Part Number 1821.047.037 SIGNODE Vietnam

Giá bán: Liên hệ

Hãng sản xuất: Signode Vietnam

Danh mục: Machine & System (M&S)

Nhà cung cấp: ANS VIETNAM

Xuất sứ:

Bảo hành: 12

Gọi lại cho tôi

Liên hệ tư vấn

Ms. Như

nhu@ansgroup.asia

0373 238 670

live:.cid.5bbb32e4b8465e80

100% SWITZERLAND Origin

SIGNODE
VIETNAM

BXT3-16
 Strapping tool
Operation mode: auto / semi / manual
 Variable tension speed range: 0–220 mm/s (8.6 in/s)
 Relative humidity up to 90%
 Working temperature -10 °C to +40 °C (14–104 °F)

100% INDIA Origin

SIGNODE Vietnam

M410N-114-EHT3-1H-A
 Rotating Eye
strapping machine for hot application includes
 - Base Frame with Retraction,
- DPAM 1000 dispenser for 450 Kg steel strap coil.
- Pneumatics system with quick disconnect manifold block for strapping head.
- Electricals with S7 1500 PLC (Non Fail Safe PLC) with 9’ HMI.
- PN / PN Coupler for interface with customers PLC

100% KOREA Origin

SIGNODE
Vietnam

32080 BW SJS(CSP 880)
Signode Straps
- Packing Band/Seal BAND,OTHERS,SUP120-BLUE,0.8TX32W,[SUP120_GRADE/HANKUM],+120KG/MM2, TOLERANCE: THICKNESS: + 0.05/-0.03,WIDTH: +/- 0.127
 - OR [MAGNUS-1431 MPW/SIGNODE],+0.79MM +0.05/-0.025
 - Or [CSP880/SAM HWAN],+95 KG/MM2, 420-450 KG/ROLL

100% KOREA Origin

SIGNODE
Vietnam

32090 BW SJW(GRADE SAE1022)
Signode Straps
Dâyđai đóng bao độ cứng caoUSSG#21 0.89mmx31.8mmW Độbềnkéo>840(N/mm2),Độ giãn dài>6.5%-12% Sơn màu xanh,làm sạch bavia
material(鋼帶材質)
Tiêu chuẩn chất lượng carbon steel(碳鋼)
Strap Width(鋼帶寬度)
Tiêu chuẩn chất lượng 31.75±0.13mm
Strap thickness(鋼帶厚度）
Tiêu chuẩn chất lượng 0.89±0.05mm
Surface treatment(表面處理 )
Tiêu chuẩn chất lượng Blue and Waxed,deburred edges(藍化處理上蠟,需修毛邊,單捲不允許有鋼帶對焊接帶)
Camber (max/2.4m)((偏曲量(max/2.4m))
Tiêu chuẩn chất lượng <12 mm
Tiwst (max/2.4m)(扭曲量(max/2.4m）
Tiêu chuẩn chất lượng 20°
Min Tensile strength (最小抗拉強度)
Tên quy cách 抗拉強度依照ASTM D3953進行測試(鋼帶直接取樣進行拉伸試驗)
Min Tensile strength (最小抗拉強度)
Tên quy cách 未符合其中規範標準，由買方依照檢驗規範研判是否允收轉用(需折讓35%金額)，允收條件：抗拉強度>670(N/mm²)
Elong.(GL=152mm)(伸長率(GL152mm))
Tên quy cách 延伸率GL=152mm按照ASTM D3953進行測試(鋼帶直接取樣進行拉伸試驗)
Elong.(GL=152mm)(伸長率(GL152mm))
Tên quy cách 未符合其中規範標準，由買方依照檢驗規範研判是否允收轉用(需折讓35%金額)，允收條件:延伸率(GL=152)：0.5-12%
Tên quy cách Strap Coil Outside diameter(鋼帶盤元外徑)
Tiêu chuẩn chất lượng 800-900mm
Strap Coil Inside diameter(鋼帶盤元內徑)
Tiêu chuẩn chất lượng 370-500mm
Strap Coil Height(鋼帶盤元高度)
Tiêu chuẩn chất lượng 150-300mm
Strap Coil weight(鋼帶盤元重量)
Tiêu chuẩn chất lượng 400-460KG
Mechanical properties(機械性質)
Tiêu chuẩn chất lượng High strength and toughness (高強韌鋼帶)
Certificate of Origin and material(提供產地證明及材質證明)
Test report(出廠測試報告)
Tiêu chuẩn chất lượng Material(材料)、stretching test(拉伸試驗)、dimension(尺寸)
In 5-7 days after quote the seller are need to provide samples (12 pieces, 500mm L / 1 piece) to the FHS for test the tensile strength

