002
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I003
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
without keyboard or keyboard connector, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I004
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I006
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I007
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I008
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I009
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
without keyboard or keyboard connector, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I010
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I012
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and ADD card C9900-A160 or ADD2 card
C9900-A183, C9900-A184 or C9900-A197.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch pad (PS/2),
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I014
|
CP-Link Interfacekarte CP9035, PCI-Bus Steckkarte zum Einbau in PCs
mit ATX-Motherboard für Intel Pentium 4 und ADD-Karte C9900-A160.
Zum Anschluss eines Control Panels mit 10 Zoll Display,
mit Tastatur und/oder Tastaturbuchse, mit Touch Pad,
ohne serielle Buchse, mit Diskettenlaufwerk
|
Beckhoff Vietnam
|
CP9035-I016
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I018
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I020
|
CP9035-I020
|
Beckhoff Vietnam
|
CP9035-I022
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I024
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or keyboard socket, with touch pad,
with serial socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I025
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
with keyboard and/or keyboard socket, with touch screen, with PS/2
mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I026
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I027
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or keyboard socket, with touch screen,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I028
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I029
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch pad (PS/2),
with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I030
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, PS/2 mouse socket,
without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I031
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with PS/2 mouse port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-I032
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with PS/2 mouse port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J001
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J002
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J003
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
without keyboard or keyboard connector, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J004
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J006
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J007
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J008
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J009
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
without keyboard or keyboard connector, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J010
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J012
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch pad (PS/2),
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J014
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J016
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J018
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J020
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J022
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J024
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or keyboard socket, with touch screen, with PS/2
mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J025
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or keyboard socket, with touch screen, with PS/2
mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J026
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J027
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or keyboard socket, with touch screen,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J028
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J029
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch pad (PS/2),
with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J030
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, PS/2 mouse socket,
without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J031
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with PS/2 mouse port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-J032
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with PS/2 mouse port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K001
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K002
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K003
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
without keyboard or keyboard connector, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K004
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K004 PC-Einbau mit C9900-S900
|
CP9035-K004 PC-assembly with C9900-S900
|
Beckhoff Vietnam
|
CP9035-K004 PC-Einbau mit C9900-S900, für CB1061 ab G3, CB1064 und neuere
|
PC-assembly with C9900-S900, for CB1061 from G3, CB1064 and new
|
Beckhoff Vietnam
|
CP9035-K004 with C9900-S900
|
CP-Link interface card CP9035, with DDC file for 50 MHz pixelclock
instead of DDC file for 60 MHz pixelclock. PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K006
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K007
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K008
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K009
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
without keyboard or keyboard connector, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K010
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K012
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch pad (PS/2),
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K014
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K016
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K018
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K020
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K022
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K024
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or keyboard socket, with touch pad,
with serial socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K025
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or keyboard socket, with touch screen, with PS/2
mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K026
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K027
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or keyboard socket, with touch screen,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K028
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K029
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch pad (PS/2),
with serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K030
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard and internal DVI port.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, PS/2 mouse socket,
without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K031
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with PS/2 mouse port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-K032
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with ATX motherboard for Intel Pentium 4 and ADD card C9900-A160.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, with PS/2 mouse port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N001
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with 12 inch
display, without keyboard or keyboard connector, without touch screen
or touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N002
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, without
touch screen or touch pad, without serial port, without
floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N003
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, without keyboard or keyboard connector, with
touch screen, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N004
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, with
touch screen, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N006
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N008
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, without
touch screen or touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N010
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, with
touch screen, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N012
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, with touch pad
(PS/2), with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N016
|
Multi-CP-Link interface card CP9035 for 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard for Intel Pentium 4 and
ADD card C9900-A160. To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, with
touch screen, without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N018
|
Multi-CP-Link interface card CP9035 for 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard for Intel Pentium 4 and
ADD card C9900-A160. To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, with
touch pad, without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N025
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, with keyboard and/or keyboard socket, with
touch screen, with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-N026
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
12 inch display, with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P001
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, without keyboard or keyboard connector, without
touch screen or touch pad, without serial port, without
floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P002
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, with keyboard and/or Keyboard socket, without
touch screen or touch pad, without serial port, without
floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P003
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, without keyboard or keyboard connector, with
touch screen, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P004
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, with keyboard and/or Keyboard socket, with
touch screen, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P006
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P008
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, with keyboard and/or Keyboard socket, without
touch screen or touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P010
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, with keyboard and/or Keyboard socket, with
touch screen, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P025
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, with keyboard and/or keyboard socket, with
touch screen, with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P026
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P028
|
Multi-CP-Link interface card CP9035 for 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard for Intel Pentium 4 and
ADD card C9900-A160. To connect one Control Panel with
15 inch display, with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-P030
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with ATX motherboard and ADD card or
ADD2 card. To connect one Control Panel with
15 inch display, with keyboard and/or Keyboard socket, PS/2 mouse
socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-R004
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-R006
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 10 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S001
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S002
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S003
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
without keyboard or keyboard connector, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S004
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S006
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S008
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S009
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
without keyboard or keyboard connector, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S010
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S012
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch pad (PS/2),
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S016
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard for Intel® Celeron® M or Pentium® M.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S025
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
with keyboard and/or keyboard socket, with touch screen, with PS/2
mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S027
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard for Intel® Celeron® M or Pentium® M.
To connect one Control Panel with 12 inch display,
with keyboard and/or keyboard socket, with touch screen,
with PS/2 mouse socket, with floppy disk drive
|
Beckhoff Vietnam
|
CP9035-S030
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 12 inch display,
with keyboard and/or Keyboard socket, PS/2 mouse socket,
without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T001
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
without keyboard or keyboard connector, without touch screen or
touch pad, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T003
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
without keyboard or keyboard connector, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T004
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T006
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch pad,
without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T008
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, without touch screen or
touch pad, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T010
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, with touch screen,
with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T025
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
with keyboard and/or keyboard socket, with touch screen, with PS/2
mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T026
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-T030
|
CP-Link interface card CP9035, PCI bus card for installation in PCs
with slot motherboard.
To connect one Control Panel with 15 inch display,
with keyboard and/or Keyboard socket, PS/2 mouse socket,
without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-V004
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with slot motherboard.
To connect one Control Panel with
10 inch display, with keyboard and/or Keyboard socket, with
touch screen, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-W010
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with slot motherboard.
To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, with
touch screen, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-W030
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with slot motherboard.
To connect one Control Panel with
12 inch display, with keyboard and/or Keyboard socket, PS/2 mouse
socket, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-X004
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with slot motherboard.
To connect one Control Panel with
15 inch display, with keyboard and/or Keyboard socket, with
touch screen, without serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-X010
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with slot motherboard.
To connect one Control Panel with
15 inch display, with keyboard and/or Keyboard socket, with
touch screen, with serial port, without floppy disk drive
|
Beckhoff Vietnam
|
CP9035-X026
|
Multi-CP-Link interface card CP9035 as 2nd or 3rd card, PCI bus card
for installation in PCs with slot motherboard.
To connect one Control Panel with
15 inch display, with keyboard and/or keyboard socket, with touch pad,
with PS/2 mouse socket, without floppy disk drive
|
Beckhoff Vietnam
|
CU8004
|
4-port USB 2.0 hub
- 1 USB 2.0 input with USB B socket
- 4 USB 2.0 outputs with USB A socket
- delivers up to 1 A supply current at each USB downstream output
- USB transfer rate up to 480 Mbit/s, compatible to all USB standards
- plastic housing for DIN rail installation
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- 24 V DC power supply with power supply connector C9900-P935
|
Beckhoff Vietnam
|
CU8005
|
4-port USB 2.0 hub
- 1 USB 2.0 input with USB B socket
- 4 USB 2.0 outputs with USB A socket
- delivers up to 1 A supply current at each USB downstream output
- USB transfer rate up to 480 Mbit/s, compatible to all USB standards
