Đầu dò : Fe-2.5/ Fe-0.6Pen/ Fe-10/ NFe-2.0/ NFe-8

 

ELECTRO-MAGNETIC / EDDY CURRENT COATING THICKNESS METERS

Exclusive probes for SWT series

Separate-interchangeable probes available with a main unit

Selections of probe for ferrous (electro-magnetic) or non-ferrous ( eddy current) substrate depending on a measuring object

Capability of selections probe like high-stable probe to measure minute piece objects or alike depending on applications and a measurement range

Đầu dò : Fe-2.5

Specifications of SWT (Fe probes)
 ModelsFe-2.5※1/2.5LFe-2.5LwAFe-0.6Pen MethodsMagnetic inducing type Ranges0~2.50mm0~600μm Display resolutions1μm:0~999μm
switching to
0.1μm:0~400μm
0.5μm:400~500μm
0.01mm:1.00~2.50mm1μm:0~600μm
switching to
0.1μm:0~400μm
0.5μm:401~500μm Accuracies
(perpendicularly
testing on
flat face)0~100μm:±1μm
or ±2% the reading value
101μm~2.50mm:±2%
0~100μm:±1μm or ±2% the reading value
101μm~600μm:
±2% the reading value ProbesOne point contact constant pressure type,
V cut
2.5:φ15×47mm
2.5L:18x23x67mmOne point contact constant pressure type,
Measuring part:About 20x57mm
Total Length: about 550~1,540mm (flexible)One point contact constant pressure type, V cut
φ5.6×92.2mmV type probe adaptors※2
/NonNon AccessoriesStandard thickness,
Zero plate for testing (Fe)Standard thickness,
Zero plate for testing (Fe)
Carrying caseStandard thickness,
Zero plate for testing (Fe) Measuring objectsCoating, lining, thermal spray films, plating (except electrolyte nickel plating) etc. on magnetic metal substrate like iron, steel.Coating, lining, plating on high/hard-to-reach/remote place on magnetic metal substrate like iron, steel.Coating, lining, plating on a narrow/small place and part substrate like iron, steel.
※1.Probes are heat-resistant (about 200℃). (Fe-2..5)
※2.V type probe adaptors (3 kinds: lessΦ5, Φ5~10, Φ10~20) can be used with Fe-2.5.
 ModelsFe-10Fe-20 MethodsMagnetic inducing type Ranges0~10mm0~20mm Display resolutions1μm:0~999μm
0.01mm:1~10mm1μm:0~999μm
0.01mm:1~5mm
0.1mm:5~20mm Accuracies
(perpendicularly
testing on flat
face)0~3mm:±(5μm + 3% the read value)
Over or 3.01mm:±3% the read value ProbesOne point contact constant pressure type, V cut
φ18x47mmOne point contact constant pressure type, V cut
φ35x55mm AccessoriesStandard thickness,
Zero plate for testing (Fe) Measuring  objectsRelatively thicker objectsThick objects
Probe must be ordered separately.
Specifications of SWT (NFe probes)
 ModelsNFe-2.0※1/2.0L MethodsEddy current type Ranges0~2.00mm Display
resolutions1μm:0~999μm
switching to
0.1μm:0~400μm
0.5μm:400~500μm
0.01mm:1.00~2.00mm Accuracies
(perpendicularly
on flat face)0~100μm:±1μm
or ±2% the read value
101μm~2.00mm:±2% ProbesOne point contact constant pressure type, V cut
2.0:φ15×47mm
2.0L:18x22x57mmV type probe adaptor※2/Non AccessoriesStandard thickness, Zero plate for testing (NFe) Measuring
objectsInsulated films on non-Magnetic metal substrates like aluminum, cupperRelatively general use objects
Probe must be ordered separately.
※1.Probes are heat-resistant (about 200℃). (NFe-2.0)
※2.V type probe adaptors (3 kinds:lessΦ5, Φ5~10, Φ10~20) can be used with NFe-2.0.
 ModelsNFe-0.6NFe-5NFe-8 MethodsEddy current type Ranges0~600μm0~5mm0~8mm Display
resolutions1μm:0~600μm
switching to
0.1μm:0~400μm
0.5μm:400~500μm1μm:0~999μm
0.01mm: 1~5mm1μm:0~999μm
0.01mm:1~8mm Accuracies
(perpendicularly
on flat face)0~100μm:±1μm
or ±2% the read value
101μm~600μm:±2%0~3mm:±(5μm + ±3% the read value)
Over or 3.01mm:±3% the read value0~3mm:±(5μm + ±3% the read value)
Over or 3.01mm:±3% the read value ProbesOne point contact constant pressure type,
φ13×45.5mmOne point contact constant pressure type, V cut
φ20.4×47.1mmOne point contact constant pressure type, V cut
φ35×59mmNon AccessoriesStandard thickness, Zero plate for testing (NFe) Measuring
objectsInsulated films on non-Magnetic metal substrates like aluminum, cupperlike aluminum, cupper for high stability for narrow bar , tube, minute piecesRelatively thick objectsRelatively thick objects

Xem thêm sản phẩm tại đây

Đầu dò : Fe-2.5

Liên hệ Ms. Dung tư vấn ngay

dung@ansgroup.asia

  0903 307 626