100% USA Origin

SIGNODE
Vietnam

Pneumac combinaon toolfor steel strapping
Model: PNSC2-58

100% USA/Thailand Origin

Signode
Vietnam

SEAL VALVE SLEEVE
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 423964

100% USA/Thailand Origin

Signode
Vietnam

SEAL MOTOR ASSY
(Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 423980

100% USA/Thailand Origin

Signode
Vietnam

FRAME
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 427986

100% USA/Thailand Origin

Signode
Vietnam

UPPER WELD GRIPPER
(Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 427989

100% USA/Thailand Origin

Signode
Vietnam

LOWER WELD GRIPPER MACH
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 424482

100% KOREA Origin

SIGNODE
Vietnam

Steel strap
• ITEM : 0.8X32
 • GRADE : SAE1022
• SURFACE : BLUE & WAXED
• ROLL TYPE: JUMBO
Technical Requirements:
• Tensile strength (TS) - Quality standard > 840 MPa = 840 N/mm2 (~ 84 kg/mm2)
 • Elongation rate - Quality standard 6.5 - 12%
• Surface treatment - Quality standard (blue and waxed) with oxidation treatment, not using welding method to connect steel wire
• Inner radius for a roll: 406 mm
 • Outside radius for a roll: 630mm
• Width for a roll: 150mm -190mm (each roll has the smallest width: 150mm, the largest width is 190mm)
• Certificates of Origin and manufacturer’s other documents regarding the testing report,..

100% THAILAND Origin

SIGNODE
Vietnam

P/N: 423412
PIVOT SHAFT
SPARE OF PRHR-114

100% Switzerland Origin

Signode
Vietnam

Battery Powered Tool for steel strapping
Model: BPT-L19

100% Thailand Origin

Signode
Vietnam

Seal valve stem (key: 33)
Parts for Strapping Tool
Part no: 423947

100% Thailand Origin

Signode
Vietnam

Check valve ASSY
Parts for Strapping Tool
Part no: 424376

100% Thailand Origin

Signode
Vietnam

Battery-powered tool for plastic strapping 16-19mm
Model: BXT3-19

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.047.037
 Tensioning wheel for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.209.041
Knife for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.048.031
 Tooth plate for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1832.011.317
LCD operating unit for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.035.011
 Bolt for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1933.210.120
 Needle bearing for SIGNODE strapping tools (BXT3-19)

100% USA/India Origin

SIGNODE
Vietnam

M410N-114-EHT3-1H-A
 Rotating Eye strapping machine for hot application includes
 - Base Frame with Retraction,
- DPAM 1000 dispenser for 450 Kg steel strap coil.
- Pneumatics system with quick disconnect manifold block for strapping head.
- Electricals with S7 1500 PLC (Non Fail Safe PLC) with 9’ HMI.

100% Thailand Origin

SIGNODE
Vietnam

Model RCD-1431
Heavy-Duty Sealers Side-Action

100% Thailand Origin

SIGNODE
Vietnam

Model TH-114
Feedwheel Tensioners

100% SWITZERLAND Origin

SIGNODE
VIETNAM

BXT3-16
 Strapping tool
Operation mode: auto / semi / manual
 Variable tension speed range: 0–220 mm/s (8.6 in/s)
 Relative humidity up to 90%
 Working temperature -10 °C to +40 °C (14–104 °F)

100% INDIA Origin

SIGNODE Vietnam

M410N-114-EHT3-1H-A
 Rotating Eye
strapping machine for hot application includes
 - Base Frame with Retraction,
- DPAM 1000 dispenser for 450 Kg steel strap coil.
- Pneumatics system with quick disconnect manifold block for strapping head.
- Electricals with S7 1500 PLC (Non Fail Safe PLC) with 9’ HMI.
- PN / PN Coupler for interface with customers PLC

100% KOREA Origin

SIGNODE
Vietnam

32080 BW SJS(CSP 880)
Signode Straps
- Packing Band/Seal BAND,OTHERS,SUP120-BLUE,0.8TX32W,[SUP120_GRADE/HANKUM],+120KG/MM2, TOLERANCE: THICKNESS: + 0.05/-0.03,WIDTH: +/- 0.127
 - OR [MAGNUS-1431 MPW/SIGNODE],+0.79MM +0.05/-0.025
 - Or [CSP880/SAM HWAN],+95 KG/MM2, 420-450 KG/ROLL