- plastic housing for DIN rail installation
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- 24 V DC power supply
|
Beckhoff Vietnam
|
CU8006
|
4-port USB 3.0 hub
- 1 USB 3.0 input with USB B socket
- 4 USB 3.0 outputs with USB A socket
- delivers up to 1 A supply current at each USB downstream output
- USB transfer rate up to 5 Gbit/s, compatible to all USB standards
- plastic housing for DIN rail installation
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- 24 V DC power supply
- 1 m USB connector cable
|
Beckhoff Vietnam
|
CU8110-0120
|
Capacitive uninterruptible power supply (UPS)
Metal housing for mounting on DIN rail TS35x15 2.3
- storage technology: EDLC (capacitive)
- requires Windows Embedded Standard 7, Windows 7 Professional, Windows 7
Ultimate or Windows 10 IoT Enterprise
- power supply: 24 V DC (-15 %/+ 20 %)
- connection: 2 x 9-pin plug, push-in
- interfaces: USB or UPS OCT via 24 V DC power supply module, USB cable not
included in the scope of supply
- output voltage: min. 24 V DC
- max. input: 120 W
- max. output: 100 W
- capacity: 0.9 Wh
- fuse: electronic, 5 A
- diagnostic LEDs: 1 x Uin, 1 x I/O Uout, 1 x DIAG
- protection class: IP 20
- operating temperature: -25...+50 °C
- storage temperature: -25...+60 °C
- weight approx. 650 g
- dimensions (W x H x D): 100 x 100 x 90 mm
|
Beckhoff Vietnam
|
CU8130-0120
|
Battery-backed uninterruptible power supply (UPS)
Metal housing for mounting on DIN rail TS35x15 2.3
- storage technology: NiMh (battery)
- requires Windows Embedded Standard 7, Windows 7 Professional, Windows 7
Ultimate or Windows 10 IoT Enterprise
- power supply: 24 V DC (-15 %/+ 20 %)
- connection: 2 x 9-pin plug, push-in
- interfaces: USB or UPS OCT via 24 V DC power supply module, USB cable not
included in the scope of supply
- output voltage: min. 24 V DC
- max. input: 120 W
- max. output: 110 W
- capacity: 15 Wh
- fuse: electronic, 5 A
- diagnostic LEDs: 1 x Uin, 1 x I/O Uout, 1 x DIAG
- protection class: IP 20
- operating temperature: -10...+50 °C
- storage temperature: -20...+45°C (max. 6 months)
- weight approx. 800 g
- dimensions (W x H x D): 70 x 100 x 90 mm
|
Beckhoff Vietnam
|
CU8130-0240
|
Battery-backed uninterruptible power supply (UPS)
Metal housing for mounting on DIN rail TS35x15 2.3
- storage technology: NiMh (battery)
- requires Windows Embedded Standard 7, Windows 7 Professional, Windows 7
Ultimate or Windows 10 IoT Enterprise
- power supply: 24 V DC (-15 %/+ 20 %)
- connection: 2 x 9-pin plug, push-in
- interfaces: USB or UPS OCT via 24 V DC power supply module, USB cable not
included in the scope of supply
- output voltage: min. 24 V DC
- max. input: 240 W
- max. output: 220 W
- capacity: 30 Wh
- fuse: electronic, 10 A
- diagnostic LEDs: 1 x Uin, 1 x I/O Uout, 1 x DIAG
- protection class: IP 20
- operating temperature: -10...+50 °C
- storage temperature: -20...+45°C (max. 6 months)
- weight approx. 1200 g
- dimensions (W x H x D): 100 x 100 x 90 mm
|
Beckhoff Vietnam
|
CU8210-D001-0101
|
WLAN USB 2.0 Stick for North America (FCC)
- WiFi modes: 802.11 b, g, n, a, ac
- max. data rate: 72.2 Mbit/s (20 MHz), 150 Mbit/s (40 MHz), 433.3 Mbit/s (80 MHz)
- encryption scheme: WEP, WPA/WPA2 (TKIP/AES)
- operating system: Microsoft Windows 7 and Windows 10
- protection class: IP 20
- operating/storage temperature: 0 °C ... +70 °C/-40 °C ... +80 °C
- weight: approx. 5 g
- dimensions (W x H): 29.5 x 15 x 8 mm
|
Beckhoff Vietnam
|
CU8210-D001-0102
|
WLAN USB 2.0 Stick for Europe, Russia, South Africa, Korea, Israel, Taiwan, Australia, New Zealand, China, Japan
- WiFi modes: 802.11 b, g, n, a, ac
- max. data rate: 72.2 Mbit/s (20 MHz), 150 Mbit/s (40 MHz), 433.3 Mbit/s (80 MHz)
- encryption scheme: WEP, WPA/WPA2 (TKIP/AES)
- operating system: Microsoft Windows 7 and Windows 10
- protection class: IP 20
- operating/storage temperature: 0 °C ... +70 °C/-40 °C ... +80 °C
- weight: approx. 5 g
- dimensions (W x H): 29.5 x 15 x 8 mm
|
Beckhoff Vietnam
|
CU8210-D004-0101
|
4G USB 2.0 Stick for North Amercia
- LTE: R9 HSPA+/HSDPA/HSUPA/WCDMA: R8
- 4G band: B1/B2/B4/B5/B7/B12/B28
- 3G band: B1/B2/B4/B5
- 2G band: 850/900/1800/1900
- max. data rate: LTE DL 150 Mbit/s, UL 50 Mbit/s
- SIM slot: standard SIM
- operating system: Microsoft Windows 7 and Windows 10
- protection class: IP 20
- operating/storage temperature: -20 °C ... +55 °C/-40 °C ... +70 °C
- weight: approx. 30 g
- dimensions (W x H): 88 x 28 x 11.5 mm
|
Beckhoff Vietnam
|
CU8210-D004-0102
|
4G USB 2.0 Stick for EMEA (Europe, Middle East, Africa)
- LTE: R9 HSPA+/HSDPA/HSUPA/WCDMA: R8
- 4G band: B1/B3/B7/B8/B20
- 3G band: B1/B8
- 2G band: 850/900/1800/1900
- max. data rate: LTE DL 150 Mbit/s, UL 50 Mbit/s
- SIM slot: standard SIM
- operating system: Microsoft Windows 7 and Windows 10
- protection class: IP 20
- operating/storage temperature: -20 °C ... +55 °C/-40 °C ... +70 °C
- weight: approx. 30 g
- dimensions (W x H): 88 x 28 x 11.5 mm
|
Beckhoff Vietnam
|
CU8210-D004-0103
|
4G USB 2.0 Stick for Asia/ Australia
- LTE: R9 HSPA+/HSDPA/HSUPA/WCDMA: R8
- 4G band: B1/B3/B7/B8/B19/B28/B40
- 3G band: B1/B6/B8/B19
- 2G band: 850/900/1800/1900
- max. data rate: LTE DL 150 Mbit/s, UL 50 Mbit/s
- SIM slot: standard SIM
- operating system: Microsoft Windows 7 and Windows 10
- protection class: IP 20
- operating/storage temperature: -20 °C ... +55 °C/-40 °C ... +70 °C
- weight: approx. 30 g
- dimensions (W x H): 88 x 28 x 11.5 mm
|
Beckhoff Vietnam
|
CU8210-M001-0110
|
Cabinet dome for industrial WLAN and mobile network components
Dome covering one USB socket for use with wireless communication stick for WLAN, USB, Bluetooth or mobile networks
– includes on-molded 1 m USB cable with USB 2.0 plug, type A, for connection to an Industrial PC
– mounting style: panel mount
– wireless device interface: USB 2.0, type A
– protection class: IP 66
– operating/storage temperature: -40 °C … +60 °C/-40 °C … +85 °C
– weight: approx. 250 g
– dimensions (W x H x D): 54 x 120 x 54 mm
|
Beckhoff Vietnam
|
CU8210-M001-0130
|
Cabinet dome for industrial WLAN and mobile network components
Dome covering one USB socket for use with wireless communication stick for WLAN, USB, Bluetooth or mobile networks
– includes on-molded 3 m USB cable with USB 2.0 plug, type A, for connection to an Industrial PC
– mounting style: panel mount
– wireless device interface: USB 2.0, type A
– protection class: IP 66
– operating/storage temperature: -40 °C … +60 °C/-40 °C … +85 °C
– weight: approx. 325 g
– dimensions (W x H x D): 54 x 120 x 54 mm
|
Beckhoff Vietnam
|
CU8210-M001-0150
|
Cabinet dome for industrial WLAN and mobile network components
Dome covering one USB socket for use with wireless communication stick for WLAN, USB, Bluetooth or mobile networks
– includes on-molded 5 m USB cable with USB 2.0 plug, type A, for connection to an Industrial PC
– mounting style: panel mount
– wireless device interface: USB 2.0, type A
– protection class: IP 66
– operating/storage temperature: -40 °C … +60 °C/-40 °C … +85 °C
– weight: approx. 365 g
– dimensions (W x H x D): 54 x 120 x 54 mm
|
Beckhoff Vietnam
|
CU8800-0010
|
USB Extender Tx for CP69xx and CP79xx
- USB Extended transmitter box
- 1 USB input with USB B socket to be connected to the PC in maximum
1 m distance
- 1 USB Extended output with RJ 45 socket for up to 50 m CAT5 cable
for connecting a Control Panel with DVI/USB extended interface
CP69xx or CP79xx
- plastic housing for DIN rail installation
- USB transfer rate up to 12 Mbit/s for USB 1.1, downwards compatible
to USB 1.0
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- power supply via USB
- 1 m USB connector cable
|
Beckhoff Vietnam
|
CU8801-0000
|
USB Extender 2.0 Tx for CP29xx-0000 und CP39xx-0000
- USB Extended 2.0 transmitter box
- 1 USB input with USB B socket to be connected to the PC in maximum
1 m distance
- 1 USB Extended 2.0 output with RJ 45 socket for up to 50 m
CAT5 cable for connecting a Control Panel with DVI/USB extended 2.0
interface CP29xx-0000 or CP39xx-0000
- plastic housing for DIN rail installation
- USB transfer rate up to 480 Mbit/s for USB 2.0
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- power supply via USB
- 1 m USB connector cable
|
Beckhoff Vietnam
|
CU8802-0000
|
CP-Link 4 Extender Tx for connecting a Control Panel with CP-Link 4
Interface CP29xx-0010, CP39xx-0010 or CPX39xx-0010
- 1 USB input with USB B socket to be connected to the PC in maximum
1 m distance
- 1 DVI input with DVI-D socket to be connected to the PC in maximum
1 m distance
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- power supply for the Control Panel with connection of 24 V at
the Control Panel
- metal housing for DIN rail installation
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- 24 V input for power supply of the CU8802 transmitter box
- protection class IP 20
- operating temperature range 0...55 °C
- dimensions (W x H x D) 45 x 100 x 80 mm (1.8" x 3.9" x 3.1")
- 1 m USB connector cable
- 1 m DVI connector cable
|
Beckhoff Vietnam
|
CU8802-0000-1900
|
CP-Link 4 Extender Tx for connecting a Control Panel with CP-Link 4
Interface CP29xx-0010 or CP39xx-0010
- 1 USB input with USB B socket to be connected to the PC in maximum
1 m distance
- 1 DVI input with DVI-D socket to be connected to the PC in maximum
1 m distance
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- power supply for the Control Panel with connection of 24 V at
the Control Panel
- metal housing for DIN rail installation
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- 24 V input for power supply of the CU8802 transmitter box
- protection class IP 20
- operating temperature range 0...55 °C
- dimensions (W x H x D) 45 x 100 x 80 mm (1.8" x 3.9" x 3.1")
- 1 m USB connector cable
- 1 m DVI connector cable
With firmware revision for the use of Microsoft Windows Embedded
Compact 7 only
|
Beckhoff Vietnam
|
CU8802-0001
|
CP-Link 4 Extender Tx for connecting a Control Panel with
CP-Link 4 Interface CP29xx-0010, CP39xx-0010 or CPX39xx-0010 to a PC
C60xx or ATX PC with DisplayPort
- 1 USB input with USB B socket to be connected to the PC in maximum
1 m distance
- 1 DVI input with DVI-D socket to be connected to the PC in maximum
1 m distance
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- power supply for the Control Panel with connection of 24 V at
the Control Panel
- metal housing for DIN rail installation
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- 24 V input for power supply of the CU8802 transmitter box
- protection class IP 20
- operating temperature range 0...55 °C
- dimensions (W x H x D) 45 x 100 x 80 mm (1.8“ x 3.9“ x 3.1“)
- 1 m USB connector cable
- 1 m DisplayPort to DVI connector cable
|
Beckhoff Vietnam
|
CU8803-0000
|
CP-Link 4 Extender Tx for connecting a Control Panel with CP-Link 4
Interface CP29xx-0010, CP39xx-0010 or CPX39xx-0010
- 1 USB input with USB B socket to be connected to the PC in maximum
1 m distance
- 1 DVI input with DVI-D socket to be connected to the PC in maximum
1 m distance
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- power supply of the Control Panel with CU8803 via the CAT 6A cable
- metal housing for DIN rail installation
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- 24 V input for power supply of the CU8803 transmitter box
and the Control Panel
- protection class IP 20
- operating temperature range 0...55 °C
- dimensions (W x H x D) 70 x 100 x 80 mm (2.8" x 3.9" x 3.1")
- 1 m USB connector cable
- 1 m DVI connector cable
|
Beckhoff Vietnam
|
CU8803-0000-1900
|
CP-Link 4 Extender Tx for connecting a Control Panel with CP-Link 4
Interface CP29xx-0010 or CP39xx-0010
- 1 USB input with USB B socket to be connected to the PC in maximum
1 m distance
- 1 DVI input with DVI-D socket to be connected to the PC in maximum
1 m distance
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- power supply of the Control Panel with CU8803 via the CAT 6A cable
- metal housing for DIN rail installation
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- 24 V input for power supply of the CU8803 transmitter box
and the Control Panel
- protection class IP 20
- operating temperature range 0...55 °C
- dimensions (W x H x D) 70 x 100 x 80 mm (2.8" x 3.9" x 3.1")
- 1 m USB connector cable
- 1 m DVI connector cable
With firmware revision for the use of Microsoft Windows Embedded
Compact 7 only
|
Beckhoff Vietnam
|
CU8803-0001
|
CP-Link 4 Extender Tx for connecting a Control Panel with
CP-Link 4 Interface CP29xx-0010, CP39xx-0010 or CPX39xx-0010 to a PC
C60xx or ATX PC with DisplayPort
- 1 USB input with USB B socket to be connected to the PC in maximum
1 m distance
- 1 DVI input with DVI-D socket to be connected to the PC in maximum
1 m distance
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- power supply of the Control Panel with CU8803 via the CAT 6A cable
- metal housing for DIN rail installation
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- 24 V input for power supply of the CU8803 transmitter box
and the Control Panel
- protection class IP 20
- operating temperature range 0...55 °C
- dimensions (W x H x D) 70 x 100 x 80 mm (2.8“ x 3.9“ x 3.1“)
- 1 m USB connector cable
- 1 m DisplayPort to DVI connector cable
|
Beckhoff Vietnam
|
CU8810
|
DVI splitter for CP69xx and CP79xx
- metal housing for DIN rail installation
- compact industrial design
- 2 DVI-D inputs
- 4 DVI-D outputs
- assignment of the 4 DVI outputs to the 2 inputs freely configurable
via DIP switches
- DVI inputs and outputs with full DVI data range up to 1.65 Gbit/s
- unused DVI input and outputs can be switched off to save energy
- 1 USB input with USB B socket
- 4-port USB hub with 4 USB Extended outputs as RJ 45 connectors
- USB transfer rate up to 12 Mbit/s for USB 1.1, downwards compatible
to USB 1.0
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 146.5 x 100 x 38 mm (5.8" x 4" x 1.5")
- 24 V DC power supply
|
Beckhoff Vietnam
|
CU8815
|
DVI splitter without USB extender
- metal housing for DIN rail installation
- compact industrial design
- 2 DVI-D inputs
- 4 DVI-D outputs
- assignment of the 4 DVI outputs to the 2 inputs freely configurable
via DIP switches
- DVI inputs and outputs with full DVI data range up to 1.65 Gbit/s
- unused DVI input and outputs can be switched off to save energy
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 146.5 x 100 x 38 mm (5.8" x 4" x 1.5")
- 24 V DC power supply
|
Beckhoff Vietnam
|
CU8820
|
Extender Box
- DVI/USB Input
- DVI-E/USB-E/Power OUT
- extending DVI-E/USB-E/Power via round cable
- compact industrial design
- userfriendly installation via integrated DIN rail adapter
|
Beckhoff Vietnam
|
CU8850
|
USB Extender Rx
- USB Extended receiver box
- 1 USB Extended input with RJ 45 socket for up to 50 m CAT5 cable
- 1 USB output with USB A socket to be connected to an USB device in
maximum 5 m distance
- quick error analysing with diagnostic LEDs
- plastic housing for DIN rail installation
- USB transfer rate up to 12 Mbit/s for USB 1.1, downwards compatible
to USB 1.0
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- 24 V DC power supply
|
Beckhoff Vietnam
|
CU8851
|
CU8851-0000 USB Extender Rx for CU8801
- USB Extended receiver box
- 1 USB Extended input with RJ 45 socket for up to 50 m CAT5 cable
- 1 USB output with USB A socket to be connected to an USB device in
maximum 5 m distance
- quick error analysing with diagnostic LEDs
- plastic housing for DIN rail installation
- USB transfer rate up to 480 Mbit/s for USB 2.0
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- 24 V DC power supply
|
Beckhoff Vietnam
|
CU8860
|
USB-Extender-Rx, receive USB signals from sending box CU8800 over
max.50m, it also conditions the DVI signal up to 50m cable distance
- User-friendly installation via integrated DIN rail adapter
- Optional installation via DIN adapter
- 24V DC supply voltage - the standard in industrial environments
- 12 Mbit and 1.5 Mbit support for compatibility to all 1.1 standards
- Standard CAT network cable for extension
- compact industrial design
- clear quick diagnosis by separate LEDs for USB and DVI conditions
|
Beckhoff Vietnam
|
CU8860-1000
|
USB-Extender-Rx, receive USB signals from sending box CU8800 over
max.50m, it also conditions the DVI signal up to 50m cable distance
- User-friendly installation via mounting kit
- 24V DC supply voltage - the standard in industrial environments
- 12 Mbit and 1.5 Mbit support for compatibility to all 1.1 standards
- Standard CAT network cable for extension
- compact industrial design
- clear quick diagnosis by separate LEDs for USB and DVI conditions
|
Beckhoff Vietnam
|
CU8870
|
USB Compact Flash slot
- Compact Flash slot for CF cards type I and II
- front LED indicators for: PWR (power), LOCK (read only) and CF
(access)
- 1 USB 2.0 input with USB B socket
- USB transfer rate up to 480 Mbit/s, compatible to all USB standards
- plastic housing for DIN rail installation