100% KOREA Origin

SIGNODE
Vietnam

32090 BW SJW(GRADE SAE1022)
Signode Straps
Dâyđai đóng bao độ cứng caoUSSG#21 0.89mmx31.8mmW Độbềnkéo>840(N/mm2),Độ giãn dài>6.5%-12% Sơn màu xanh,làm sạch bavia
material(鋼帶材質)
Tiêu chuẩn chất lượng carbon steel(碳鋼)
Strap Width(鋼帶寬度)
Tiêu chuẩn chất lượng 31.75±0.13mm
Strap thickness(鋼帶厚度）
Tiêu chuẩn chất lượng 0.89±0.05mm
Surface treatment(表面處理 )
Tiêu chuẩn chất lượng Blue and Waxed,deburred edges(藍化處理上蠟,需修毛邊,單捲不允許有鋼帶對焊接帶)
Camber (max/2.4m)((偏曲量(max/2.4m))
Tiêu chuẩn chất lượng <12 mm
Tiwst (max/2.4m)(扭曲量(max/2.4m）
Tiêu chuẩn chất lượng 20°
Min Tensile strength (最小抗拉強度)
Tên quy cách 抗拉強度依照ASTM D3953進行測試(鋼帶直接取樣進行拉伸試驗)
Min Tensile strength (最小抗拉強度)
Tên quy cách 未符合其中規範標準，由買方依照檢驗規範研判是否允收轉用(需折讓35%金額)，允收條件：抗拉強度>670(N/mm²)
Elong.(GL=152mm)(伸長率(GL152mm))
Tên quy cách 延伸率GL=152mm按照ASTM D3953進行測試(鋼帶直接取樣進行拉伸試驗)
Elong.(GL=152mm)(伸長率(GL152mm))
Tên quy cách 未符合其中規範標準，由買方依照檢驗規範研判是否允收轉用(需折讓35%金額)，允收條件:延伸率(GL=152)：0.5-12%
Tên quy cách Strap Coil Outside diameter(鋼帶盤元外徑)
Tiêu chuẩn chất lượng 800-900mm
Strap Coil Inside diameter(鋼帶盤元內徑)
Tiêu chuẩn chất lượng 370-500mm
Strap Coil Height(鋼帶盤元高度)
Tiêu chuẩn chất lượng 150-300mm
Strap Coil weight(鋼帶盤元重量)
Tiêu chuẩn chất lượng 400-460KG
Mechanical properties(機械性質)
Tiêu chuẩn chất lượng High strength and toughness (高強韌鋼帶)
Certificate of Origin and material(提供產地證明及材質證明)
Test report(出廠測試報告)
Tiêu chuẩn chất lượng Material(材料)、stretching test(拉伸試驗)、dimension(尺寸)
In 5-7 days after quote the seller are need to provide samples (12 pieces, 500mm L / 1 piece) to the FHS for test the tensile strength

100% USA Origin

SIGNODE
Vietnam

Pneumac combinaon toolfor steel strapping
Model: PNSC2-58

100% USA/Thailand Origin

Signode
Vietnam

SEAL VALVE SLEEVE
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 423964

100% USA/Thailand Origin

Signode
Vietnam

SEAL MOTOR ASSY
(Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 423980

100% USA/Thailand Origin

Signode
Vietnam

FRAME
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 427986

100% USA/Thailand Origin

Signode
Vietnam

UPPER WELD GRIPPER
(Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 427989

100% USA/Thailand Origin

Signode
Vietnam

LOWER WELD GRIPPER MACH
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 424482

100% KOREA Origin

SIGNODE
Vietnam

Steel strap
• ITEM : 0.8X32
 • GRADE : SAE1022
• SURFACE : BLUE & WAXED
• ROLL TYPE: JUMBO
Technical Requirements:
• Tensile strength (TS) - Quality standard > 840 MPa = 840 N/mm2 (~ 84 kg/mm2)
 • Elongation rate - Quality standard 6.5 - 12%
• Surface treatment - Quality standard (blue and waxed) with oxidation treatment, not using welding method to connect steel wire
• Inner radius for a roll: 406 mm
 • Outside radius for a roll: 630mm
• Width for a roll: 150mm -190mm (each roll has the smallest width: 150mm, the largest width is 190mm)
• Certificates of Origin and manufacturer’s other documents regarding the testing report,..