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- power supply via USB
- 1 m USB connector cable
|
Beckhoff Vietnam
|
CU8871-0000
|
USB CFast slot
- CFast slot
- front LED indicators for: PWR (power), LOCK (read only) and CFast
(access)
- 1 USB 3.0 input with USB B socket
- plastic housing for DIN rail installation
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- power supply via USB
- 1 m USB connector cable
|
Beckhoff Vietnam
|
CU8879-0000
|
eSATAp Compact Flash slot
- Compact Flash slot for CF cards type I and II
- front LED indicators for: LOCK (read only) and CF (access)
- 1 eSATAp input with eSATAp socket
- data transfer rate up to 1.5 Gb/s
- plastic housing for DIN rail installation
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- power supply via eSATAp
- 1 m eSATAp connector cable
|
Beckhoff Vietnam
|
CU8880-0010
|
Ethernet controller with USB input
- Ethernet controller box
- 1 USB 2.0 input with USB B socket
- 1 Ethernet interface with 1 x 10/100BASE-T connector RJ 45
- not suitable for real-time Ethernet or EtherCAT
- plastic housing for DIN rail installation
- protection class IP 20
- operating temperature 0...55 °C
- dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
- power supply via USB
- 1 m USB connector cable
|
Beckhoff Vietnam
|
CX1000-N002
|
Interface Module for 2 x RS 232 connection (COM2 + COM3)
- full 115 kBit/s on both channels
- COM2: RXD,TXD, DTR
- COM3: RXD,TXD
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 70 g
- Dimensions (W x H x D)
19 x 100 x 91 mm (0,75" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1000-N003
|
Interface Module for Stereo Audio In/Out connection
- Line In
- Mic In (microphone signal input)
- Line Out (also for headphone), max. 200 mW
- Built-in beeper
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 70 g
- Dimensions (W x H x D)
19 x 100 x 91 mm (0,75" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1000-N005
|
Interface module for 2 x RS485/422 (COM2+COM3), optically isolated
-Full 115 kBaud on both channels
-optically isolated interfaces
-Modes: RS485, with/without echo, with/without termination
RS422, full duplex, end-point
-Pre-assembled in the factory, cannot be upgraded
-Protection class: IP20
-Operating/storage temperature: 0°C...+55°C/-25°C...+85°C
-Weight: 80 g
-Dimensions (W x H x D) 19 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1010-N020
|
Interface Module for Stereo Audio In/Out connection
- Line In
- Mic In (microphone signal input)
- Line Out (also for headphone), max. 200 mW
- Built-in beeper
- Pre-assembled in the factory, cannot be upgraded
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85°
- Weight approx. 80 g
- Dimensions (W x H x D)
19 x 100 x 91 mm (0,75" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1010-N030
|
Interface Module for 2 x RS 232 connection (COM1 + COM2)
- full 115 kBit/s on both channels
- optically isolated interfaces
- Pre-assembled in the factory, cannot be upgraded
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85°
- Weight approx. 80 g
- Dimensions (W x H x D)
19 x 100 x 91 mm (0,75" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1010-N031
|
Interface module for 2 x RS422/485 (COM1+COM2), optically isolated
- Can only be used instead of and not at the same time as CX1010-N0302
- Full 115 kBaud on both channels
- optically isolated interfaces
- Modes: RS485, with/without echo, with/without termination
RS422, full duplex
- Pre-assembled in the factory, cannot be upgraded
- Protection class: IP20
- Operating/storage temperature: 0°C...+55°C/-25°C...+85°C
- Weight: 80 g
- Dimensions (W x H x D) 19 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1010-N040
|
Interface Module for 2 x RS 232 connection (COM3 + COM4)
- full 115 kBit/s on both channels
- optically isolated interfaces
- Pre-assembled in the factory, cannot be upgraded
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85°
- Weight approx. 80 g
- Dimensions (W x H x D)
19 x 100 x 51 mm (0,75" x 3,94" x 2,00")
|
Beckhoff Vietnam
|
CX1010-N041
|
Interface module for 2 x RS422/485 (COM3+COM4), optically isolated
- Can only be used instead of and not at the same time as CX1010-N0
- Full 115 kBaud on both channels
- optically isolated interfaces
- Modes: RS485, with/without echo, with/without termination
RS422, full duplex
- Pre-assembled in the factory, cannot be upgraded
- Protection class: IP20
- Operating/storage temperature: 0°C...+55°C/-25°C...+85°C
- Weight: 80 g
- Dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1010-N060
|
Interface module for 10/100 MBit Ethernet at CX1010 CPUs
- implements the second internal LAN controller as standard Ethernet
interface
- maximum permitted CAT cable length 15 m
- simple retrofitting in the field
(caution: specified mounting position see documentation)
- cannot be used simultaneously with EtherCAT CX1100-0004 power supply
unit
- protection class: IP 20
- operating/storage temperature: 0°C ... +55°C/-25°C ...+85°C
- weight: approx. 71 g
- dimensions (W x H x D): 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1020-N020
|
Interface module for stereo audio in/out connection
– Line In
– Line Mic
– Line Out (also for headphone), max. 200 mW
– built-in PC beeper
– ex factory pre-assembled, no field modification possible
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1020-N030
|
Interface module for 2 x RS232 connections (COM1 + COM2)
– full 115 kbaud on both channels
– electrically isolated interfaces (optically isolated)
– ex factory pre-assembled, no field modification possible
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1020-N031
|
Interface module for 2 x RS422/RS485 connections
optically isolated (COM1 + COM2)
– can only be used instead of and not at the same time as CX1020-N030
– full 115 kbaud on both channels
– electrically isolated interfaces (optically isolated)
– modes: RS485: with/without echo, with/without termination,
RS422: full duplex
– pre-assembled in the factory, cannot be upgraded
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... + 85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1020-N040
|
Interface module for 2 x RS232 connections (COM3 + COM4)
– full 115 kbaud on both channels
– electrically isolated interfaces (optically isolated)
– ex factory pre-assembled, no field modification possible
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1020-N041
|
Interface module for 2 x RS422/RS485 connections
optically isolated (COM3 + COM4)
– can only be used instead of and not at the same time as CX1020-N030
– full 115 kbaud on both channels
– electrically isolated interfaces (optically isolated)
– modes: RS485: with/without echo, with/without termination,
RS422: full duplex
– pre-assembled in the factory, cannot be upgraded
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... + 85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1020-N060
|
10/100 Mbit Ethernet interface module
Interface module for 10/100 Mbit Ethernet at CX1020 CPUs
– implements the second internal LAN controller as standard Ethernet
interface
– maximum permitted CAT cable length 20 m
– simple retrofitting in the field
(caution: specified mounting position see documentation)
– cannot be used simultaneously with EtherCAT CX1100-0004 power
supply unit
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1020-N070
|
Extension module for 4 USB ports
- 4 x USB 2.0 ports type A, current output max. 500 mA
- suppports USB 1.1 and USB 2.0 standard
- transfer rates: 1.5 Mbit/s, 12 Mbit/s and 480 Mbit/s
- for field assembly*
*not simultaneous with CX1020-A001
|
Beckhoff Vietnam
|
CX1030-N020
|
Interface module for stereo audio in/out connection
– Line In
– Line Mic
– Line Out (also for headphone), max. 200 mW
– built-in PC beeper
– ex factory pre-assembled, no field modification possible
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1030-N030
|
Interface module for 2 x RS232 (COM1+COM2)
- Full 115 kBaud on both channels
- optically isolated interfaces
- Pre-assembled in the factory, cannot be upgraded
- Protection class: IP20
- Operating/storage temperature: 0°C...+55°C/-25°C...+85°C
- Weight: 80 g
- Dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1030-N031
|
Interface module for 2 x RS232 (COM1+COM2), optically isolated
- Full 115 kBaud on both channels
- optically isolated interfaces
- Can only be used instead of and not at the same time as CX1030-N030
- Modes: RS485, with/without echo, with/without termination
RS422, full duplex
- Pre-assembled in the factory, cannot be upgraded
- Protection class: IP20
- Operating/storage temperature: 0°C...+55°C/-25°C...+85°C
- Weight: 80 g
- Dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1030-N040
|
Interface module for 2 x RS232 (COM3+COM4)
- Full 115 kBaud on both channels
- optically isolated interfaces
- Pre-assembled in the factory, cannot be upgraded
- Protection class: IP20
- Operating/storage temperature: 0°C...+55°C/-25°C...+85°C
- Weight: 80 g
- Dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1030-N041
|
Interface module for 2 x RS422/RS485 (COM3+COM4), optically isolated
- Can only be used instead of and not at the same time as CX1030-N040
- Full 115 kBaud on both channels
- optically isolated interfaces
- Modes: RS485, with/without echo, with/without termination
RS422, full duplex
- Pre-assembled in the factory, cannot be upgraded
- Protection class: IP20
- Operating/storage temperature: 0°C...+55°C/-25°C...+85°C
- Weight: 80 g
- Dimensions (W x H x D) 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1030-N060
|
Interface module for 10/100 MBit Ethernet at CX1030 CPUs
- implements the second internal LAN controller as standard Ethernet
interface
- maximum permitted CAT cable length 20 m
- simple retrofitting in the field
(caution: specified mounting position see documentation)
- cannot be used simultaneously with EtherCAT CX1100-0004 power supply
unit
- protection class: IP 20
- operating/storage temperature: 0°C ... +55°C/-25°C ...+85°C
- weight: approx. 71 g
- dimensions (W x H x D): 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1100-0001
|
Power supply unit for CX1000, CX1010 and CX1020
without K-Bus capability
- 24 V DC (-15%/+20%)
- 8 kByte NOVRAM
- FSTN display 2 lines x 16 characters of text, lighted,
Navi switch 4+1
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 170 g
- Dimensions (W x H x D)
45 x 100 x 91 mm (1,77" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1100-0002
|
Power supply unit for CX1000, CX1010 and CX1020 with K-Bus capability
- 24 V DC (-15%/+20%)
- integrated K-Bus controller
- K-bus power supply 1.75 A
- 8 kByte NOVRAM
- 2 kByte DPRAM I/O memory for K-Bus process data
- FSTN display 2 lines x 16 characters of test, lighted,
Navi switch 4+1
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 195 g
- Dimensions (W x H x D)
39 x 100 x 91 mm (1,54" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1100-0002-2001
|
CX1100-0002-2001 CX1100-0002-2001 Dornier customized power supply + K-bus interface (varnished BLP)
|
Beckhoff Vietnam
|
CX1100-0003
|
Power supply unit for CX1000, CX1010 and CX1020
with K-Bus capability and IP-Link capability
- 24 V DC (-15%/+20%)
- Integrated K-Bus controller and IP-Link controller
- 8 kByte NOVRAM
- 4 kByte I/O memory for process data
(shared with K-Bus process data)
- FSTN display 2 lines x 16 characters of text, lighted
Navi switch 4+1
Beckhoff IP-Link master interface module (1-channel)
- Connects up to 64 I/O stations of
Beckhoff IP 67 Field Bus box modules type IExxxx
- optical fiber based bus
- 2 Mbaud communication speed
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 275 g
- Dimensions (W x H x D)
58 x 100 x 91 mm (2,28" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1100-0004
|
Power supply unit for CX1010 and CX1020, core with E-bus capability
– power supply 24 V DC (-15%/+20%)
– E-bus connection (adapter terminal)
– E-bus power supply up to 2 A
– 8 kbyte NOVRAM
– FSTN display 2 rows x 16 chars, lighted
– diagnostics LED: 1 x PWR, 1 x L/A, 1 x RUN
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... + 85 °C
– weight approx. 250 g
– dimensions (W x H x D) 39 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1100-0012
|
Power supply unit for CX1030, core with K-bus capability
– 24 V DC (-15%/+20%)
– integrated K-bus controller
– K-bus power supply max. 1.75 A
– 8 kbyte NOVRAM
– 2 kbyte DPRAM I/O memory for K-bus preocess data
– FSTN display 2 lines x 16 characters of text, lighted
Navi switch 4+1
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... + 85 °C
– weight approx. 240 g
– dimensions (W x H x D) 42 x 109 x 92 mm
|
Beckhoff Vietnam
|
CX1100-0013
|
Power supply unit for CX1030, core with K-bus capability and
IP-Link capability
– 24 V DC (-15%/+20%)
– integrated K-bus cotroller and IP-Link controller
– 8 kbyte NOVRAM
– 4 kbyte I/O memory for process data (shared with K-bus process data)
– FSTN display 2 lines x 16 charcaters of text, lighted,
Navi switch 4+1
– Beckhoff IP-Link master interface module ( 1-channel):
– connects up to 64 I/O stations of Beckhoff IP 67 Fieldbus Box
modules type IExxxx
– optical fiber based bus
– 2 MBaud communication speed
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... + 85 °C
– weight approx. 325 g
– dimensions (W x H x D) 61 x 109 x 92 mm
|
Beckhoff Vietnam
|
CX1100-0014
|
Power supply unit for CX1030, core with E-bus capability
– power supply 24 V DC (-15%/+20%)
– E-bus connection (adapter terminal)
– E-bus power supply up to 2 A
– 8 kbyte NOVRAM
– FSTN display 2 lines x 16 characters of text, lighted
Navi switch 4+1
– diagnostics LED: 1 x PWR, 1 x L/A, 1 x RUN
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... + 85 °C
– weight approx. 235 g
– dimensions (W x H x D) 42 x 109 x 92 mm
|
Beckhoff Vietnam
|
CX1100-0900
|
UPS module for uninterruptible power supply of the CX controller
- suitable for CX1000 and CX1010
- electric charge: 20 As
- output current max. 550 mA (24 V DC)
- simple retrofitting in the field by adding to existing CX controller
is possible
- maintenance-free due to advanced capacitive technology (Supercaps)
- bridging time adjustable via rotary selection switch
(load-dependent)
- LED status indicator for 24V IN OK, 24V OUT OK, CHARGE
- UPS status can be queried via TwinCAT or DPRAM interface
- protection class IP 20
operating/storage temperature 0 °C ...+55 °C/-25 °C ...+85 °C
- weight approx. 345 g
- dimensions: (W x H x D) 57 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1100-0900-2001
|
CX1100-0900-2001 Dornier customized USV-module 24V 0.55A 20As PCBs under seal
|
Beckhoff Vietnam
|
CX1100-0910
|
UPS module for uninterruptible power supply of the CX controller
- suitable for CX1000 and CX1010
- electric charge: 20 As
- output current max. 1100 mA (24 V DC)
- simple retrofitting in the field by adding to existing CX controller
is possible
- maintenance-free due to advanced capacitive technology (Supercaps)
- bridging time adjustable via rotary selection switch
(load-dependent)
- LED status indicator for 24V IN OK, 24V OUT OK, CHARGE
- UPS status can be queried via TwinCAT or DPRAM interface
- protection class IP 20
operating/storage temperature 0 °C ...+55 °C/-25 °C ...+85 °C
- weight approx. 465 g
- dimensions: (W x H x D) 76 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1100-0915
|
UPS module for uninterruptible power supply of the CX controller
- suitable for CX1000 and CX1010
- electric charge: 20 As
- output current max. 2000 mA (24 V DC)
- simple retrofitting in the field by adding to existing CX controller
is possible
- maintenance-free due to advanced capacitive technology (Supercaps)
- bridging time adjustable via rotary selection switch
(load-dependent)
- LED status indicator for 24V IN OK, 24V OUT OK, CHARGE
- UPS status can be queried via TwinCAT or DPRAM interface
- protection class IP 20
operating/storage temperature 0 °C ...+55 °C/-25 °C ...+85 °C
- weight approx. 345 g
- dimensions: (W x H x D) 57 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1100-0920
|
UPS module for uninterruptible power supply of the CX controller
- suitable for CX1000, CX1010 and CX1020 (not CX1030)
- electric charge: 40 As
- output current max. 1100 mA (24 V DC)
- simple retrofitting in the field by adding to existing CX controller
is possible
- maintenance-free due to advanced capacitive technology (Supercaps)
- bridging time adjustable via rotary selection switch
(load-dependent)
- LED status indicator for 24V IN OK, 24V OUT OK, CHARGE
- UPS status can be queried via TwinCAT or DPRAM interface
- protection class IP 20
operating/storage temperature 0 °C ...+55 °C/-25 °C ...+85 °C
- weight approx. 617 g
- dimensions: (W x H x D) 95 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1100-0930
|
UPS module for uninterruptible power supply of the CX controller
- suitable for CX1000, CX1010, CX1020 and CX1030
- electric charge: 40 As
- output current max. 2000 mA (24 V DC)
- simple retrofitting in the field by adding to existing CX contr
is possible
- maintenance-free due to advanced capacitive technology (Superca
- bridging time adjustable via rotary selection switch
(load-dependent)
- LED status indicator for 24V IN OK, 24V OUT OK, CHARGE
- UPS status can be queried via TwinCAT or DPRAM interface
- protection class IP 20
operating/storage temperature 0 °C ...+55 °C/-25 °C ...+85 °C
- weight approx. 617 g
- dimensions: (W x H x D) 95 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX1200-0010
|
Extension module for additional USB ports
|
Beckhoff Vietnam
|
CX1200-0510
|
Expansion module for additional mass storage, Compact Flash interface
– Compact Flash slot for type I + II cards
– LED status indicator for PWR (power),
LOCK (card inserted) and CF (access)
– protection class: IP 20
– operating/storage temperature: 0 °C … +55 °C/-25 °C … +85 °C
– weight: approx. 86 g (without CF card)
– dimensions (W x H x D): 19 x 100 x 51 mm
|
Beckhoff Vietnam
|
CX1500-B310
|
Profibus Slave Interface Module
ISA address: E4000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Profibus DP, DP-V1, DP-V2 (MC)
- Communication speed: 9,6 kBaud - 12 MBaud
- Max. process image: 244 Bytes In/244 Bytes Out
- 2 Kbyte internal DPRAM memory for process image
- Connection to CX through 16 Bit ISA Bus (PC104)
- Labeling system: snap-in white-coloured labels 5x15mm
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B310-0001
|
Profibus Slave Interface Module
ISA address: D4000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Profibus DP, DP-V1, DP-V2 (MC)
- Communication speed: 9,6 kBaud - 12 MBaud
- Max. process image: 244 Bytes In/244 Bytes Out
- 2 Kbyte internal DPRAM memory for process image
- Connection to CX through 16 Bit ISA Bus (PC104)
- Labeling system: snap-in white-coloured labels 5x15mm
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B310-0002
|
Profibus Slave Interface Module
ISA address D6000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Profibus DP, DP-V1, DP-V2 (MC)
- Communication speed: 9,6 kBaud - 12 MBaud
- Max. process image: 244 Bytes In/244 Bytes Out
- 2 Kbyte internal DPRAM memory for process image
- Connection to CX through 16 Bit ISA Bus (PC104)
- Labeling system: snap-in white-coloured labels 5x15mm
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B310-0003
|
Profibus Slave Interface Module
ISA address: D8000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Profibus DP, DP-V1, DP-V2 (MC)
- Communication speed: 9,6 kBaud - 12 MBaud
- Max. process image: 244 Bytes In/244 Bytes Out
- 2 Kbyte internal DPRAM memory for process image
- Connection to CX through 16 Bit ISA Bus (PC104)
- Labeling system: snap-in white-coloured labels 5x15mm
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B310-0004
|
Profibus Slave Interface Module
ISA address: DA000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Profibus DP, DP-V1, DP-V2 (MC)
- Communication speed: 9,6 kBaud - 12 MBaud
- Max. process image: 244 Bytes In/244 Bytes Out
- 2 Kbyte internal DPRAM memory for process image
- Connection to CX through 16 Bit ISA Bus (PC104)
- Labeling system: snap-in white-coloured labels 5x15mm
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B310-0005
|
Profibus Slave Interface Module
ISA address: DC000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Profibus DP, DP-V1, DP-V2 (MC)
- Communication speed: 9,6 kBaud - 12 MBaud
- Max. process image: 244 Bytes In/244 Bytes Out
- 2 Kbyte internal DPRAM memory for process image
- Connection to CX through 16 Bit ISA Bus (PC104)
- Labeling system: snap-in white-coloured labels 5x15mm
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B510
|
CANopen Slave Interface Module
IAS Address: E6000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Max. process image: 1536 Bytes for the sum of
inputs + outputs (max 192 PDOs)
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B510-0001
|
CANopen Slave Interface Module
ISA address: D4000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Max. process image: 1536 Bytes for the sum of
inputs + outputs (max 192 PDOs)
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B510-0002
|
CANopen Slave Interface Module
ISA address: D6000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Max. process image: 1536 Bytes for the sum of
inputs + outputs (max 192 PDOs)
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B510-0004
|
CANopen Slave Interface Module
ISA address: DA000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Max. process image: 1536 Bytes for the sum of
inputs + outputs (max 192 PDOs)
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B520
|
DeviceNet Slave Interface Module
ISA address: E8000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Max. process image: 255 Bytes In / 255 Byte Out
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B520-0001
|
DeviceNet Slave Interface Module
ISA address: D4000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Max. process image: 255 Bytes In / 255 Byte Out
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B520-0002
|
DeviceNet Slave Interface Module
ISA address: D6000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Max. process image: 255 Bytes In / 255 Byte Out
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B520-0003
|
DeviceNet Slave Interface Module
ISA address: D8000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Max. process image: 255 Bytes In / 255 Byte Out
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B520-0004
|
DeviceNet Slave Interface Module
ISA address: DA000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Max. process image: 255 Bytes In / 255 Byte Out
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-B520-0005
|
DeviceNet Slave Interface Module
ISA address: DC000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Max. process image: 255 Bytes In / 255 Byte Out
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M200
|
Lightbus Master Interface Module
ISA address: DA000
- Number of fieldbus channels 1
- Connector type: 2 x fiber optic connectors
- Communication speed: 2,5 MBaud
- Interface to the CX CPU through 16 Bit ISA
Interface with 2 kBytes DPRAM for 8 communication channels,
data, control and status register
- Communication 8 priority controlled logical communication channels
- Bus nodes max. 255 nodes with a max. of
65280 I/O points per fieldbus connection
- Interrupt initiation of 2 PC hardware interrupts is possible
- Hardware diagnostics 2 LEDs
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M200-0001
|
Lightbus Master Interface Module
ISA address: D4000
- Number of fieldbus channels 1
- Connector type: 2 x fiber optic connectors
- Communication speed: 2,5 MBaud
- Interface to the CX CPU through 16 Bit ISA
Interface with 2 kBytes DPRAM for 8 communication channels,
data, control and status register
- Communication 8 priority controlled logical communication channels
- Bus nodes max. 255 nodes with a max. of
65280 I/O points per fieldbus connection
- Interrupt initiation of 2 PC hardware interrupts is possible
- Hardware diagnostics 2 LEDs
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M200-0004
|
Lightbus Master Interface Module
ISA address: DA000
- Number of fieldbus channels 1
- Connector type: 2 x fiber optic connectors
- Communication speed: 2,5 MBaud
- Interface to the CX CPU through 16 Bit ISA
Interface with 2 kBytes DPRAM for 8 communication channels,
data, control and status register
- Communication 8 priority controlled logical communication channels
- Bus nodes max. 255 nodes with a max. of
65280 I/O points per fieldbus connection
- Interrupt initiation of 2 PC hardware interrupts is possible
- Hardware diagnostics 2 LEDs
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M200-0005
|
Lightbus Master Interface Module
ISA address: DC000
- Number of fieldbus channels 1
- Connector type: 2 x fiber optic connectors
- Communication speed: 2,5 MBaud
- Interface to the CX CPU through 16 Bit ISA
Interface with 2 kBytes DPRAM for 8 communication channels,
data, control and status register
- Communication 8 priority controlled logical communication channels
- Bus nodes max. 255 nodes with a max. of
65280 I/O points per fieldbus connection
- Interrupt initiation of 2 PC hardware interrupts is possible
- Hardware diagnostics 2 LEDs
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M310
|
Profibus Master Interface Module
ISA address: D4000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Supports Profibus DP (standard), Profibus DP-V1
(Cl. 1+2: acyclic services, alarms), DP-V2
- Transmission rate 9.6 kBaud-12 MBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 125 slaves with up to 244 Bytes input,
output, parameter, configuration, diagnostic data per slave
- Cycle times differing DP cycle times per slave are
possible using the CDL concept
- Hardware diagnostics 3 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M310-0002
|
Profibus Master Interface Module
ISA address: D6000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Supports Profibus DP (standard), Profibus DP-V1
(Cl. 1+2: acyclic services, alarms), DP-V2
- Transmission rate 9.6 kBaud-12 MBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 125 slaves with up to
244 Bytes input, output, parameter, configuration,
diagnostic data per slave
- Cycle times differing DP cycle times per slave are
possible using the CDL concept
- Hardware diagnostics 3 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M310-0003
|
Profibus Master Interface Module
IAS address: D8000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Supports Profibus DP (standard), Profibus DP-V1
(Cl. 1+2: acyclic services, alarms), DP-V2
- Transmission rate 9.6 kBaud-12 MBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 125 slaves with up to
244 Bytes input, output, parameter, configuration,
diagnostic data per slave
- Cycle times differing DP cycle times per slave are
possible using the CDL concept
- Hardware diagnostics 3 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M310-0004
|
Profibus Master Interface Module
ISA address: DA000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Supports Profibus DP (standard), Profibus DP-V1
(Cl. 1+2: acyclic services, alarms), DP-V2
- Transmission rate 9.6 kBaud-12 MBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 125 slaves with up to
244 Bytes input, output, parameter, configuration,
diagnostic data per slave
- Cycle times differing DP cycle times per slave are
possible using the CDL concept
- Hardware diagnostics 3 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M310-0005
|
Profibus Master Interface Module
ISA address: DC000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Supports Profibus DP (standard), Profibus DP-V1
(Cl. 1+2: acyclic services, alarms), DP-V2
- Transmission rate 9.6 kBaud-12 MBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 125 slaves with up to
244 Bytes input, output, parameter, configuration,
diagnostic data per slave
- Cycle times differing DP cycle times per slave are
possible using the CDL concept
- Hardware diagnostics 3 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M310-1001
|
Profibus Master Interface Module with new address (B750)
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Supports Profibus DP (standard), Profibus DP-V1
(Cl. 1+2: acyclic services, alarms), DP-V2
- Transmission rate 9.6 kBaud-12 MBaud
- Interface to the CX1000 Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 125 slaves with up to
244 Bytes input, output, parameter, configuration,
diagnostic data per slave
- Cycle times differing DP cycle times per slave are
possible using the CDL concept
- Hardware diagnostics 3 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M310-1003
|
Profibus Master Interface Module
special firmware CXM310-V0266-D01.h31
ISA address: D4000
- Number of fieldbus channels: 1
- Connector type: 9-pin D-Sub, female
- Supports Profibus DP (standard), Profibus DP-V1
(Cl. 1+2: acyclic services, alarms), DP-V2
- Transmission rate 9.6 kBaud-12 MBaud
- Interface to the CX1000 Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 125 slaves with up to
244 Bytes input, output, parameter, configuration,
diagnostic data per slave
- Cycle times differing DP cycle times per slave are
possible using the CDL concept
- Hardware diagnostics 3 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M510
|
CANopen Master Interface Module
ISA address: D6000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M510-0001
|
CANopen Master Interface Module
ISA address: D4000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M510-0002
|
CANopen Master Interface Module
ISA address: D6000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M510-0003
|
CANopen Master Interface Module
ISA address: D8000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M510-0004
|
CANopen Master Interface Module
ISA address: DA000
- Number of fieldbus channels: 1
- CAN bus interface 9-pin D-sub connector according to
CANopen specification, interface galvanically isolated
- Transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kBaud
- Interface to the CX CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 127 slaves
- Termination resistor switchable
- Hardware diagnostics 4 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M520
|
DeviceNet Master Interface Module
ISA address: D8000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Interface to the CX Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 63 slaves
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M520-0001
|
DeviceNet Master Interface Module
ISA address: D4000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Interface to the CX Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 63 slaves
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M520-0002
|
DeviceNet Master Interface Module
ISA address: D6000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Interface to the CX Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 63 slaves
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M520-0003
|
DeviceNet Master Interface Module
ISA address: D8000
- Number of fieldbus channels: 1
- Open Style Connector (5 wires)
- Transmission rate 125, 250, 500 kBaud
- Interface to the CX Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Bus nodes per channel: max. 63 slaves
- Termination resistor switchable
- Hardware diagnostics 2 LEDs per channel
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M750
|
SERCOS Master Interface Module
ISA address: DC000
- Number of fieldbus channels: 1
- Bus connectors: following standard F-SMA-Norm IEC 872-2
- Transmission rate 2, 4, 8, 16 MBaud
- Bus nodes per channel: max. 254
- Maximum number of communication Bytes: 508 Byte
in / 508 Byte out for cyclic data per slave
- Minimum communication cycle possible: 62,5 µs
- Hardware diagnostics: 3 LED
- Interface to the CX Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Protection class IP 20
- Operating /storage temperature: 0 ° ... +55° C/ -25 °C ... +85 °C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M750-0001
|
SERCOS Master Interface Module
ISA address: D4000
- Number of fieldbus channels: 1
- Bus connectors: following standard F-SMA-Norm IEC 872-2
- Transmission rate 2, 4, 8, 16 MBaud
- Bus nodes per channel: max. 254
- Maximum number of communication Bytes: 508 Byte
in / 508 Byte out for cyclic data per slave
- Minimum communication cycle possible: 62,5 µs
- Hardware diagnostics: 3 LED
- Interface to the CX Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M750-0002
|
SERCOS Master Interface Module
ISA address: D6000
- Number of fieldbus channels: 1
- Bus connectors: following standard F-SMA-Norm IEC 872-2
- Transmission rate 2, 4, 8, 16 MBaud
- Bus nodes per channel: max. 254
- Maximum number of communication Bytes: 508 Byte
in / 508 Byte out for cyclic data per slave
- Minimum communication cycle possible: 62,5 µs
- Hardware diagnostics: 3 LED
- Interface to the CX Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1500-M750-0005
|
SERCOS Master Interface Module
ISA address: DC000
- Number of fieldbus channels: 1
- Bus connectors: following standard F-SMA-Norm IEC 872-2
- Transmission rate 2, 4, 8, 16 MBaud
- Bus nodes per channel: max. 254
- Maximum number of communication Bytes: 508 Byte
in / 508 Byte out for cyclic data per slave
- Minimum communication cycle possible: 62,5 µs
- Hardware diagnostics: 3 LED
- Interface to the CX Core CPU through 16 Bit ISA
interface with 2 kBytes DPRAM
- Protection class IP 20
- Operating temperature 0° ... + 55° C
- Weight approx. 130 g
- Dimensions (W x H x D):
38 x 100 x 91 mm (1,5" x 3,94" x 3,58")
|
Beckhoff Vietnam
|
CX1800-0001-0001
|
Update from Zenon CE RT5.50 to RT6,
- Manufacturer: Copa-Data, Salzburg, Austria
- Price is for one runtime only.