100% THAILAND Origin

SIGNODE
Vietnam

P/N: 423412
PIVOT SHAFT
SPARE OF PRHR-114

100% Switzerland Origin

Signode
Vietnam

Battery Powered Tool for steel strapping
Model: BPT-L19

100% Thailand Origin

Signode
Vietnam

Seal valve stem (key: 33)
Parts for Strapping Tool
Part no: 423947

100% Thailand Origin

Signode
Vietnam

Check valve ASSY
Parts for Strapping Tool
Part no: 424376

100% Thailand Origin

Signode
Vietnam

Battery-powered tool for plastic strapping 16-19mm
Model: BXT3-19

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.047.037
 Tensioning wheel for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.209.041
Knife for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.048.031
 Tooth plate for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1832.011.317
LCD operating unit for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.035.011
 Bolt for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1933.210.120
 Needle bearing for SIGNODE strapping tools (BXT3-19)

100% USA/India Origin

SIGNODE
Vietnam

M410N-114-EHT3-1H-A
 Rotating Eye strapping machine for hot application includes
 - Base Frame with Retraction,
- DPAM 1000 dispenser for 450 Kg steel strap coil.
- Pneumatics system with quick disconnect manifold block for strapping head.
- Electricals with S7 1500 PLC (Non Fail Safe PLC) with 9’ HMI.

100% Thailand Origin

SIGNODE
Vietnam

Model RCD-1431
Heavy-Duty Sealers Side-Action

100% Thailand Origin

SIGNODE
Vietnam

Model TH-114
Feedwheel Tensioners

100% SWITZERLAND Origin

SIGNODE
VIETNAM

BXT3-16
 Strapping tool
Operation mode: auto / semi / manual
 Variable tension speed range: 0–220 mm/s (8.6 in/s)
 Relative humidity up to 90%
 Working temperature -10 °C to +40 °C (14–104 °F)

100% INDIA Origin

SIGNODE Vietnam

M410N-114-EHT3-1H-A
 Rotating Eye
strapping machine for hot application includes
 - Base Frame with Retraction,
- DPAM 1000 dispenser for 450 Kg steel strap coil.
- Pneumatics system with quick disconnect manifold block for strapping head.
- Electricals with S7 1500 PLC (Non Fail Safe PLC) with 9’ HMI.
- PN / PN Coupler for interface with customers PLC

100% KOREA Origin

SIGNODE
Vietnam

32080 BW SJS(CSP 880)
Signode Straps
- Packing Band/Seal BAND,OTHERS,SUP120-BLUE,0.8TX32W,[SUP120_GRADE/HANKUM],+120KG/MM2, TOLERANCE: THICKNESS: + 0.05/-0.03,WIDTH: +/- 0.127
 - OR [MAGNUS-1431 MPW/SIGNODE],+0.79MM +0.05/-0.025
 - Or [CSP880/SAM HWAN],+95 KG/MM2, 420-450 KG/ROLL

100% KOREA Origin

SIGNODE
Vietnam

32090 BW SJW(GRADE SAE1022)
Signode Straps
Dâyđai đóng bao độ cứng caoUSSG#21 0.89mmx31.8mmW Độbềnkéo>840(N/mm2),Độ giãn dài>6.5%-12% Sơn màu xanh,làm sạch bavia
material(鋼帶材質)
Tiêu chuẩn chất lượng carbon steel(碳鋼)
Strap Width(鋼帶寬度)
Tiêu chuẩn chất lượng 31.75±0.13mm
Strap thickness(鋼帶厚度）
Tiêu chuẩn chất lượng 0.89±0.05mm
Surface treatment(表面處理 )
Tiêu chuẩn chất lượng Blue and Waxed,deburred edges(藍化處理上蠟,需修毛邊,單捲不允許有鋼帶對焊接帶)
Camber (max/2.4m)((偏曲量(max/2.4m))
Tiêu chuẩn chất lượng <12 mm
Tiwst (max/2.4m)(扭曲量(max/2.4m）
Tiêu chuẩn chất lượng 20°
Min Tensile strength (最小抗拉強度)
Tên quy cách 抗拉強度依照ASTM D3953進行測試(鋼帶直接取樣進行拉伸試驗)
Min Tensile strength (最小抗拉強度)
Tên quy cách 未符合其中規範標準，由買方依照檢驗規範研判是否允收轉用(需折讓35%金額)，允收條件：抗拉強度>670(N/mm²)
Elong.(GL=152mm)(伸長率(GL152mm))
Tên quy cách 延伸率GL=152mm按照ASTM D3953進行測試(鋼帶直接取樣進行拉伸試驗)
Elong.(GL=152mm)(伸長率(GL152mm))
Tên quy cách 未符合其中規範標準，由買方依照檢驗規範研判是否允收轉用(需折讓35%金額)，允收條件:延伸率(GL=152)：0.5-12%
Tên quy cách Strap Coil Outside diameter(鋼帶盤元外徑)
Tiêu chuẩn chất lượng 800-900mm
Strap Coil Inside diameter(鋼帶盤元內徑)
Tiêu chuẩn chất lượng 370-500mm
Strap Coil Height(鋼帶盤元高度)
Tiêu chuẩn chất lượng 150-300mm
Strap Coil weight(鋼帶盤元重量)
Tiêu chuẩn chất lượng 400-460KG
Mechanical properties(機械性質)
Tiêu chuẩn chất lượng High strength and toughness (高強韌鋼帶)
Certificate of Origin and material(提供產地證明及材質證明)
Test report(出廠測試報告)
Tiêu chuẩn chất lượng Material(材料)、stretching test(拉伸試驗)、dimension(尺寸)
In 5-7 days after quote the seller are need to provide samples (12 pieces, 500mm L / 1 piece) to the FHS for test the tensile strength