The Licence agreements for Beckhoff software products apply.
|
Beckhoff Vietnam
|
CX1800-0003
|
QVis CE Runtime
Runtime for QVis CE Scada Software, preinstalled on CE device
- Manufacturer: Hilscher Swiss, Swiss
- Price is for one runtime only, SCADA editor not included
The licence agreements for Beckhoff software products apply.
|
Beckhoff Vietnam
|
CX1800-0100
|
Windows CE.NET Low Footprint (LF) Image
Default image, if no special CX1000 image specification was ordered
- Features: ATL, MFC, XML DOM, COM, COM Storage, Winsock, TCP/IP, RAS,
HTTP, ASP, FTP
- USB Host support for printer, storage, HID, touch, S-keys
|
Beckhoff Vietnam
|
CX1800-0100-0002
|
Windows CE.NET Low Footprint (LF) Image
Default image, if no special CX1020 image specification was ordered
|
Beckhoff Vietnam
|
CX1800-0100-0003
|
Windows CE.NET Low Footprint (LF) Image
Default image, if no special CX900 image specification was ordered
-Features: ATL, MFC, XML DOM, COM, COM Storage, Winsock, TCP/IP,
HTTP, ASP, FTP, SNTP
-USB Host support for printer, storage, HID, touch, S-keys
|
Beckhoff Vietnam
|
CX1800-0100-0004
|
Windows CE.NET Low Footprint (LF) Image
Default image, if no special CX1010 image specification was ordered
|
Beckhoff Vietnam
|
CX1800-0101
|
Windows CE.NET HMI Image
Default image, if CX1000 is ordered with a SCADA runtime licence
- image for building .NET applications on CX1000
- includes all features of CX1800-0100
- includes UPnP Control Point amd Device Host, SOAP Client/Server,
DCOM, IE6.x, RDP Client, Media Player, Print Server
- includes the Microsoft .NET compact framework
- requires CX1001-xxxx (large memory CPU)
|
Beckhoff Vietnam
|
CX1800-0101-0002
|
Windows CE.NET HMI Image
Default image, if CX1020 is ordered with a SCADA runtime licence
- image for building .NET applications on CX1020
- includes all features of CX1800-0100-0002
- includes UPnP Control Point and Device Host, SOAP Client/Server,
DCOM IE6.x, RDP Client, Media Player, Print Server
- includes the Microsoft .NET compact framework
|
Beckhoff Vietnam
|
CX1800-0101-0003
|
Windows CE.NET HMI Image
Default image, if CX9000 is ordered with a SCADA runtime licence
-image for building .NET applications on CX9000
-includes all features of CX1800-0100-0003
-includes UPnP Control Point and Device Host, SOAP Client/Server, DCOM
IE6.x, RDP Client, Media Player, Print Server
-includes the Microsoft .NET compact framework
-requires large memory CPU
|
Beckhoff Vietnam
|
CX1800-0101-0004
|
Windows CE.NET HMI Image
Default image, if CX1010 is ordered with a SCADA runtime licence
-image for building .NET applications on CX1010
-includes all features of CX1800-0100-0004
-includes UPnP Control Point and Device Host, SOAP Client/Server, DCOM
IE6.x, RDP Client, Media Player, Print Server, RAS Server
-includes the Microsoft .NET compact framework
|
Beckhoff Vietnam
|
CX1800-0101-0005
|
Windows CE.NET HMI Image
Default image, if CX1030 is ordered with a SCADA runtime licence
-image for building .NET applications on CX1030
-includes all features of CX1800-0100-0005
-includes UPnP Control Point and Device Host, SOAP Client/Server, DCOM
IE6.x, RDP Client, Media Player, Print Server
-includes the Microsoft .NET compact framework
|
Beckhoff Vietnam
|
CX1800-0101-0006
|
Windows CE.NET HMI Image
Default image, if CX9010 is ordered with a SCADA runtime licence
-image for building .NET applications on CX9010
-includes all features of CX1800-0100
-includes UPnP Control Point and Device Host, SOAP Client/Server, DCOM
IE6.x, RDP Client, Media Player, Print Server
-includes the Microsoft .NET compact framework
|
Beckhoff Vietnam
|
CX1800-0103
|
Windows CE Image with .NET Compact Framework
- Image for all building .NET applications on CX1000
- Includes all features of CX1800-0101
- Includes Microsoft Viewer: PDF, Excel, Word, PowerPoint.
- Requires CX1001-xxx (large memory CPU)
|
Beckhoff Vietnam
|
CX1800-0200
|
Windows XP Embedded 128 MB Image
- Default XPE Image if CX1000 is ordered with a 128 MB Compact Flash
card
- Requires CX1001-xxxx (large memory CPU)
|
Beckhoff Vietnam
|
CX1800-0202
|
Windows XP Embedded 1GB Image
-Default XPE Image if CX1000 is ordered with a 1 GB
Compact Flash card
-Requires CX1001-xxxx (large memory CPU)
|
Beckhoff Vietnam
|
CX1800-0202-0002
|
Windows XP Embedded 1 GB Image, english/german
-Default XPE Image if CX1020 is ordered with 1 GB
Compact Flash card
|
Beckhoff Vietnam
|
CX1800-0202-0004
|
Windows XP Embedded .NET Image
-Default XPE Image for CX1010
|
Beckhoff Vietnam
|
CX1800-0202-0005
|
Windows XP Embedded .NET Image
-Default XPE Image for CX1030
|
Beckhoff Vietnam
|
CX1800-0401
|
Windows Embedded Standard 7 P instead Windows XPe
Requires min. 1GB RAM and 8GB Compact Flash
Supported Devices: CX5020
|
Beckhoff Vietnam
|
CX1800-1002
|
CX1800-1002 customized CE image
|
Beckhoff Vietnam
|
CX1800-1004
|
Hauni CE Image CX1800-1004
|
Beckhoff Vietnam
|
CX1800-1005
|
CX1800-1005 customized CE image
|
Beckhoff Vietnam
|
CX1800-1007
|
CX1800-1007 customized CE image für Conti Teves
|
Beckhoff Vietnam
|
CX1800-1008-0002
|
custumer specific CE image
Zenon NET CE Runtime
Runtime for the Zenon .NET CE Scada Software, until V6.20,
preinstalled on CE device
- Manufacturer: Copa-Data, Salzburg, Austria
- Price is for one runtime only.
The licence agreements for Beckhoff software products apply.
|
Beckhoff Vietnam
|
CX1800-1012
|
Custom Windows CE.NET 5.0 Image for CX1020-0112 CPU
and CX1900-0023 CF Card
Addition of 3M Touch Driver
|
Beckhoff Vietnam
|
CX1800-1015
|
CX1800-1015 customized CE LF image for CX9000-0001
|
Beckhoff Vietnam
|
CX1800-1016
|
CX1800-1016 customized CE image for Philips.
|
Beckhoff Vietnam
|
CX1800-1019
|
customized image Icon
CX9000 with Windows Embedded CE Professional
|
Beckhoff Vietnam
|
CX1800-1023
|
customized image FKI Logistex/IBT
CX9000-1001 with Windows Embedded CE Core
TwinCAT-Ethernet/UO-Slave-CE pre-installed
|
Beckhoff Vietnam
|
CX1800-1025
|
customized image Homag
CX9001 with Windows Embedded CE Prof and customized settings
|
Beckhoff Vietnam
|
CX1800-1027
|
customized CE5 image Huaheng
CP6619
|
Beckhoff Vietnam
|
CX1800-1029-0001
|
Windows CE6 image with one license for one PC,
type CP6219-1000-0020, english
|
Beckhoff Vietnam
|
CX1800-1029-0002
|
Windows CE6 image with one license for one PC,
type CP6202-1026-0035, english
|
Beckhoff Vietnam
|
CX1800-1029-0003
|
Windows CE7 image with one license for one PC,
type CP6702-1028-0040, english
|
Beckhoff Vietnam
|
CX1800-1029-0004
|
Windows CE7 image with one license for one PC,
type CP6702-0001-0050, english
|
Beckhoff Vietnam
|
CX1800-1033
|
CX9000 with CE 6.0 Core
|
Beckhoff Vietnam
|
CX1800-1034-0000
|
CX9001/9010 with CE 6.0 Professional
TwinCAT 2.10
|
Beckhoff Vietnam
|
CX1800-1034-0001
|
CX9001/9010 with CE 6.0 Professional
TwinCAT 2.11 R3
|
Beckhoff Vietnam
|
CX1800-1039
|
Customer specific Windows CE 5 Image for CX9001, CreditSwiss
TwinCAT PLC-HMI-Web-CE inluded
|
Beckhoff Vietnam
|
CX1800-1044
|
CX1800-1044 BACnet Image
Contains:
TwinCAT 2.11 R3 PLC Level
TwinCAT BACnet/IP Supplement Revison 6
|
Beckhoff Vietnam
|
CX1800-1045
|
Windows XP embedded image with one license for one PC,multilanguage,
german, englisch, type Prüftechnik CX1020-0121 with CX1900-0023
|
Beckhoff Vietnam
|
CX1800-1046
|
Customer specific CE6.0 image, company Grundfos LifeLink
|
Beckhoff Vietnam
|
CX1800-1047
|
Customer specific CE image, company Intec
CX5010
TwinCAT-Profinet-IO-Device-CE
|
Beckhoff Vietnam
|
CX1800-1048
|
Customer specific CE image, company Nagel
CP7732-1207-0030 / CP7732-1210-0030
|
Beckhoff Vietnam
|
CX1800-1050
|
Customer-specific CE5 Image, Company Horiba
- Windows CE 5 Image HPS 2.26a für CP6607-0001-0000
- TwinCAT 2.10 / TC CE Build 312 / Build 1342
- C9900-S701
- TwinCAT-PLC-HMI-CE
|
Beckhoff Vietnam
|
CX1800-1051
|
Customer-specific CE6 Image, Company Atlas Copco
CP7709-1021-0020
|
Beckhoff Vietnam
|
CX1800-1052
|
CX1800-1052 BACnet/IP Image
Contains:
TwinCAT 2.11 R3 PLC Level
TwinCAT BACnet/IP Supplement Revison 12
|
Beckhoff Vietnam
|
CX1800-1052-0001
|
CX1800-1052-0001 BACnet/IP Image
Contains:
TwinCAT 2.11 R3 PLC Level
TwinCAT BACnet/IP Supplement Revision 12 - Extended Features
|
Beckhoff Vietnam
|
CX1800-1054
|
Customer-specific CE6.0 Image, Company Marquardt Switches Inc
CX1010
TwinCAT 2.11
|
Beckhoff Vietnam
|
CX1800-1058
|
CX1800-1058 customized CE Image for co. Trumpf
|
Beckhoff Vietnam
|
CX1800-1059
|
CX1800-1059 customized CE6 Image co. Regio IT Aachen
- Windows CE6 Image for CX8090
- TwinCAT 3.1 Bundle *TC1200-0000-0005*
- TC1200-0020 TC3 PLC
- TF6100-0020 TC3 OPC-UA
|
Beckhoff Vietnam
|
CX1800-1060-0001
|
Customer specific CE Image, C6920-0030 with CE6 and TC2.11 Build 2228
TS6250-0030 TwinCAT-Modbus-TCP-Server-CE
TS1800-0030 TwinCAT-PLC-HMI-CE
TS6220 TwinCAT-EtherCAT-Redundancy-250
|
Beckhoff Vietnam
|
CX1800-1061
|
Customer spec. CE Image, ASM
Windows Embedded CE6 Core image with one license for one PC,
Type CX5020 with TwinCAT3 PLC, english
|
Beckhoff Vietnam
|
CX1800-1062
|
WEC7 Image, Firma Ecolab
CP6607-1009-0020 with TexFAT support
|
Beckhoff Vietnam
|
CX1800-1063
|
WEC7 Image, company MEMCO, CP6606-0001-0020
|
Beckhoff Vietnam
|
CX1800-1064
|
WEC7 Image, Company Adwen, CX9020
|
Beckhoff Vietnam
|
CX1800-1065
|
WEC7 Image: CX9020_CB3011_WEC7_HPS_v608g_TC31_B4024.10
Company: IOTA
Machine:Spectre Green
Installed Software:
TwinCAT 3.1 - 4024.10
SSH Server v1.0.0.6
TF6421-XML-Server V3.1.26.0
TF6310 TCP-IP V3.1.9.0
TF1810 PLC-HMI V1.0.0
TF1810 PLC-HMI Web V1.7.3.0
TF6300 FTP-Client V3.0.5.0
|
Beckhoff Vietnam
|
CX1800-1066
|
WEC7 Image, Company IOTA
CX9020
Sauron v1.1.0
TC3.1 4018.16
TF6421-0030
TF6310-0030
TF1810-0030
|
Beckhoff Vietnam
|
CX1800-1067
|
WEC7 Image, Customer Suncore Photovoltaic
CX9020
TC2.11 2254
|
Beckhoff Vietnam
|
CX1800-1068
|
WEC7 Image, Customer Tetra Pak
CX9020
TC3 fixed Version
|
Beckhoff Vietnam
|
CX1800-1070
|
WEC7 Image, Company AMAT
CX9020
TC3
TF6340-0030
TF6255-0030
|
Beckhoff Vietnam
|
CX1800-1071
|
WEC7 Image, Company AMAT
CX9020
TC3
|
Beckhoff Vietnam
|
CX1800-1072
|
WEC7 Image, Company IOTA
CX9020
TwinCAT 3.1 - 4020.10
TF6421 TC3 XML Server
TF6310 TC3 TCP/IP
TF1800 TC3 PLC HMI
TF1810 TC3 PLC HMI Web
|
Beckhoff Vietnam
|
CX1800-1073
|
WEC7 Image, Customer IOTA | HomerCal
CX9020
TwinCAT 3.1 - 4020.10
TC1200-0030 TC3 PLC
TF6421-0030 TC3 XML Server
TF6310-0030 TC3 TCP/IP
TF1800-0030 TC3 PLC HMI
TF1810-0030 TC3 PLC HMI Web
TF5000-0030 TC3 NCPTP
|
Beckhoff Vietnam
|
CX1800-1074
|
WEC7 Image, Customer IOTA | HomerTest200
CX9020
TwinCAT 3.1 - 4020.10
TC1200-0030 TC3 PLC
TF6421-0030 TC3 XML Server
TF6310-0030 TC3 TCP/IP
TF1800-0030 TC3 PLC HMI
TF1810-0030 TC3 PLC HMI Web
|
Beckhoff Vietnam
|
CX1800-1075
|
WEC7 Image, Customer IOTA | HomerTest600
CX9020
TwinCAT 3.1 - 4020.10
TC1200-0030 TC3 PLC
TF6421-0030 TC3 XML Server
TF6310-0030 TC3 TCP/IP
TF1800-0030 TC3 PLC HMI
TF1810-0030 TC3 PLC HMI Web
|
Beckhoff Vietnam
|
CX1800-1076
|
WEC7 Image, Customer IOTA | Miyagi-1up
CX9020
TwinCAT 3.1 - 4020.10
TC1200-0030 TC3 PLC
TF6421-0030 TC3 XML Server
TF6310-0030 TC3 TCP/IP
TF1800-0030 TC3 PLC HMI
TF1810-0030 TC3 PLC HMI Web
TF5000-0030 TC3 NCPTP
|
Beckhoff Vietnam
|
CX1800-1077
|
WEC7 Image, Customer IOTA | FMUST
CX9020
TwinCAT 3.1 - 4020.10
TC1200-0030 TC3 PLC
TF6421-0030 TC3 XML Server
TF6310-0030 TC3 TCP/IP
TF1800-0030 TC3 PLC HMI
TF1810-0030 TC3 PLC HMI Web
TF5000-0030 TC3 NCPTP
|
Beckhoff Vietnam
|
CX1800-1078
|
WEC7 Image, Customer IOTA | FMUST
CX9020
TwinCAT 3.1 - 4020.10
TC1200-0030 TC3 PLC
TF6421-0030 TC3 XML Server
TF6310-0030 TC3 TCP/IP
TF1800-0030 TC3 PLC HMI
TF1810-0030 TC3 PLC HMI Web
TF5000-0030 TC3 NCPTP
|
Beckhoff Vietnam
|
CX1800-1079
|
WEC7 Image, Kunde Dell | Energy Labs
C6915-0010
CBxx63_WEC7_HPS_v502j_TC211R3_B2258 mit TC 2.11 R3
TwinCAT 22.11 Build 2258
TS6250-0005-0030 TC3 Modbus Server
TS6220-0005 EtherCAT Redundancy
TS1800-0005-0030 TC3 PLC HMI CE
TS6255-0005 TC3 PLC Modbus RTU
|
Beckhoff Vietnam
|
CX1800-1080
|
WEC7 Image, Customer IOTA
CX8090
TwinCAT 2.11 - R3 Build 2254
TX1200-0005 PLC
TS6421-0005-0030 CE-XML-Server
TS6310-0005-0030 CE_TCP-IP
TS1800-0005-0030 PLC-HMI
|
Beckhoff Vietnam
|
CX1800-1081
|
WEC7 Image, Customer Viessmann
CX9020
|
Beckhoff Vietnam
|
CX1800-1082
|
WEC7 Image, Customer Trumpf
CX9020
|
Beckhoff Vietnam
|
CX1800-1083
|
WEC7 Image, Customer Leutenegger & Frei AG
CP6606-0001-0020
TC1200-0030 TC3 PLC Runtime
TF1800-0030 TC3 PLC HMI
|
Beckhoff Vietnam
|
CX1800-1086
|
WEC7 Image, Customer IOTA
CX9020
Project: Myagi Helium
- TF6421
- TF6310
- TF1810
|
Beckhoff Vietnam
|
CX1800-1087
|
WEC7 Image, Customer Intec Eisenmann
TwinCAT 3 Build 4020.32
|
Beckhoff Vietnam
|
CX1800-1088
|
WEC7 Image, Customer Baker Hughes
IPC: CX9020-0110
|
Beckhoff Vietnam
|
CX1800-1089
|
Customer specific WEC7 Image, Company Dell
Device: CX5120
TC Version: 3.1.4020.2
Changes:
TC1200-0040 TC3 PLC
TF1800-0040 TC3 PLC HMI
TF6250-0040 TC3 Modbus TCP
TF6255-0040 TC3 Modbus RTU
TF6220-0040 TC3 EtherCAT Redundancy 250
|
Beckhoff Vietnam
|
CX1800-1090
|
Customer specific WEC7 Image, Company IOTA
Device: CX5120
Image: WEC7
Changes:
Based on CX5120_CBxx63_WEC7_HPS_v604d_TC31_B4022.4
|
Beckhoff Vietnam
|
CX1800-1091
|
Customer specific CE Image, company DELL
C9900-H504 2 GB CF card instead of 128 MB
C9900-S701 TwinCAT PLC run-time for Windows CE
FC9151-0000 Ethernet PCI interface card, Mini PCI i
TS8020-0001 TwinCAT BACnet/IP
TS6220-0001 TwinCAT EtherCAT Redundancy 250
TS6250-0001-0030 TwinCAT Modbus TCP Server CE
TS1800-0005-0030 TwinCAT PLC HMI CE
Requirement: TC2 2.11 Build 2257
|
Beckhoff Vietnam
|
CX1800-1092
|
Customer specific WEC7 Image, company Viessmann Werke GmbH & Co. KG
Device: CX9020
Image: WEC7
TwinCAT: 2.11.2249
Extra: CX9020-0111-1005 - Vitocontrol 100-M without BACnet
|
Beckhoff Vietnam
|
CX1800-1093
|
Customer specific WEC7 Image, company Viessmann Werke GmbH & Co. KG
Device: CX9020
Image: WEC7
TwinCAT: 2.11.2249
Extra: CX9020-0111-1005 - Vitocontrol 200-M without BACnet
|
Beckhoff Vietnam
|
CX1800-1094
|
Customer specific WEC7 Image, company Viessmann Werke GmbH & Co. KG
Device: CX9020
Image: WEC7
TwinCAT: 2.11.2249
Extra: CX9020-0111-1006 - Vitocontrol 100-M with BACnet
|
Beckhoff Vietnam
|
CX1800-1095
|
Customer specific WEC7 Image, company Viessmann Werke GmbH & Co. KG
Device: CX9020
Image: WEC7
TwinCAT: 2.11.2249
Extra: CX9020-0111-1006 - Vitocontrol 200-M with BACnet
|
Beckhoff Vietnam
|
CX1800-1096
|
Customer specific WEC7 Image, company Daegunsoft (TriTek)
Device: CX9020
Image: WEC7
TwinCAT: 3.1.4022.20
Extra: Added driver for a 3rd party monitor
|
Beckhoff Vietnam
|
CX1800-1101
|
Customer specific WEC7 Image, company Viessmann
Device: CX8091
Image: WEC7
TwinCAT: TC3
Particularities:
- image changed by customer
|
Beckhoff Vietnam
|
CX1800-2001
|
CX1800-2001 customized XPE image
|
Beckhoff Vietnam
|
CX1800-2002
|
CX1800-2002 customized XPE image
|
Beckhoff Vietnam
|
CX1800-2011
|
CX1800-2011 customized CX1020 XPE image Bruderer
|
Beckhoff Vietnam
|
CX1800-2012
|
customized CX1020 XPE Image, Company SieMatic
|
Beckhoff Vietnam
|
CX1800-2014
|
customized CX1010 XPe Image, Rotox
|
Beckhoff Vietnam
|
CX1800-2016
|
Windows Embedded Standard 2009 with one license for one embedded pc,
type Fette, CX1020
|
Beckhoff Vietnam
|
CX1800-2024
|
Customer specific WES2009 Image for a CX1030, Company Odevis
TX1270 | TwinCAT-CNC
TS5220 | TwinCAT-CNC-Axes-Pack
TS5240 | TwinCAT-CNC-Transformation
TS6310 | TwinCAT-TCP/IP-Server
TS5230 | TwinCAT-CNC-Channel-Pack
TwinCAT 2.10 Build 1340
TwinCAT CNC 2.10 Build 1503.08 (Patch)
|
Beckhoff Vietnam
|
CX1800-2027
|
CX1800-2027 customized CX20x0 WES7 Hauni
|
Beckhoff Vietnam
|
CX1800-2028
|
CX1800-2028 customized CX50x0 WES2009 Image Rathgeber
|
Beckhoff Vietnam
|
CX1800-2029
|
Customer specific WES7 Image, Company IOTA
IOTA Deadweight 3 Axis
CX20x0 WES7 Image 32 Bit
Based on CX1800-411-0009 v3.88
|
Beckhoff Vietnam
|
CX1800-2031
|
Customer specific WES7 Image, Company IOTA
IOTA Deadweight 17 Axis
CX20x0 WES7 Image 32 Bit
Based on CX1800-411-0009 v3.88
|
Beckhoff Vietnam
|
CX1800-2032
|
Customer specific WES7 Image, Company IOTA
CX20x0
|
Beckhoff Vietnam
|
CX1800-2033
|
Customer specific WES7 Image, Company IOTA
Project: Valhalla RearCam
|
Beckhoff Vietnam
|
CX1800-2034
|
Customer specific WES7 Image, Company IOTA
Project: Valhalla FrontCam
|
Beckhoff Vietnam
|
CX1800-2035
|
Customer specific WES7 Image, Company Sewtec
TC2 for CX20x0
|
Beckhoff Vietnam
|
CX1800-2036
|
CX1800-2036 customized WES7 Image LPKF SolarQuipment
|
Beckhoff Vietnam
|
CX1800-2037
|
Customer specific WES7-P 32Bit Image, Company Tetra Pak
TC3 Build 4018.26 for CX2040
|
Beckhoff Vietnam
|
CX1800-2039
|
Customer-specific WES7 64bit Image, Company Tetra Pak
CX20x0
TC3.1 4018.26
|
Beckhoff Vietnam
|
CX1800-2041
|
Customer-specific WES7 32bit Image, IOTA
Device: CX51x0
Image: WES7 32bit
TwinCAT: 3.1.4020.10
o TF6421-XML-Server V3.1.13.0
o TF6310-TCP-IP V3.1.3.0
|
Beckhoff Vietnam
|
CX1800-2043
|
CX1800-2043 customized WES7 64Bit Image Manz for CX51x0
|
Beckhoff Vietnam
|
CX1800-2044
|
CX1800-2044 customized WES7 64Bit Image Manz for CX20x0
|
Beckhoff Vietnam
|
CX1800-2046
|
Customer specific WES7 Image, Company Tetra Pak
Device: CX20x0
Image: WES7
TC Version: TwinCAT 3
|
Beckhoff Vietnam
|
CX1800-2047
|
Customer specific WES7 Image, Company Trimech Technology Pte Ltd
Device: CX51x0
Image: WES7
TC Version: TwinCAT 3
|
Beckhoff Vietnam
|
CX1800-2048
|
Customer specific WES7 Image, Company Glaston
Device: CX51x0
Image: WES7
TC Version: TwinCAT 2
|
Beckhoff Vietnam
|
CX1800-2049
|
Customer specific WES7 Image, Company Trimech Technology Pte Ltd.
Device: CX51x0
Image: WES7
TC Version: TwinCAT 3
|
Beckhoff Vietnam
|
CX1800-2050
|
Customer specific WES7 Image, Company Trimech Technology Pte Ltd.
Device: CX51x0
Image: WES7
TC Version: TwinCAT 3
|
Beckhoff Vietnam
|
CX1800-2051
|
Customer specific W10 Image, Company IOTA
Device: CX51x0
Image: W10
TC Version: TwinCAT 3
TF6421 installed
TF6310 installed
Changes: different language pack installed -> Chinese Simplified
|
Beckhoff Vietnam
|
CX1800-2052
|
Customer specific W10 Image, Company Nissei Plastic
Device: CX51x0
Image: W10 64bit
Changes: follow ...
|
Beckhoff Vietnam
|
CX1800-2053
|
Customer specific WES7 Image, Company Tetra Pak, Italy
Device: CX1800
Image: WES7 64bit
TC Version: TwinCAT 3
|
Beckhoff Vietnam
|
CX1800-2060
|
Customer specific W10 Image, Company Continental
Device: CX5130
OS: Windows 10 LTSC 2019 64 Bit
TC Version: 4024.4
|
Beckhoff Vietnam
|
CX1800-9001
|
Customer specific LINUX, company Syskron
Device: CX2040 + CX2072
OS: Linux
|
Beckhoff Vietnam
|
CX1831-0202-0002
|
Windows XP Embedded 1 GB Image in german language
-Default XPE Image if CX1020 is ordered with 1 GB Compact Flash card
|
Beckhoff Vietnam
|
CX1900-0022
|
128 MB Compact Flash card,
extended temperature specification
|
Beckhoff Vietnam
|
CX1900-0022-1001
|
Customer specific Compact-Flash-Karte - Hani
128 MB Compact Flash card,
extended temperature specification
with Hauni CE Image CX1800-1004-0005
packed in in antistatic box with additional label
|
Beckhoff Vietnam
|
CX1900-0023
|
1 GB Compact Flash card, extended temperature specification,
instead of 128 MB Compact Flash
|
Beckhoff Vietnam
|
CX1900-0023-0001
|
1 GB Compact Flash card, extended temperature specification
type 3500
|
Beckhoff Vietnam
|
CX1900-0024
|
1 GB Compact Flash card,
extended temperature specification
|
Beckhoff Vietnam
|
CX1900-0025
|
2 GB Compact Flash card,
extended temperature specification,
instead of 128 MB Compact Flash
|
Beckhoff Vietnam
|
CX1900-0026
|
2 GB Compact Flash card,
extended temperature specification
|
Beckhoff Vietnam
|
CX1900-0026-1001
|
Customer specific bundle
2-GB Compact Flash card,
formatted (bootable) NTFS
Constisting of:
CX1900-0026
(2-GB Compact Flash card, extended temperature specification)
CX1900-0012
(formatting a Compact Flash card (bootable), NTFS)
|
Beckhoff Vietnam
|
CX1900-0027
|
4 GB Compact Flash card,
extended temperature specification,
instead of 128 MB Compact Flash
|
Beckhoff Vietnam
|
CX1900-0028
|
4 GB Compact Flash card,
extended temperature specification
|
Beckhoff Vietnam
|
CX1900-0029
|
8 GB Compact Flash card,
extended temperature specification,
instead of 128 MB Compact Flash
|
Beckhoff Vietnam
|
CX1900-0029-1001
|
8 GB Compact Flash card, instead of 128 MB - 1 GB /
7 GB partitioned and FAT formatted
1 GB partition for Windows CE
7 GB partition for data
|
Beckhoff Vietnam
|
CX1900-0030
|
8 GB Compact Flash card,
extended temperature specification
|
Beckhoff Vietnam
|
CX1900-0030-1001
|
8 GB Compact Flash card - 1 GB / 7 GB partitioned and FAT formatted
1 GB Partition for Windows CE
7 GB Partition for Data
|
Beckhoff Vietnam
|
CX1900-0031
|
16 GB Compact Flash card,
extended temperature specification,
instead of 128 MB Compact Flash
|
Beckhoff Vietnam
|
CX1900-0032
|
16 GB Compact Flash card,
extended temperature specification
|
Beckhoff Vietnam
|
CX1900-0101
|
DVI-to-VGA passive adapter for connecting
a standard desktop VGA monitor to the CX system
- Singles out the VGA signals of the DVI-I interface
of the CX1000-N001 module
- DVI-A connector, 29-pin male (bottom) to
15-pin female connector (top)
- Weight approx. 40 g
- Dimensions (W x H x D):
40 x 42 x 15 mm (1,58" x 1,65" x 0,59")
|
Beckhoff Vietnam
|
CX1900-0102
|
Spare battery suitable for CX10x0, CX50x0, CX51x0, CX52x0, CX90x0,
CX20xx"
- lithium button cell type CR2032, 3V/225 mAh
- follow polarity when installing
|
Beckhoff Vietnam
|
CX1900-0103
|
Spare fan tray for CX1030
- tray consisting of chassis and 40 mm fan
- simple exchange in teh field due to wireless installation
- weight approx. 30 g
- dimensions: (W x H x D) 57 x 14 x 60 mm
|
Beckhoff Vietnam
|
CX1900-0106
|
USB cable bracket for CX50x0 (5 pieces)
|
Beckhoff Vietnam
|
CX1900-0120
|
CX1900-0120 Option "active cooling" for CX1020
Pre-assembling ex factory for active cooling,
to extend the installation positions.