100% USA Origin

SIGNODE
Vietnam

Pneumac combinaon toolfor steel strapping
Model: PNSC2-58

100% USA/Thailand Origin

Signode
Vietnam

SEAL VALVE SLEEVE
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 423964

100% USA/Thailand Origin

Signode
Vietnam

SEAL MOTOR ASSY
(Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 423980

100% USA/Thailand Origin

Signode
Vietnam

FRAME
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 427986

100% USA/Thailand Origin

Signode
Vietnam

UPPER WELD GRIPPER
(Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 427989

100% USA/Thailand Origin

Signode
Vietnam

LOWER WELD GRIPPER MACH
 (Spare parts of VTI19/25 pneumatic friction weld sealer)
Part no: 424482

100% KOREA Origin

SIGNODE
Vietnam

Steel strap
• ITEM : 0.8X32
 • GRADE : SAE1022
• SURFACE : BLUE & WAXED
• ROLL TYPE: JUMBO
Technical Requirements:
• Tensile strength (TS) - Quality standard > 840 MPa = 840 N/mm2 (~ 84 kg/mm2)
 • Elongation rate - Quality standard 6.5 - 12%
• Surface treatment - Quality standard (blue and waxed) with oxidation treatment, not using welding method to connect steel wire
• Inner radius for a roll: 406 mm
 • Outside radius for a roll: 630mm
• Width for a roll: 150mm -190mm (each roll has the smallest width: 150mm, the largest width is 190mm)
• Certificates of Origin and manufacturer’s other documents regarding the testing report,..

100% THAILAND Origin

SIGNODE
Vietnam

P/N: 423412
PIVOT SHAFT
SPARE OF PRHR-114

100% Switzerland Origin

Signode
Vietnam

Battery Powered Tool for steel strapping
Model: BPT-L19

100% Thailand Origin

Signode
Vietnam

Seal valve stem (key: 33)
Parts for Strapping Tool
Part no: 423947

100% Thailand Origin

Signode
Vietnam

Check valve ASSY
Parts for Strapping Tool
Part no: 424376

100% Thailand Origin

Signode
Vietnam

Battery-powered tool for plastic strapping 16-19mm
Model: BXT3-19

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.047.037
 Tensioning wheel for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.209.041
Knife for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.048.031
 Tooth plate for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1832.011.317
LCD operating unit for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1821.035.011
 Bolt for SIGNODE strapping tools (BXT3-19)

100% THAILAND /USA Origin

SIGNODE Vietnam

Part Number 1933.210.120
 Needle bearing for SIGNODE strapping tools (BXT3-19)

100% USA/India Origin

SIGNODE
Vietnam

M410N-114-EHT3-1H-A
 Rotating Eye strapping machine for hot application includes
 - Base Frame with Retraction,
- DPAM 1000 dispenser for 450 Kg steel strap coil.
- Pneumatics system with quick disconnect manifold block for strapping head.
- Electricals with S7 1500 PLC (Non Fail Safe PLC) with 9’ HMI.

100% Thailand Origin

SIGNODE
Vietnam

Model RCD-1431
Heavy-Duty Sealers Side-Action

100% Thailand Origin

SIGNODE
Vietnam

Model TH-114
Feedwheel Tensioners