Cooling is realized by a fan cartridge:
- cartridge consisting fof chassis and 40mm fan
- simple exchange in the field due to wireless installation
Note: Depending on the installation position, eventually a power
supply type CX1100-001x is needed.
|
Beckhoff Vietnam
|
CX1900-0122
|
512 MB microSD card
|
Beckhoff Vietnam
|
CX1900-0123
|
1 GB microSD card, instead of 512 MB microSD card
|
Beckhoff Vietnam
|
CX1900-0124
|
1 GB microSD card
|
Beckhoff Vietnam
|
CX1900-0125
|
2 GB microSD card, instead of 512 MB microSD card
|
Beckhoff Vietnam
|
CX1900-0126
|
2 GB microSD card
|
Beckhoff Vietnam
|
CX1900-0127
|
4 GB microSD card, instead of 512 MB microSD card
|
Beckhoff Vietnam
|
CX1900-0128
|
4 GB microSD card
|
Beckhoff Vietnam
|
CX1900-0129
|
8 GB microSD card, instead of 512 MB microSD card
|
Beckhoff Vietnam
|
CX1900-0130
|
8 GB microSD card
|
Beckhoff Vietnam
|
CX1900-0200
|
Universal Plastic Labels for the CX system
- snaps into the premoulded spots on the CX components
- labeling can be done with a X-Y plotter
- dimension of the single label 15 x 5 mm
- material: white coloured plastic
- Murrplastik Type KMR 5/15, Order number 86401014
|
Beckhoff Vietnam
|
CX1900-0201
|
Memory extension 512MB instead of 256MB for CX1020/CX1030
512MB SO-DIMM PC2700 (200pin DDR333) CL2.5
Pre-assembled in the factory
|
Beckhoff Vietnam
|
CX1900-0202
|
Memory extension 1 GB instead of 256 MB for CX1020/CX1030
1 GB SO-DIMM PC2700 (200pin DDR333) CL2.5
Preassembled in factory.
|
Beckhoff Vietnam
|
CX1900-0204
|
Memory extension 1 GB DDR2-RAM instead of 512 MB for CX5020.
Preassembled in factory.
|
Beckhoff Vietnam
|
CX1900-0320
|
Option "Zero Second Level Cache" for CX1020
Intel Celeron M 1,0 GHz, 0 kB L2-Cache
(Zero Second Level Cache) instead of Intel 1,0 GHz, 512 kB L2-Cache
|
Beckhoff Vietnam
|
CX2020-B110
|
Optional interface for CX2020
- EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
|
Beckhoff Vietnam
|
CX2020-B310
|
Optional interface for CX2020
- PROFIBUS slave interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2020-B510
|
Optional interface for CX2020
- CANopen slave interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2020-B930
|
Optional interface for CX2020
- PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
|
Beckhoff Vietnam
|
CX2020-B950
|
Optional interface for CX2020
- EtherNet/IP adapter interface, Ethernet (2 x RJ45 switched)
|
Beckhoff Vietnam
|
CX2020-M310
|
Optional interface for CX2020
- PROFIBUS master interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2020-M510
|
Optional interface for CX2020
- CANopen master interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2020-M930
|
Optional interface for CX2020
- PROFINET RT, controller interface, Ethernet (2 x RJ45)
|
Beckhoff Vietnam
|
CX2020-N010
|
Optional interface for CX2020
- DVI-D interface, additional DVI-D port for clone and
Extended Display Mode
|
Beckhoff Vietnam
|
CX2020-N011
|
Optional interface for CX2020
- DisplayPort interface, additional displayPort for clone and
Extended Display Mode
|
Beckhoff Vietnam
|
CX2020-N030
|
Optional interface for CX2020
- RS232 interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2020-N031
|
Optional interface for CX2020
- RS485 interface, D-sub socket, 9-pin
configuration as an end point, without echo, termination on
|
Beckhoff Vietnam
|
CX2020-N031-0001
|
Optional interface for CX2020
- RS485 interface, D-sub socket, 9-pin
configuration as an end point, with echo, termination on
|
Beckhoff Vietnam
|
CX2020-N031-0002
|
Optional interface for CX2020
- RS485 interface, D-sub socket, 9-pin
configuration as drop point, without echo, termination off
|
Beckhoff Vietnam
|
CX2020-N031-0003
|
Optional interface for CX2020
- RSRS485 interface, D-sub socket, 9-pin
configuration as drop point, with echo, termination off
|
Beckhoff Vietnam
|
CX2020-N031-0004
|
Optional interface for CX2020
- RS422 interface, D-sub socket, 9-pin
configuration as full duplex end point, termination on
|
Beckhoff Vietnam
|
CX2030-B110
|
Optional interface for CX2030
- EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
|
Beckhoff Vietnam
|
CX2030-B310
|
Optional interface for CX2030
- PROFIBUS slave interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2030-B510
|
Optional interface for CX2030
- CANopen slave interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2030-B930
|
Optional interface for CX2030
- PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
|
Beckhoff Vietnam
|
CX2030-M310
|
Optional interface for CX2030
- PROFIBUS master interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2030-M510
|
Optional interface for CX2030
- CANopen master interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2030-M930
|
Optional interface for CX2030
- PROFINET RT, controller interface, Ethernet (2 x RJ45)
|
Beckhoff Vietnam
|
CX2030-N010
|
Optional interface for CX2030
- DVI-D interface, additional DVI-D port for clone or
Extended Display Mode
|
Beckhoff Vietnam
|
CX2030-N011
|
Optional interface for CX2030
- DisplayPort interface, additional displayPort for clone or
Extended Display Mode
|
Beckhoff Vietnam
|
CX2030-N030
|
Optional interface for CX2030
- RS232 interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2030-N031
|
Optional interface for CX2030
- RS485 interface, D-sub socket, 9-pin
configuration as an end point, without echo, termination on
|
Beckhoff Vietnam
|
CX2030-N031-0001
|
Optional interface for CX2030
- RS485 interface, D-sub socket, 9-pin
configuration as an end point, with echo, termination on
|
Beckhoff Vietnam
|
CX2030-N031-0002
|
Optional interface for CX2030
- RS485 interface, D-sub socket, 9-pin
configuration as drop point, without echo, termination off
|
Beckhoff Vietnam
|
CX2030-N031-0003
|
Optional interface for CX2030
- RSRS485 interface, D-sub socket, 9-pin
configuration as drop point, with echo, termination off
|
Beckhoff Vietnam
|
CX2030-N031-0004
|
Optional interface for CX2030
- RS422 interface, D-sub socket, 9-pin
configuration as full duplex end point, termination on
|
Beckhoff Vietnam
|
CX2040-B110
|
Optional interface for CX2040
- EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
|
Beckhoff Vietnam
|
CX2040-B310
|
Optional interface for CX2040
- PROFIBUS slave interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2040-B510
|
Optional interface for CX2040
- CANopen slave interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2040-B930
|
Optional interface for CX2040
- PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
|
Beckhoff Vietnam
|
CX2040-M310
|
Optional interface for CX2040
- PROFIBUS master interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2040-M510
|
Optional interface for CX2040
- CANopen master interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2040-M930
|
Optional interface for CX2040
- PROFINET RT, controller interface, Ethernet (2 x RJ45)
|
Beckhoff Vietnam
|
CX2040-N010
|
Optional interface for CX2040
- DVI-D interface, additional DVI-D port for clone or
Extended Display Mode
|
Beckhoff Vietnam
|
CX2040-N011
|
Optional interface for CX2040
- DisplayPort interface, additional displayPort for clone or
Extended Display Mode
|
Beckhoff Vietnam
|
CX2040-N030
|
Optional interface for CX2040
- RS232 interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2040-N031
|
Optional interface for CX2040
- RS485 interface, D-sub socket, 9-pin
configuration as an end point, without echo, termination on
|
Beckhoff Vietnam
|
CX2040-N031-0001
|
Optional interface for CX2040
- RS485 interface, D-sub socket, 9-pin
configuration as an end point, with echo, termination on
|
Beckhoff Vietnam
|
CX2040-N031-0002
|
Optional interface for CX2040
- RS485 interface, D-sub socket, 9-pin
configuration as drop point, without echo, termination off
|
Beckhoff Vietnam
|
CX2040-N031-0003
|
Optional interface for CX2040
- RSRS485 interface, D-sub socket, 9-pin
configuration as drop point, with echo, termination off
|
Beckhoff Vietnam
|
CX2040-N031-0004
|
Optional interface for CX2040
- RS422 interface, D-sub socket, 9-pin
configuration as full duplex end point, termination on
|
Beckhoff Vietnam
|
CX2042-B110
|
Optional interface for CX2042
- EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
|
Beckhoff Vietnam
|
CX2042-B310
|
Optional interface for CX2042
- PROFIBUS slave interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2042-B510
|
Optional interface for CX2042
- CANopen slave interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2042-B930
|
Optional interface for CX2042
- PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
|
Beckhoff Vietnam
|
CX2042-M310
|
Optional interface for CX2042
- PROFIBUS master interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2042-M510
|
Optional interface for CX2042
- CANopen master interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2042-M930
|
Optional interface for CX2042
- PROFINET RT, controller interface, Ethernet (2 x RJ45)
|
Beckhoff Vietnam
|
CX2042-N010
|
Optional interface for CX2042
- DVI-D interface, additional DVI-D port for clone and
Extended Display Mode
|
Beckhoff Vietnam
|
CX2042-N011
|
Optional interface for CX2042
- DisplayPort interface, additional DisplayPort for clone
and Extended Display Mode
|
Beckhoff Vietnam
|
CX2042-N030
|
Optional interface for CX2042
- RS232 interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2042-N031
|
Optional interface for CX2042
- RS485 interface, D-sub socket, 9-pin,
configuration as an end point, without echo, termination on
|
Beckhoff Vietnam
|
CX2042-N031-0001
|
Optional interface for CX2042
- RS485 interface, D-sub socket, 9-pin,
configuration as an end point, with echo, termination on
|
Beckhoff Vietnam
|
CX2042-N031-0002
|
Optional interface for CX2042
- RS485 interface, D-sub socket, 9-pin,
configuration as drop point, without echo, termination off
|
Beckhoff Vietnam
|
CX2042-N031-0003
|
Optional interface for CX2042
- RS485 interface, D-sub socket, 9-pin,
configuration as drop point, with echo, termination off
|
Beckhoff Vietnam
|
CX2042-N031-0004
|
Optional interface for CX2042
- RS422 interface, D-sub socket, 9-pin,
configuration as full duplex end point, termination on
|
Beckhoff Vietnam
|
CX2042-N067
|
Optional interface for CX2042
- 2 x 10G Ethernet interface (wired, 2 x RJ45), version in the upper front of the device
|
Beckhoff Vietnam
|
CX2042-N167
|
Optional interface for CX2042
- 2 x 10G Ethernet interface (optical, 2 x SFP+ cage), version in the upper front of the device
|
Beckhoff Vietnam
|
CX2062-B110
|
Optional interface for CX2062
- EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
|
Beckhoff Vietnam
|
CX2062-B310
|
Optional interface for CX2062
- PROFIBUS slave interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2062-B510
|
Optional interface for CX2062
- CANopen slave interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2062-B930
|
Optional interface for CX2062
- PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
|
Beckhoff Vietnam
|
CX2062-M310
|
Optional interface for CX2062
- PROFIBUS master interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2062-M510
|
Optional interface for CX2062
- CANopen master interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2062-M930
|
Optional interface for CX2062
- PROFINET RT, controller interface, Ethernet (2 x RJ45)
|
Beckhoff Vietnam
|
CX2062-N010
|
Optional interface for CX2062
- DVI-D interface, additional DVI-D port for clone and
Extended Display Mode
|
Beckhoff Vietnam
|
CX2062-N011
|
Optional interface for CX2062
- DisplayPort interface, additional DisplayPort for clone
and Extended Display Mode
|
Beckhoff Vietnam
|
CX2062-N030
|
Optional interface for CX2062
- RS232 interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2062-N031
|
Optional interface for CX2062
- RS485 interface, D-sub socket, 9-pin,
configuration as an end point, without echo, termination on
|
Beckhoff Vietnam
|
CX2062-N031-0001
|
Optional interface for CX2062
- RS485 interface, D-sub socket, 9-pin,
configuration as an end point, with echo, termination on
|
Beckhoff Vietnam
|
CX2062-N031-0002
|
Optional interface for CX2062
- RS485 interface, D-sub socket, 9-pin,
configuration as drop point, without echo, termination off
|
Beckhoff Vietnam
|
CX2062-N031-0003
|
Optional interface for CX2062
- RS485 interface, D-sub socket, 9-pin,
configuration as drop point, with echo, termination off
|
Beckhoff Vietnam
|
CX2062-N031-0004
|
Optional interface for CX2062
- RS422 interface, D-sub socket, 9-pin,
configuration as full duplex end point, termination on
|
Beckhoff Vietnam
|
CX2062-N067
|
Optional interface for CX2062
- 2 x 10G Ethernet interface (wired, 2 x RJ45), version in the upper front of the device
|
Beckhoff Vietnam
|
CX2062-N167
|
Optional interface for CX2062
- 2 x 10G Ethernet interface (optical, 2 x SFP+ cage), version in the upper front of the device
|
Beckhoff Vietnam
|
CX2072-B110
|
Optional interface for CX2072
- EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
|
Beckhoff Vietnam
|
CX2072-B310
|
Optional interface for CX2072
- PROFIBUS slave interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2072-B510
|
Optional interface for CX2072
- CANopen slave interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2072-B930
|
Optional interface for CX2072
- PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
|
Beckhoff Vietnam
|
CX2072-M310
|
Optional interface for CX2072
- PROFIBUS master interface, D-sub socket, 9-pin
|
Beckhoff Vietnam
|
CX2072-M510
|
Optional interface for CX2072
- CANopen master interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2072-M930
|
Optional interface for CX2072
- PROFINET RT, controller interface, Ethernet (2 x RJ45)
|
Beckhoff Vietnam
|
CX2072-N010
|
Optional interface for CX2072
- DVI-D interface, additional DVI-D port for clone and
Extended Display Mode
|
Beckhoff Vietnam
|
CX2072-N011
|
Optional interface for CX2072
- DisplayPort interface, additional DisplayPort for clone and
Extended Display Mode
|
Beckhoff Vietnam
|
CX2072-N030
|
Optional interface for CX2072
- RS232 interface, D-sub plug, 9-pin
|
Beckhoff Vietnam
|
CX2072-N031
|
Optional interface for CX2072
- RS485 interface, D-sub socket, 9-pin,
configuration as an end point, without echo, termination on
|
Beckhoff Vietnam
|
CX2072-N031-0001
|
Optional interface for CX2072
- RS485 interface, D-sub socket, 9-pin,
configuration as an end point, with echo, termination on
|
Beckhoff Vietnam
|
CX2072-N031-0002
|
Optional interface for CX2072
- RS485 interface, D-sub socket, 9-pin,
configuration as drop point, without echo, termination off
|
Beckhoff Vietnam
|
CX2072-N031-0003
|
Optional interface for CX2072
- RS485 interface, D-sub socket, 9-pin,
configuration as drop point, with echo, termination off
|
Beckhoff Vietnam
|
CX2072-N031-0004
|
Optional interface for CX2072
- RS422 interface, D-sub socket, 9-pin,
configuration as full duplex end point, termination on
|
Beckhoff Vietnam
|
CX2072-N067
|
Optional interface for CX2072
- 2 x 10G Ethernet interface (wired, 2 x RJ45), version in the upper front of the device
|
Beckhoff Vietnam
|
CX2072-N167
|
Optional interface for CX2072
- 2 x 10G Ethernet interface (optical, 2 x SFP+ cage), version in the upper front of the device
|
Beckhoff Vietnam
|
CX2100-0004
|
Power supply unit for CX2020 and CX2030 core
- power supply 24 V DC (-15 %/+20 %)
- max. output: 45 W
- E-bus (EtherCAT Terminals) or K-bus (Bus Terminals),
automatic recognition
- current supply E-bus/K-bus: up to 2 A
- FSTN display 2 lines x 16 characters of text, lighted, Navi switch 4+1
- diagnostics LED: 1 x PWR, 1 x I/O Run, 1 x I/O Err
- protection class IP 20
- operating/storage temperature -25 °C … +60 °C/-40 °C … +85 °C
- weight approx. 375 g
- dimensions (W x H x D) 40 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX2100-0014
|
Power supply unit for CX20xx
- 24 V DC (-15 %/+20 %)
- max. output: 130 W
- E-bus (EtherCAT Terminals) or K-bus (Bus Terminals),
automatic recognition
- current supply E-bus/K-bus: up to 2 A
- FSTN display 2 lines x 16 characters of text, lighted,
Navi switch 4+1
- diagnostics LED: 1 x PWR, 1 x I/O Run, 1 x I/O Err
- protection class IP 20
- operating/storage temperature -25 °C … +60 °C/-40 °C … +85 °C
- weight approx. 550 g
- dimensions (W x H x D) 64 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX2100-0904
|
Power supply unit with integrated capacitive UPS for uninterruptible
power supply of the CX controller
- suitable for CX2020 and CX2030
- not suitable for CX2040, CX2042, CX2062 and CX2072
- 24 V DC (-15 %/+20 %)
- max. output: 45 W
- electric charge: 75 As
- E-bus (EtherCAT Terminals) or K-bus (Bus Terminals),
automatic recognition
- current supply E-bus/K-bus: up to 2 A
- simple retrofitting in the field by adding to existing CX controller
is possible
- maintenance-free due to advanced capacitive technology
(Supercaps)
- FSTN display 2 lines x 16 characters of text, lighted, Navi switch 4+1
- UPS status can be queried via TwinCAT
- protection class IP 20
- operating/storage temperature -25 °C … +50 °C/-25 °C … +60 °C
- weight approx. 1025 g
- dimensions (W x H x D) 118 x 100 x 91 mm
|
Beckhoff Vietnam
|
CX2100-0914
|
Power supply unit with integrated UPS for uninterruptible power supply of the CX controller
- suitable for CX2020, CX2030, CX2040, CX2042, CX2062 and CX2072
- 24 V DC (-15 %/+20 %)
- max. output: 100 W
- E-bus (EtherCAT Terminals) or K-bus (Bus Terminals),
automatic recognition
- current supply E-bus/K-bus: up to 2 A
- integrated charger for external CX2900-0192 Battery pack
- connector to provide backup power for external 24 V DC components
(max. 2 A)
- simple retrofitting in the field by adding to existing CX controller is
possible
- FSTN display 2 lines x 16 characters of text, lighted, Navi switch 4+1
- UPS status can be queried via TwinCAT
- 8-pin power plug included in the scope of supply of the CX2900-0192
battery
- CAT connection cable to the battery is not included
(please order separately, e.g. ZK1090-9191-xxxx, at least 8-pin)
- protection class IP 20
- operating/storage temperature -25...+60 °C/-25...+85 °C
- weight approx. 695 g
- dimensions (W x H x D) 84 x 100 x 91
|
Beckhoff Vietnam
|
CX2500-0020
|
Interface module for audio In/Out connections
– only usable for CX20x0 and CX20x3
– Line IN, Line OUT, Mic IN, 7.1 (3.5 mm socket for jack plug)
– SPDIF (RCA socket)
– easy field modification possible
– protection class IP 20
– operating/storage temperature -25 °C … +60 °C/-40 °C … +85 °C
– weight approx. 180 g
– dimensions (W x H x D) 24 x 99 x 54.5 mm
|
Beckhoff Vietnam
|
CX2500-0030
|
Interface module for 2 x RS232 connections
- full 115 kbaud on both channels
- electrically isolated interfaces (optically isolated)
- easy field modification possible
- based on PCI Express
- protection class IP 20
- operatin/storage temperature: -25°C...+60°C/-40°C...+85°C
- dimensions: (B x H x T): 22 x 100 x 55mm
|
Beckhoff Vietnam
|
CX2500-0031
|
Interface module for 2 x RS422/RS485 connections optically isolated
- full 115 kbaud on both channels
- electrically isolated interfaces (optically isolated)
- modes: RS485: with/without echo, with/without termination
RS422: full duplex
- easy field modification possible
- based on PCI Express
- protection class IP 20
- operatin/storage temperature: -25°C...+60°C/-40°C...+85°C
- diemensions: (B x H x T): 22 x 100 x 55mm
|
Beckhoff Vietnam
|
CX2500-0060
|
Interface module for 2 x 10/100/1000 MBit Ethernet
- 2 x RJ 45 10/100/1000 Mbit/s
- easy field modification possible
- based on PCI Express
- protection class IP 20
- operatin/storage temperature: -25°C...+60°C/-40°C...+85°C
- diemensions: (B x H x T): 22 x 100 x 55mm
|
Beckhoff Vietnam
|
CX2500-0061
|
Interface module for 1 x 10/100/1000 MBit Ethernet PoE
- 1 x RJ45 10/100/1000 MBit/s with Power-over-Ethernet (PoE)
- supports devices of PoE Class 0, 1, 2, 3 and 4 as defined by
PoE Standard IEEE 802.3af-2003
- max. PoE power delivery 15,4 W
- internal generation of PoE-supply voltage
(no external 48 V power feeding required)
- isolation voltage Ethernet/internal electronics: 500 V
- diagnostics LEDs: PWR, PoE, PM1, PM2
- based on PCI Express
- protection class IP 20
- operating/storage temperature: -25 °C ... +60 °C/-40 °C ... +85 °C
- weight approx. 208 g
- dimensions (W x H x D): 24 x 99 x 54.5 mm
|
Beckhoff Vietnam
|
CX2500-0070
|
Extension module for 4 USB ports
- 4 x USB 3.0 ports Type A, current output max. 2A total current
- supports USB 1.1, USB 2.0 and USB 3.0 standards
- transfer rates: 1,5 Mbit/s, 12 Mbit/s, 480 Mbit/s and 5 Gbit/s
- easy field modification possible
- based on PCI Express
- protection class IP 20
- operating/storage temperature: -25°C ... +60 °C/-40°C ... +85°C
- dimensions: (B x H x T): 22 x 100 x 55 mm
|
Beckhoff Vietnam
|
CX2500-B310
|
PROFIBUS slave interface module
- number of fieldbus channels: 1
- connector type: 9-pin D-sub, female
- PROFIBUS DP, DP-V1, DP-V2 (MC)
- communication speed: 9.6 kbaud...12 Mbaud
- expandable process image: up to 15 virtual slaves in addition
- max. process image: 16 x 240 bytes In/16 x 240 bytes Out
(virtual slaves)
- interface to the CX through PCIe
- hardware diagnostics 2 LEDs
- protection class IP 20
- operating/storage temperature -25 °C … +60 °C/-40 °C … +85 °C
- weight approx. 180 g
- dimensions (W x H x D) 24 x 99 x 54,5 mm
|
Beckhoff Vietnam
|
CX2500-B510
|
CANopen slave interface module
- number of fieldbus channels: 1
- connector type: 9-pin D-sub, female
- electrically isolated interfaces
- transmission rate: 10, 20, 50, 100, 125, 250, 500, 800, 1000 kbaud
- expandable process image: up to 15 virtual slaves in addition
- max. process image: 16x16 Tx PDOs/16x16 Rx PDOs (8 byte per PDO)
- interface to the CX core CPU through PCIe
- hardware diagnostics 2 LEDs
- protection class IP 20
- operating/storage temperature -25 °C … +60 °C/-40 °C … +85 °C
- weight approx. 180 g
- dimensions (W x H x D) 24 x 99 x 54,5 mm
|
Beckhoff Vietnam
|
CX2500-M310
|
PROFIBUS master interface module
- number of fieldbus channels: 1
- connector type: 9-pin D-sub, female
- supports PROFIBUS DP (standard),
PROFIBUS DP-V1 (Cl. 1+2: acyclic services, alarms), DP-V2 (MC)
- transmission rate 9.6 kbaud...12 Mbaud
- interface to the CX core CPU through PCIe
- bus nodes per channel: max. 125 slaves with up to 244 bytes input,
output, parameter, configuration, diagnostic data per slave
- differing cycle times per slave are possible
- hardware diagnostics 2 LEDs
- protection class IP 20
- operating/storage temperature -25 °C … +60 °C/-40 °C … +85 °C
- weight approx. 180 g
- dimensions (W x H x D) 24 x 99 x 54,5 mm
|
Beckhoff Vietnam
|
CX2500-M510
|
CANopen master interface module
- number of fi eldbus channels: 1
- connector type: 9-pin D-sub, male
- transmission rate 10, 20, 50, 100, 125, 250, 500, 800, 1000 kbaud
- interface to the CX core CPU through PCIe
- bus nodes per channel: max. 127 slaves
- termination resistor switchable
- hardware diagnostics 2 LEDs
- protection class IP 20
- operating/storage temperature -25 °C … +60 °C/-40 °C … +85 °C
- weight approx. 220 g
- dimensions (W x H x D) 22 x 100 x 55 mm
|
Beckhoff Vietnam
|
CX2550-0010
|
Extension module for usage of a mass storage CFast
- only usable for CX20xx
- Interface: SATA
- Type of connection: CFast slot
- Diagnostics LED: 1 x RDY, 1 x HDD
- protection class IP 20
- operating/storage temperature: -25 °C ... +60 °C/-40 °C ... +85 °C
- weight: approx. 95 g
- dimensions (W x H x D) 24 x 99 x 91 mm
|
Beckhoff Vietnam
|
CX2550-0020
|
Extension module for 2½-inch HDD/SSD
- only usable for CX20xx
- Interface: SATA 6G
- type of connection: 2½-inch slot
- protection class IP 20
- operating/storage temperature: -25 °C … +60 °C/-40 °C … +85 °C
- dimensions (W x H x D) 24 x 99 x 54.5 mm
|
Beckhoff Vietnam
|
CX2550-0179
|
Extension module USB Extender Tx for CP69xx and CP79xx
– only usable for CX20xx
– USB Extended transmitter module
– 1 USB Extended output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel
with DVI/USB Extended interface CP69xx or CP79xx
– USB transfer rate up to 12 Mbit/s for USB 1.1, downwards compatible to USB 1.0
– protection class IP 20
– operating/storage temperature: -25 °C … +60 °C/-40 °C … +85 °C
– weight approx. 190 g
– dimensions (W x H x D) 24 x 99 x 54.5 mm
|
Beckhoff Vietnam
|
CX2550-0279
|
Extension module USB Extender 2.0 Tx for CP29xx-0000 and CP39xx-0000
- only usable for CX20xx
- USB Extended 2.0 transmitter module
- 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel with DVI/USB Extended interface CP29xx-0000 or CP39xx-0000
- USB transfer rate up to 480 Mbit/s for USB 2.0
- protection class IP 20
- operating/storage temperature: -25 °C ... +60 °C/-40 °C ... +85 °C
- weight approx. 190 g
- dimensions (W x H x D) 24 x 99 x 54.5 mm
|
Beckhoff Vietnam
|
CX2550-0279-1001
|
CX2250-0279 connecting kit 20 m for CP29xx-0000, consisting of:
20 m DVI cable, 20 m CAT 5 cable for USB-E-2.0,
CX2550-0279 USB 2.0 Extension Modul
|
Beckhoff Vietnam
|
CX2900-0023
|
8 GB CFast card, SLC flash, extended temperature range,
instead of 40 GB CFast card
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0026
|
20 GB CFast card, 3D flash, extended temperature range
|
Beckhoff Vietnam
|
CX2900-0027
|
4 GB CFast card, SLC flash, extended temperature range,
instead of 20 GB CFast card
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0028
|
4 GB CFast card, SLC-Flash, extended temperature range
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0029
|
8 GB CFast card, SLC flash, extended temperature range,
instead of 20 GB CFast card
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0030
|
8 GB CFast card, SLC-Flash, extended temperature range
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0031
|
16 GB CFast card, SLC flash, extended temperature range,
instead of 20 GB CFast card
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0032
|
16 GB CFast card, SLC-Flash, extended temperature range
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0033
|
16 GB CFast card, SLC flash, extended temperature range,
instead of 40 GB CFast card
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0034
|
32 GB CFast card, SLC-Flash, extended temperature range
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0035
|
32 GB CFast card, SLC flash, extended temperature range,
instead of 40 GB CFast card
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0036
|
64 GB CFast card, SLC-Flash, extended temperature range
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0037
|
64 GB CFast card, SLC flash, extended temperature range,
instead of 40 GB CFast card
Expiring item. We recommend the longtime-available CFast cards with 3D flash.
|
Beckhoff Vietnam
|
CX2900-0038
|
40 GB CFast card, 3D flash, extended temperature range
|
Beckhoff Vietnam
|
CX2900-0038-1002
|
Can only be purchased with demo system.
40 GB CFast card, 3D flash, extended temperature range
|
Beckhoff Vietnam
|
CX2900-0039
|
40 GB CFast card, 3D flash, extended temperature range,
instead of 20 GB CFast card
|
Beckhoff Vietnam
|
CX2900-0040
|
80 GB CFast card, 3D flash, extended temperature range
|
Beckhoff Vietnam
|
CX2900-0042
|
160 GB CFast card, 3D flash, extended temperature range
|
Beckhoff Vietnam
|
CX2900-0043
|
80 GB CFast card, 3D flash, extended temperature range,
instead of 20 GB CFast card
|
Beckhoff Vietnam
|
CX2900-0045
|
80 GB CFast card, 3D flash, extended temperature range,
instead of 40 GB CFast card
|
Beckhoff Vietnam
|
CX2900-0047
|
160 GB CFast card, 3D flash, extended temperature range, instead of 40 GB CFast card
|
Beckhoff Vietnam
|
CX2900-0101
|
10 locking pin sets (each set consisting of two pieces) for CX20x0
modules
|
Beckhoff Vietnam
|
CX2900-0102
|
Cover for left-side module bus connector - 5 pieces
|
Beckhoff Vietnam
|
CX2900-0103
|
Spare fan cartridge for CX2040, CX2042, CX2043, CX2062, CX2072 and CX2020,
CX2030, CX2033 with fan option
- cartridge consisting of chassis and 60 mm fan
- simple exchange in the field due to wireless installation
- dimensions (W x H x D) 67 x 62 x 16 mm
|
Beckhoff Vietnam
|
CX2900-0104
|
Plug set (spare part) for connecting the CX2100-0914 UPS module and CX2900-0192 battery pack
|
Beckhoff Vietnam
|
CX2900-0105
|
Plastic covering hood (spare part) for 2½-inch SSD/HDD module
CX2550-0020
|
Beckhoff Vietnam
|
|
0373 238 670